• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.363-369
• /
• 2014

This study was conducted to investigate the quality characteristics of tofu prepared with addition of cowpea meal (CPM). Any significant difference of L-value between control CPM-O and treatment CPM-I, CPM-II and CPM-III could not be seen as addition ratio of CPM increases (p < 0.05). The b-value of CPM-III (75%) has shown the least value of 14.26, and it has decreased as addition ratio of CPM increases. The result of texture profile did not show any significant difference between control CPM-O and CPM-Iexcept in the case of cohesiveness. The pH range of treatments was 6.36~6.52, which showed no significant difference from controls. The values of turbidity were 1.46~1.81, which had increasing trend as addition ratio of CPM increases. The total bacterial count of CPM-III was $4.40{\times}10^2CFU/g$, which showed significant difference from the control. No Esterichia coli was detected in the control and the treatments. The result of sensory analysis of the treatment CPM-I did not show any significant difference from the control, which implied the treatment CPM-Iwas found to be suitable at the tofu making using byproducts of cowpea-jelly making. Isoflavone glycoside (IG) was contained more on the order of genistin, daidzin, and glycitin, and the content decreased significantly as addition ratio of CPM increases. The content of isoflavone-aglycone (IA) was less than IG, but showed similar behavior of addition ratio of CPM.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1515-1517
• /
• 2008

The purposes of this study were to measure the ranges of motion in knee joint and during continuous passive motion(CPM) treatment and to computationally calculate joint angles at the knee joint dependent on the CPM machine design and its application. Four CPM machines and eleven candidates were recruited for this study. Experimental and numerical studies have been peformed to calculate the range-of-motion of CPM machines. From the experimental measurements, the average range of motions at the knee joint for the CPM machine #1, #2, #3, and #4 were lower than the manufactures suggested values due to improper alignments of the hip and knee joints to the CPM machines. Different design of CPM machine generated different outcomes of the ROM at the knee joints during CPM. The experiments and kinematic simulation in this study could be used to provide useful guidance in the treatment of CPM after joint surgery.

• Korean journal of applied entomology
• /
• v.36 no.3
• /
• pp.277-282
• /
• 1997

Chemosterilant effect of chlorpyrifos-methyl (CPM) on the beet armyworm, Spodoptera e.rigua (Hubner) was investigated, using topical application. Egg fecundity and fertility were analyzed in the adults reared from the fifth instar larvae which were treated with sublethal doses of CPM. Though CPM reduced fecundity a little, it gave significant negative effect on egg fertility in a dose-dependent manner. Genetic analysis was performed by reciprocal crosses between treated (100 Wgllarva) and untreated individuals and showed a dominant lethal effect of CPM on egg fecundity and fertility. This results indicate that chlorpyrifos-methyl may act as a chemosterilant as well as a well-known neurotoxicant, and suggest that it can be used in genetic control program.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.10
• /
• pp.545-553
• /
• 2002

This paper is about the analysis of 3-dimensional magnetic field distribution in CPM(Convergence Purity Magnet) considering magnetization vector and the optimum design of CPM. The magnetization vector of CPM is obtained using 2-dimensional magnetization FEA(Finite Element Analysis) coupled with Priesach model. Using this magnetization vector of CPM, we analysed the 2-dimensional and 3-dimensional magnetostatic field of CPM and know that these analysis results are not equal. From experimental result, we know that the 3-dimensional analysis is accurate because the magnetic field distribution in CPM cannot be considered correctly by 2-dimensional analysis because of the shape of CPM. Finally, the optimum designing of CPM which control accurately the electron beam deflection in CRT(Cathode Ray Tube) was possible using 3-dimensional magnetic field analysis result.

• Microbiology and Biotechnology Letters
• /
• v.35 no.2
• /
• pp.98-103
• /
• 2007

To isolate probiotic lactic acid bacteria for animal, we have screened the microorganisms from chicken feces, by random selection and agar well diffusion assay. Among them, CPM-7 strain showing superior inhibitory activity against Escherichia coli was selected. By examining carbohydrates utilization, morphologic property and 16S rRNA gene sequence, CPM-7 strain was identified as Lactobacillus salivarius, then named L. salivarius CPM-7. L. salivarius CPM-7 produced thirteen enzymes in the test using API ZYM kit, and showed resistance to low pH and bile salts. It survived at pH 2 for 30 min. and pH 3 for 6 hr. And, it was able to grow in MRS medium containing 0.2% (w/v) bile salts. L. salivarius CPM-7 adhered to the jejunal epithelium cells of pig. Both the supernatant of L. salivarius CPM-7 and the its neutralized one showed high inhibitory activity against E. coli K88.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.2
• /
• pp.89-95
• /
• 1990

Ethylcellulose-PEG 4000 film coated on core tablets was investigated as a potential drug delivery system for the controlled release of chlorpheniramine maleate (CPM). The kinetic analysis of the release data indicated that CPM release followed a diffusion-controlled model, where the quantity released per unit area is proportional to the square root of time. The effect of the film composition, CPM concentration, plasticizer concentration and CPM solubility on the release characteristics were examined. The release rate constant increased as CPM concentration increased. It also increased as the PEG 4000 content in the film increased above 10%(w/w), however, it decreased as the PEG 4000 content increased in the concentration range below 10%(w/w). The release rate constant was not affected by the coated weight on the core tablet. The film-coated tablets which contain CPM only in the coated film layer seemed to be a potential oral drug delivery system for the controlled release of CPM.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.54-64
• /
• 2011

Almost 40 years have been passed since the CPM was introduced to the construction industry in Korea. However most of construction projects in Korea do not prepare the CPM schedule neither operate it after established manually, as well as still depend on the Bar-chart schedule only. One of these reasons is because the CPM schedule does not reflect the site works realistically, it makes so difficult to recognize the actual progress clearly in visual format, and it is impossible to integrate and manage the time and cost oriented work progresses effectively. This paper proposes new concept of progress management that is able to integrate and manage the time oriented schedule progress and earned value oriented cost progress while maintaining the merits of CPM although the CPM schedule summarized automatically within a schedule hierarchy by the BDM that is a new CPM technique. We expect that this concept could make the applications of CPM technique to the domestic construction industry popular and help the advancement of the construction management in Korea as well.

• The Journal of Society for e-Business Studies
• /
• v.16 no.4
• /
• pp.139-154
• /
• 2011

Recently Internet keyword search service providers tends to use CPC advertizement method rather than CPM method. However researches how much the CPC method is beneficial to advertisers than CPM method in certain perspectives are insufficient and not performed systematically. So this paper tries to do comparative analysis about the two methods by analyzing the real transactional DB data from an advertizement agency. Due to the difficulties of direct comparison between the two methods because of their different expose positions on the Web and different types of attributes in DB, we did some preprocessing step for the transactional data. From the result of analysis, the click rate of CPC is higher than CPM by 1.3% and the unit cost for the CPC per one click is lower than CPM method by 51 Won. It shows the CPC method is more effective than CPM method for advertizement from the point of advertizement effectiveness (CTR) and advertizement cost (CPC). We hope this research would give useful information to advertisers and marketing managers in making advertizement strategy, marketing decision and budgeting.

• Clean Technology
• /
• v.29 no.4
• /
• pp.279-287
• /
• 2023

Fine dust emitted from coal combustion is classified into filterable particulate matter (FPM) and condensable particulate matter (CPM). CPM is difficult to control with existing air pollution control devices, so research is being conducted to understand the characteristics of CPM. Components constituting condensable particulate matter (CPM) are divided into inorganic and organic components. There are many quantitative analysis results for the ionic components, which account for a significant proportion of the CPM inorganic components, but little is known about the organic components. Thus, there is a need for a quantitative analysis of CPM organic components. In this study, aromatic hydrocarbons (toluene, ethyl benzene, m,p-xylene, and o-xylene) and n-alkanes with 10 to 30 carbon atoms were quantitatively analyzed to understand the organic components of CPM emitted from a lab-scale coal combustor. Of the aromatic hydrocarbons, toluene accounted for 1.03% of the CPM organic components. On the other hand, the contents of ethyl benzene, m,p-xylene, and o-xylene showed low values of 0.11%, 0.18%, and 0.51% on average, respectively. Among the n-alkanes, triacontane (C₃₀) showed a high content of 2.64% and decane (C₁₀) showed a content of 2.05%. The next highest contents were shown with dodecane (C₁₂), tetradecane (C₁₄), and heptacosane (C₂₇), all of which were higher than that of toluene. The n-alkane substances that had detectable concentrations showed higher contents than ethyl benzene, m,p-xylene, and o-xylene except for tetracosane (C₂₄).

• PNF and Movement
• /
• v.2 no.1
• /
• pp.13-23
• /
• 2004

Objective : Compare the results of CPM and PNF in recovery rates when applied as an initial physical therapy. Methods : Randomly selected 19 patients who underwent through total knee replacement surgery. 23 cases were studied and divided into 12 CPM and 11 PNF cases. CPM case was carried out for 60 minutes, a maximum allowed exercise without pain. PNF case was carried out for 20 minutes by a therapist to a patient as 'one on one'. Result : Result showed that PNF treatment was increased significantly at P<0.05 in flexor muscle strength in 8 days after the surgery. Conclusion : The study revealed that in comparison with CPM, PNF was more effective treatment increase of flexor muscle strength in rehabilitation on after total knee replacement surgery.