• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.58-62
• /
• 2007

Digital communication is important for reliability and mobilization of the multi-channel communication systems. Transmitting and receiving data for the mobilization should be possible in anywhere and in anytime. And this system must be designed light weight small size and low power. One are essential technology for implementing the mobile wireless communication system on the age of ubiquotos. Requirements in constructing such communication field are followings. At first data transmitting and receiving should be carried out by a simple command. Second, the device should be designed as hand-hold type and low power consumption. Third, data communication should be reliable. As one of examples, car to car system which is popular in the market is introduced here, All traffic information in highway is transmitted from one car to another by using this system which can prevent possible traffic accident. This paper shows the design of a digital data communication system with CC1020 chip. This CC1020 makes easy frequency selection and easy switch from the transmit mode to the receive mode by simple setting of a memory register in the chip. The transmit power of this system is designed 10dBm and its communication range is about 100m. The power supplied this system is 3V considered as low power. The sleep mode can be easily entered during transmit mode or receive mode. We shows the program algorithm of CC1020 and interface circuit between MCU and CC1020. We shows the Photo of the CC1020 Module and Atmega128 Module.. We analysed the receiver rate with this system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.833-838
• /
• 2011

RFID system in manufacturing industry is used to collect, categorize, and process the data of products. To install RFID system for a large factory, a large amount of wired data communication network is necessary for RS232 communication. If the installed location of RFID system in the factory is changed or extended, a reinstallment is required for the already installed wired data network. A large amount of time/financial reinvestment is necessary for such reinstallation. By using wireless data communication network, however, the initial installation and reinstallation are very simple. In this paper, we implemented a wireless communication system and RFID system. We used the CC1020 chip for wireless communication system and EM4095 chip for RFID system. CC1020 chip enables highly-reliable data communication, and by setting a simple status register, it can switch between transmitting/receiving status and it can choose the desired frequency of either 400 MHz or 900 MHz. Also, Communication range is 50 m, if external antenna is used. EM4095 is a chip for RFID reader system with the carrier frequency of 125 KHz. This chip can implement the reader system by connecting a small number of components. And EM4100 was used for RFID system. EM4100 is read-only type. Atmega128 is used to control a wireless communication system and RFID system. We confirm that the system can communicate without error up to 50 m from sender. In the paper, the circuit diagram and operation program for CC1020 and RFID system are presented. The system used in the experiment is shown in pictures, and the data movement pattern of CC1020 is shown in the diagram, and the performance of each transmission method is presented.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.347-352
• /
• 2005

유비쿼터스라는 새로움 페러다임의 도래로 인해 많은 IT산업이 이를 중심으로 많은 발전을 하고 있다. 이러한 유비쿼터스 관련 산업에 있어서 상당 부분 무선 통신기술인 RF를 기반으로 하고 있으며, 이를 활용하여 RFID 시스템 및 센서 네트워크 등이 발전하고 있는 추세이다. 본 논문에서 이러한 무선 통신기술에 적합한 저전력 저전압 Wireless UHF 트렌시버인 CC1020 칩을 이용하여 무선통신시스템을 구현하였다. 이 시스템을 제어하기 위해 MCU와의 Interface를 구성하고 CC1020 칩의 레지스터를 설정하기 위해 4선의 직렬 구성 인터페이스로 모토로라사에서 개발된 근거리용 고속 직렬 동기식 통신규격인 SPI 방식을 이용하였다. 따라서 레지스터 종류 및 설정순서와 타이밍에 대한 내용과 MCU와의 인터페이스 중심으로 설명하였으며, 시스템을 구현하고 실험을 통해 신호의 파형과 데이터 송수신을 확인하였다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.343-346
• /
• 2005

유비쿼터스 시대의 도래로 인해 많은 IT업체는 유비쿼터스 핵심기술을 기반으로 발전하고 있다. 이러한 유비쿼터스 핵심기술의 상당부분은 무선통신기술 RF를 이용한 것이며 이를 활용하여 RFID 시스템 및 Ubiquitous Sensor Network 등을 구축할 수 있다. 본 논문에서는 이에 적합한 400/800MHz ISM/SRD 밴드대역을 사용하는 무선 트렌시버 단일 칩인 CC1020을 이용하여 하드웨어를 구성 하였다. CC1020칩을 사용하면 저전력, 고감도, 적은 주변회로 구성 등 많은 이점이 있으며 주파수원 고정과 필터링 및 전원공급상태 그리고 PC와의 interface등의 하드웨어를 쉽게 구현할 수 있다. 따라서 이러한 각 주변회로 구성에 대해 설명하고 실제 구현을 통해 DATA의 송수신실험을 통해 하드웨어의 특성을 확인 하였다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2006.06a
• /
• pp.105-108
• /
• 2006

무선인지(RFID)시스템은 많은 산업 분야에 적용되고 있다. 대표적인 예로써 RFID 시스템을 이용한 출입 관제시스템을 들 수 있으며, 이런 경우 기존의 건물에 이 시스템을 설치하려고 하면 출입문을 개조하여야 한다. 하지만 무선 통신을 이용하면, 리더기에서 호스트 컴퓨터로의 접근이 용이해지므로 출입문 개조에 있어서도 한결 수월해진다. 이 때 필요한 것이 무선 디지털 데이터 통신 기술과 원격지에서 Tag의 ID를 모니터링을 위한 TCP/IP를 이용한 Ethernet 통신이다. 본 논문에서는 이러한 시스템의 개발방법에 대해 설명하였으며 RFID 리더기는 125KHz를 사용 주파수로 하고, Tag 칩은 Microchip사의 MCRF 250을 사용하였다. 그리고 무선 데이터 통신을 위해서 CC1020칩을 사용하였으며 이 칩의 장점은 간단히 레지스터를 설정으로 송신 상태 혹은 수신 상태로 변환이 가능하고 또한 주파수 설정도 가능하다는 것이다. 마지막으로 Ethernet 통신을 위해서는 W3100A칩을 이용하였으며, Ethernet 통신에 있어 OS가 차지하는 부분으로 하드웨어를 통해 구현하였다. 실험을 위해 하드웨어를 구성하고 각 모듈별 동작을 분석하고. 각 부분의 파형을 확인하였다. DB에 해당하는 Application을 통해 Tag ID DATA를 확인하였다.

• Korean Journal of Food Science and Technology
• /
• v.21 no.4
• /
• pp.521-527
• /
• 1989

This study was conducted to investigate the differneces in milling, physicochemical, rheological and end-product properties between Korean and American wheat cultivars. Also, rheological and bread baking properties of Korean wheat flour in blends with U.S. standard flour were investigated. The milling yield of Korean wheat rated 71.1% similar to 71.6% of U.S. wheat. The average AWRC 61.8% of the three Korean wheats ranked higher than the conventional value of 60% for classifying hard and soft wheat. The cookies made from Korean wheat flour showed comparatively good spread with diameter of 8.5-8.9 cm, and marked recommendable top grain score. The volume ranges 975-1175 cc of sponge cake made from all cultivars tested were lower about 4-26% than that of standard cake flour. especially, Wonkwang was selected as one which has special characteristics good for cookie and sponge cake. The volumes of breads from Korean wheat 리ours ranged 924-1020 cc, and Yongkwang of 1020cc marked the most appropriate characteristics for bread-making among the tested wheats. The proper blending ratio of Korean wheat flour to U.S. bread standard flour was revealed 30% in bread-making.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2641-2646
• /
• 2009

The more growing on home automation system at automatic control, the more efficiency required for energy consumption and for recycling energy in near future. Heating is essential in general apartment. Heating method is two types in apartment. One uses electricity, and other one uses warm water. If use electricity, is not efficient by rise of electric charges. But, It can reduce much in expense aspect, if use warm water. When use warm water, temperature of warm water is not equal from all pipe parts. Therefore, indoor tempera can be unequal with set point. Solution of these problems is as following. Temperature sensor in warm water attach pipe. The measured temperature transmits by real time. Temperature of warm water controls in receiver side. In this paper, we propose an automatic temperature transmission system for the heating pipe at home, that is a low-power based, and supply the energy source from a small AC motor resided in bottom cement mortal. The proposed system is used in power mechanism from a collision process of water-jet using propeller water-difference and also designed a CPU module by Atmega8 at ATMEL co., Inc. and a communication module by CC1020 at Chipcon co., Inc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1020-1027
• /
• 2005

In this paper, economic miniature RF transmitter module for intelligent transportation system(ITS) is described. This module which consists of ASK modulator, frequency synthesizer, power amplifier is operating at 5.8 GHz frequency band and implemented by using LTCC process technique. Thus, ultra small size of 0.8 CC and improved electrical performances has been obtained. From the test results, transmitting characteristics of 10 dBm ouput power and -46 dBc interchannel interference with 1.024 Mbps ASK modulated have been shown. Frequency synthesizer as a transmitting signal source reveals very short locking time of 26 usec and outstanding phase noise of -115 dBc/Hz at 1 MHz offset from 5.8 GHz center frequency.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.3
• /
• pp.117-122
• /
• 2007

In this paper, we described a design and implementation of a sensor node for environmental monitoring. The main focus of design for sensor nodes is to isolate MCU for treating sensors from the RF module for considering various communication environment. The second is to make the interface between MCU and varity of sensor. In addition, we choose a narrow band communication module, cc1020, for the admittance of Korea government communication law. We also use a uC/OS-II as an operating system which is famous for 8bit MCUs. We showed that the communication performance is sufficient to use the communication module in a out-door environment through several experiments in that it is possible to transmit between 100m distance through experiments in a mountain.

• Proceedings of the KIEE Conference
• /
• 2007.11c
• /
• pp.77-82
• /
• 2007

In this paper, we described a design and implementation of a sensor node for environmental monitoring. The main focus of design for sensor nodes is to isolate MCU for treating sensors from the RF module for considering various communication environment. The second is to make the interface between MCU and varity of sensor. In addition, we choose a narrow band communication module, cc1020, for the admittance of Korea government comminication law. We also use a uC/OS-II as an operating system which is famous for 8bit MCUs. We showed that the communication performance is sufficient to use the communication module in a out-door environment through several experiments in that it is possible to transmit between loom distance through experiments in a mountain.