• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.8
• /
• pp.563-569
• /
• 1999

Boron doped CdS films were prepared by chemical bath deposition using boric acid$(H_3BO_3)$ as donor dopant source, and their electrical, optical properties were investigated as a function of doping concentration. In addition, effects of boron doping of CdS films on characteristics of CdS/CdTe solar cells were investigated. Boron doping highly decreased the resistivity and slightly increased optical band gap of CdS films. The lowest value of resistivity was $2 \Omega-cm \;at\; H_3BO_3/Cd(Ac)_2$ molar ratio of 0.1. For the molar ratio more than 0.1, however, the resistivity increased because of decreasing carrier concentration and mobility and showed similar value for undoped films. The photovoltaic characteristics of CdS/CdTe solar cells with boron doped CdS film improved due to the decrease of the conduction band-Fermi level energy gap of CdS films and the series resistance of solar cell.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.4
• /
• pp.287-294
• /
• 2002

Objectives : To examine whether cumulative chronic stress influences the immune status, and to verify the effect of social support on the relationship between these two dimensions in male manufacturing workers. Methods : A total of 39 workers were recruited for this study. A structured-questionnaire was used to assess general characteristics, job characteristics (work demand and decision latitude), psychosocial distress, and social support. The serum levels of CD4 and CD8 were measured as immune markers, and were collected between 8:00 and 10:00am in order to standardize the markers. Nonparametric statistics were used to estimate the differences between job characteristics and the immune markers. Results : General characteristics, and health-related behaviors, were not associated with CD4, CD8 or CD4/CD8. No relationships were found between job characteristics and the mean levels of immune reactivity. These results were consistent, even after controlling for social support. Social support failed to modify the relationship toward work demand, decision latitude or psychosocial distress to CD4, CD8, and CD4/CD8. Conclusion : Cumulative chronic life stress might not influence the immune status, and the effects of social support on the immune function under chronic stress, may not play a crucial role in modifying the relationships. This implication supports that the effect of stress on the immune function may be determined by the characteristics of that stress. further research should effectively considers the type, magnitude and timing of a stress event, and modifiable factors, such as personality traits, coping style, and hormone excretion levels, on the alteration of immune status.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.412-420
• /
• 1999

A controlled column study using elution development and miscible displacement was conducted to assess heavy metal transport characteristics in sludge-untreated soil ("Control"), soil treated with an equivalent of sludge 50 and 100 dry ton $ha^{-1}$ ("Soil-Sludge mixtures"), and sewage sludge ("Sludge"). The elution curves (ECs) and the breakthrough curves (BTCs) for Cd, Cu and Zn in sludge 50 and 100 dry ton $ha^{-1}$ treated soils are not different from the sludge-untreated soil, The ECs for Cd, Cu and Zn in soil column which received a pulse of 10 mg of each Cd, Cu and Zn were similar to those of Cd, Cu and Zn in soil column which had no Cd, Cu and Zn added, but were very different with the ECs for Cd, Cu and Zn in soil column which received a pulse of Cd, Cu and Zn containing 50 mg of each metal. On the other hand, the BTCs for Cd, Cu and Zn in soil columns that were eluted with 500 and $1000mg\;L^{-1}$ of mixed solution of Cd, Cu and Zn were similar to each other, but were distinctly different with the BTCs for Cd, Cu and Zn in soil column that was eluted with $100mg\;L^{-1}$ mixed solution of Cd, Cu and Zn. Sewage sludge applied at rates of 50 and 100 dry ton $ha^{-1}$ did not affect the transport characteristics of this calcareous soil. The apparent mobility for this sludge treated soil and sludge is: Cd >Zn>Cu. The transport characteristics of Cd and Zn are similar to each other, but are different from those of Cu.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.121-121
• /
• 1997

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1349-1354
• /
• 2011

In this work, we fabricated the CdZnS/CdTe heterojunction and investigated the C-V characteristics to determine the depletion width and the charge density distribution. A parallel experiment on CdS/CdTe heterojunction was also carried out for comparison. The depletion region width, for CdZnS/CdTe heterojunction, was nearly constant, regardless of bias voltage. However, the depletion region was wider than that of CdS/CdTe heterojunction due to high resistivity of CdZnS film. The interface charge density of CdZnS/CdTe heterojunction was increased linearly with the bias voltage and showed lower values than those for CdS/CdTe junction. The open circuit voltage of CdZnS/CdTe heterojunction solar cells increased with zinc mole ratio due to reducing of the electron affinity difference between CdZnS and CdTe films. However, the increase of series resistance due to the high resistivity of Cd1-xZnxS films results in reducing conversion efficiency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.126-130
• /
• 1995

$CdS_{1-x}Te_{1-x}$ polycrystalline thin films were fabricated from CdS and CdTe powder by co-evaporation method at $10^{-6}$ Torr. The Optimum evaporation condition was substrate temperature $T_{s}$=$150^{\circ}C$, evaporation time t=30 min. XRD spectrums indicated that the crystal structure chanced from zinc blonde (x$\leq$0.22) to wurtzite (x$\geq$0.96) through mixed structure (0.22$\leq$0.74) as composition value x increase to CdS. Conductive type was n-type by hot point probe method. van der Pauw method was not applicable for x<0,5 due to high hall voltages, Electrical resistivity and Hall carrier mobility were decreased as x increase, while Hall carrier concentration was increased. The optical bandgap of $CdS_{1-x}Te_{1-x}$ polycrystalline thin films measure d at R.T. had quardratic form and the bowing parameter was fitted as 1.98eV for theoretical value of 2.0eV. I-V characteristics of In/CdTe/$CdS_{x}Te_{1-x}$Au Schottky diodes showed that CdS-rich one had better forward characteristics than CdTe-rich one.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1174-1177
• /
• 1995

In this paper, electrical properties CdS/CdTe heterojunction solar cell prepared by electron beam evaporation method were investigated. Crystal structure of CdS films deposited at substrate temperature of $50{\sim}250^{\circ}C$ was hexagonal type with preferential orientation of the (002)plane parallel to the substrate. Optical transmittance of the CdS film is increasing and resistivity is decreasing with increasing subsrate temperature. CdS/CdTe Solar cell characteristics were improved by increasing of substrate and annealing temperature. However, low efficiency due to small Jsc, Voc below 0.3 $mA/cm^2$ and 430 mV are observed. Low efficiency is contributed to be high resistance of CdTe films and contact.

• Journal of Environmental Health Sciences
• /
• v.28 no.5
• /
• pp.65-70
• /
• 2002

Recently, surfactants were frequently used in order to desorb the hydrophobic organic compounds (HOCs) from soil and to enhance the bioavailability. Among them, -cyclodextrin ($\beta$-CD) is one of those. This study was performed to investigate the binding characteristics between benzene and $\beta$-CD and to examine the bioavailability of benzene. First, we investigated binding characteristics between benzene and $\beta$-CD in water and water/soil system. Then, we examined the effect of $\beta$-CD on the biodegradation of benzene in water and water/soil system. Experimental results on the binding characteristics showed that $\beta$-CD resulted in an efficient complex formation with benzene. As -CD concentration increased, the benzene concentration complexed with $\beta$-CD rapidly increased to 30-40% initial benzene added, and reached the equilibrium. We also investigated the effect of $\beta$-CD on the desorption of benzene from soil in the water/soil system. As $\beta$-CD concentration increased, benzene concentration desorbed into water increased up to 90%. How-ever, in its application to biodegradation of benzene in water and water/soil system, the biodegradation rate of benzene did not improved in the presence of $\beta$-CD compared with in the absense of $\beta$-CD. This result indicated that $\beta$-CD was more preferentially used as a carbon source than benzene. Therefore, for remediation of benzene contaminated soils, $\beta$-CD can be used as a surfactant to desert benzene from soil, and then ex-situ chemical treatment can be applied for the remediation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1677-1685
• /
• 2004

Recently, FD (Frame Dropping)-CD (Coefficient Dropping) transcoding is considered due to the low computational complexity and simple implementation. The conventional FD-CD transcoding schemes have not considered the CD errors that tend to be propagated and accumulated. In this paper, we derive the error characteristics incurred by the CD errors and, through computer simulations, we show that the CD errors are propagated and not negligible to the decoded qualities of the next frames within single GOP. Then, we propose an exponential-decaying model that describes well the characteristics of propagation/accumulation errors. Finally, it is shown that the proposed model can be effectively used for estimating the overall distortions incurred by the CD errors.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1146-1150
• /
• 2009

Cadmium telluride (CdTe) is one of the most attractive photovoltaic materials due to its low cost, high efficiency and stable performance in physical, optical and electronic properties. Few researches on the influences of uniform surface on the photovoltaic characteristics in large-area CdTe solar cell were not reported. As the preceding study of the effects of thickness-uniformity on the photovoltaic characteristics for the large-area CdTe thin film solar cell, chemical mechanical polishing (CMP) process was investigated for an enhancement of thickness-uniformity. Removal rate of CdTe thin film was 3160 nm/min of the maximum value at the 200 $gf/cm^2$ of down force (pressure) and 60 rpm of table speed (velocity). The removal rate of CdTe thin film was more affected by the down force than the table speed which is the two main factors directly influencing on the removal rate in CMP process. RMS roughness and peak-to-valley roughness of CdTe thin film after CMP process were improved to 96.68% and 85.55%, respectively. The optimum process condition was estimated by 100 $gf/cm^2$ of down force and 60 rpm of table speed with the consideration of good removal uniformity about 5.0% as well as excellent surface roughness for the large-area CdTe solar cell.