• Textile Coloration and Finishing
• /
• v.18 no.5 s.90
• /
• pp.72-79
• /
• 2006

There are many discrepancies between visually perceived color-difference and that which is quantified from an instrumental measurement when dark color samples are measured in the textile industry. The samples were prepared to represent these dark shades and the values of the instrumental results from conventional color-difference formulae(CIELAB, CMC, BFD II, CIE94, LCD99 and CIEDE2000). Those of visual assessment were compared. The experimental results show that the CIELAB formula gives the best performance over other formulae, and the CIEDE2000 formula for the color-difference according to chroma presents the worst performance. Therefore, we can say that the problems in color matching of dark shades are caused by imperfect formula, because the results obtained from a color-difference formulae are different and the CMC which is used as a standard color-difference formula in the textile industry is not correct. So, a revised color-difference formula is proposed in this study, to account for these problems.

• Textile Coloration and Finishing
• /
• v.18 no.5 s.90
• /
• pp.80-87
• /
• 2006

A new fastness formula based on the CIEDE2000 color-difference formula was developed by B. Rigg and his coworkers. It is much simpler to calculate the staining fastness grade than the ISO 105-A04 fastness formula based on the CIELAB color-difference formula. Sample pair sets, which cover a wide color space range were accumulated from the NCS(Natural Color System) color book. for those sample pair sets, a visual measurement experiment and an instrumental measurement experiment of fastness grade were carried out. Each performance of the ISO 105-A43 fastness formula and newly developed fastness formula was compared through degree of agreement for visual measurement results. The newly developed fastness formula indicated improved performance for measuring fastness grade as it was confirmed that the performance of the current ISO fastness formula ISO 105-A04 for assessing staining, was inadequate for measuring fastness grade. Then the fastness formulae were examined more closely according to the particular color spaces and the correlation of hue, lightness and chroma for measuring staining fastness grade was also considered to recommend more improved fastness formula. By modifying the weighting functions of CIEDE2000, which is a basis of new fastness formula developed by B. Rigg, a modified fastness formula is proposed in this study.

• Textile Coloration and Finishing
• /
• v.18 no.2 s.87
• /
• pp.15-23
• /
• 2006

A new fastness formula based on CIEDE2000 color-difference formula is developed by B. Rigg and his coworkers. It is very simple to calculate fastness grade for color change than ISO 105-A05 fastness formula based on CIELAB color-difference formula. Sample pair sets which cover a wide range color space were accumulated from NCS(Natural Color System) color book. For those sample pair sets, visual measurement experiment and instrument measurement experiment of fastness grade were carried out and each performance of ISO 105-A02 fastness formula and newly developed fastness formula was compared through degree of agreement for visual measurement result. Newly developed fastness formula indicated improved performance for measuring fastness grade but current ISO fastness formula for assessing change in color, ISO 105-A05, was confirmed that it's performance is inadequate to measure fastness grade. Then fastness formulae were examined more closely according to particular color spaces and the correlation of hue, lightness and chrom for measuring fastness grade was also considered in this study.

• Science of Emotion and Sensibility
• /
• v.15 no.3
• /
• pp.381-388
• /
• 2012

The purpose of this study is to check if LED lighting can be used as general lighting and examine the color rendering property of full color RGB LED lighting. CRI is one of the important properties of evaluating lighting. However the present CRI does not fully evaluate LED lightings. Firstly, the performance of a simple task was compared other than comparing CRI values for different lighting. For experimental preparation three types of lightings were used; standard D65 fluorescent tube, general household fluorescent tube, and RGB LED lighting. All three lightings show high error for Purple-Red. All three lightings show similar error for all hues and prove that color discrimination is not affected by the lighting. This proves that LED could be used as general lighting. Secondly, problems of the conventional CIE CRI method are considered and new models are suggested for the new lighting source. Each of the models was evaluated with visual experiment results obtained by the white light matching experiment. The suggested model is based on the CIE CRI method but replaces the color space model by CIELAB, color difference model by CIEDE2000, and chromatic adaptation model by CAT02.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.5
• /
• pp.239-246
• /
• 2019

PURPOSE. The purpose of this study was to propose and assess a shade guide for pink gingival aesthetics using a Spanish population sample. MATERIALS AND METHODS. The $L^*$, $C^*$, h, $a^*$ and $b^*$ coordinates of 259 participants were measured using a spectrophotometer in 3 standardized points along the attached gingiva of the maxillary central incisors. A hierarchical clustering analysis was applied to obtain separate solutions regarding the number of shade tabs. For each of the solutions obtained, color differences (${\Delta}E^*$) were calculated using the CIELab and CIEDE2000 formulas, and the proposed shade guide was selected considering (1) the color differences between tabs and (2) the coverage error of each of the solutions. RESULTS. The proposed shade guide consisted of 8 gingival shade tabs and achieved CIELab and CIEDE2000 coverage errors of less than the respective 50:50% acceptability thresholds (${\Delta}E^*=4.6$ units and ${\Delta}E_{00}=4.1$). The coordinates for the various gingival shade tabs were as follows: Tab 1: $L^*43.3$, $a^*21.9$, $b^*12.3$ (1.6); Tab 2: $L^*42.9$, $a^*34.1$, $b^*19.1$; Tab 3: $L^*46.5$, $a^*25.8$, $b^*10.9$; Tab 4: $L^*46.5$, $a^*27.3$, $b^*15.1$; Tab 5: $L^*49.6$, $a^*23.5$, $b^*16.8$; Tab 6: $L^*51.5$, $a^*19.7$, $b^*13.6$; Tab 7: $L^*55.9$, $a^*22.0$, $b^*15.0$; and Tab 8: $L^*56.0$, $a^*19.9$, $b^*18.8$. CONCLUSION. The CIELab and CIEDE2000 coverage errors for the 8 shade tabs of the proposed gingival shade guide were significantly lower than those of other guides. Therefore, despite the limitations of this study, the proposed guide is more appropriate for matching gingival shade in the Spanish general population.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.132-145
• /
• 2009

We present the framework for JND based Illumination and Color Restoration Using Edge-preserving filter for restoring distorted images taken under the arbitrary lighting conditions. The proposed method is effective for appropriate illumination compensation, vivid color restoration, artifacts suppression, automatic parameter estimation, and low computation cost for HW implementation. We show the efficiency of the mean shift filter and sigma filter for illumination compensation with small spread parameter while considering the processing time and removing the artifacts such as HALO and noise amplification. The suggested CRF (color restoration filter) can restore the natural color and correct color distortion artifact more perceptually compared with current solutions. For the automatic processing, the image statistics analysis finds suitable parameter using JND and all constants are pre-defined. We also introduce the ROI-based parameter estimation dealing with small shadow area against spacious well-exposed background in an image for the touch-screen camera. The object evaluation is performed by CMC, CIEde2000, PSNR, SSIM, and 3D CIELAB gamut with state-of-the-art research and existing commercial solutions.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.777-782
• /
• 2014

This paper proposes an RGB to RGBY color conversion algorithm for liquid crystal display (LCD) using RGW pixel structure with two-field (yellow and blue) sequential driving method. The proposed algorithm preserves the hue and saturation of the original color by maintaining the RGB ratio, and it increases the luminance. The performance of the proposed RGBY conversion algorithm is verified using the MATLAB simulation with 24 images of Kodak lossless true color image suite. The simulation results of average color difference CIEDE2000 (${\delta}E^*_{00}$) and scaling factor are 0.99 and 1.89, respectively. These results indicate that the average brightness is increased 1.89 times compared to LCD using conventional RGB pixel structure, without increasing the power consumption and degrading the image quality.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.1
• /
• pp.38-47
• /
• 2024

PURPOSE. This study aims to evaluate the accuracy of different shade selection techniques and determine the matching success of crown restorations fabricated using digital shade selection techniques. MATERIALS AND METHODS. Teeth numbers 11 and 21 were prepared on a typodont model. For the #11 tooth, six different crowns were fabricated with randomly selected colors and set as the target crowns. The following four test groups were established: Group C, where the visual shade selection was performed using the Vita 3D Master Shade Guide and the group served as the control; Group Ph, where the shade selection was performed under the guidance of dental photography; Group S, where the shade selection was performed by measuring the target tooth color using a spectrophotometer; and Group I, where the shade selection was performed by scanning the test specimens and target crowns using an intraoral scanner. Based on the test groups, 24 crowns were fabricated using different shade selection techniques. The ΔE values were calculated according to the CIEDE2000 (2:1:1) formula. The collected data were analyzed by means of a one-way analysis of variance. RESULTS. For the four test groups (Groups C, Ph, S, and I), the following mean ΔE values were obtained: 2.74, 3.62, 2.13, and 3.5, respectively. No significant differences were found among the test groups. CONCLUSION. Although there was no statistically significant difference among the shade selection techniques, Group S had relatively lower ΔE values. Moreover, according to the test results, the spectrophotometer shade selection technique may provide more successful clinical results.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.3
• /
• pp.252-258
• /
• 2018

PURPOSE. The purpose of this study was to evaluate the repeatability and matching accuracy between two identical intraoral spectrophotometers. MATERIALS AND METHODS. The maxillary right central incisor, canine, and mandibular left central incisor of each of 30 patients were measured using 2 identical intraoral spectrophotometers with different serial numbers (EasyShade V). The color of each shade tab from 3 shade guides (VITA 3D-Master) was also determined with both devices. All measurements were performed by a single operator. Statistical analyses were performed to verify the repeatability, accuracy, and the differences between the devices with paired t-tests, one-way ANOVA, and intra-class correlation coefficients (ICCs) (${\alpha}=.05$). RESULTS. A high level of measurement repeatability (ICC>0.90) among $L^*$, $a^*$, and $b^*$ color components was observed within and between devices (P<.001). Intra-device matching agreement rates were 80.00% and 81.11%, respectively, while inter-device matching agreement rate was 51.85%. ANOVA revealed no significant different color values within each device, while paired t-test provided significant different color values between both devices. The CIEDE2000 color differences between both devices were $2.28{\pm}1.61$ ${\Delta}E_{00}$ for in-vivo readings. Regarding the clinical matching accuracy of both devices, ${\Delta}E_{00}$ values between teeth and matching shade tabs were $3.05{\pm}1.19$ and $2.86{\pm}1.02$, respectively. CONCLUSION. Although two EasyShade V devices with different serial numbers show high repeatability of CIE $L^*$, $a^*$, and $b^*$ measurements, they could provide different color values and shade for the same tooth.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.5
• /
• pp.394-401
• /
• 2017

PURPOSE. The purpose of this study was to compare the optical properties of pre-colored dental monolithic zirconia ceramics of various thicknesses sintered in a microwave and those in a conventional furnace. MATERIALS AND METHODS. A2-shade of pre-colored monolithic zirconia ceramic specimens ($22.0mm{\times}22.0mm$) in 3 thickness groups of 0.5, 1.0, and 1.5 mm were divided into 2 subgroups according to the sintering methods (n=9): microwave and conventional sintering. A spectrophotometer was used to obtain CIELab color coordinates, and translucency parameters and CIEDE2000 color differences (${\Delta}E_{00}$) were measured. The relative amount of monoclinic phase ($X_m$) was estimated with x-ray diffraction. The surface topography was analyzed by atomic force microscope and scanning electron microscope. Statistical analyses were conducted with two-way ANOVA (${\alpha}=.05$). RESULTS. There were small interaction effects on CIE $L^*$, $a^*$, and TP between sintering method and thickness (P<.001): $L^*$ (partial eta squared ${{\eta}_p}^2=0.115$), $a^*$ (${{\eta}_p}^2=0.136$), and TP (${{\eta}_p}^2=0.206$), although higher $b^*$ values were noted for microwave sintering regardless of thickness. Color differences between two sintering methods ranged from 0.52 to 0.96 ${\Delta}E_{00}$ units. The $X_m$ values ranged from 7.03% to 9.89% for conventional sintering, and from 7.31% to 9.17% for microwave sintering. The microwave-sintered specimen demonstrated a smoother surface and a more uniform grain structure compared to the conventionally-sintered specimen. CONCLUSION. With reduced processing time, microwave-sintered pre-colored dental monolithic zirconia ceramics can exhibit similar color perception and translucency to those by conventional sintering.