• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.283-289
• /
• 2012

In this paper, We proposed Separate Gate Technique(SGT) to improve the switching characteristics of Trench power MOSFET. Low gate-to-drain 전하 (Miller 전하 : Qgd) has to be achieved to improve the switching characteristics of Trench power MOSFET. A thin poly-silicon deposition is processed to form side wall which is used as gate and thus, it has thinner gate compared to the gate of conventional Trench MOSFET. The reduction of the overlapped area between the gate and the drain decreases the overlapped charge, and the performance of the proposed device is compared to the conventional Trench MOSFET using Silvaco T-CAD. Ciss(input capacitance : Cgs+Cgd), Coss(output capacitance : Cgd+Cds) and Crss(reverse recovery capacitance : Cgd) are reduced to 14.3%, 23% and 30% respectively. To confirm the reduction effect of capacitance, the characteristics of inverter circuit is comprised. Consequently, the reverse recovery time is reduced by 28%. The proposed device can be fabricated with convetional processes without any electrical property degradation compare to conventional device.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.11a
• /
• pp.343-350
• /
• 2003

The best Ppy weight ratio was 7 wt% and the optimal electrode composition ratio was 78 : 17 : 5 wt.% of (MSP-20 : BP-20 =1 : 1), (Super P : Ppy =10 : 7) and P(VdF-co-HFP). Implantation of Ppy as the conducting agents have led to superior electrochemical characteristics because of the low of internal resistance and faradaic capacitance. The result of unit cell with Ppy 7 wt% were as follows: 28.02 Fig of specific capacitance, 1.34 Ω of DC-ESR and 0.36 Ω of AC-ESR. Unit cell showed a good stability up to 200 charge-discharge cycles, retaining 82% of their original capacity at 200 cycles. From the analysis of impedance, the electrodes with Ppy 7 wt% showed low ESR, low charge transfer resistance and quick reaction rate. It was inferred that quick charge-discharge was possible. As compared with the specific capacitance (rectangular shape) of CV, it was also concluded that the specific capacitance originated from thecompound phenomena of the faradaic capacitance by oxidation and reduction of Ppy and the non-faradaic capacitance by adsorption-desorption of activated carbon.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.2
• /
• pp.130-133
• /
• 2011

A comparative study of two capacitance methods to measure the effective channel length in deep-submicron MOSFETs has been made in detail. Since the reduction of the overlap capacitance in the accumulation region is smaller than the addition of the inner fringe capacitance at zero gate voltage, the capacitance method removing the parasitic capacitance in the accumulation region extracts a more accurate effective channel length than the method removing that at zero gate voltage.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.232-232
• /
• 2000

switched reluctance motors and drives are increasingly used in industrial applications due to their robust mechanical structure, low inertia and reduction in the rotor losses. As the motor speed increase turn on angle must be advanced to build up phase current. When C-dump converter is applied to switched reluctance motor, the capacitance of dump C has to have proper value. In this paper advance angle for a switched reluctance motor and capacitance of dump C are investigated. Then proper advance angle and the capacitance of dump-C are propose for the industrial low voltage SR motor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.9-13
• /
• 1995

The effect of WO$_3$ addition and sintering condition on the electrical properties of SrTiO$_3$ceramic have been investigated. Resistivity and capacitance of grains and grain boundaries were obtained by applying impedance spectroscopy. From the result it could be concluded that the temperature dependance of capacitance of WO$_3$doped specimens were influenced directly by the variation of grain boundary capacitance. It was also found that the dispersion frequency increased as the degree of reduction of the specimen increased. The dispersion frequency characteristics showed discernably that the resistivity of the specimen varied with WO$_3$ content. The dielectric properties were influenced directly by the reduction of the specimens. The dielectric constant of grain boundaries of BL capacitor could be obtained by Cole-Cole plot and was influeneced by the amount of WO$_3$ added.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.136-141
• /
• 2016

A phase-locked loop(PLL) with effectively increased capacitance by current modulator has been proposed. In this paper, the effective capacitance of loop filter is increased by using current modulator and it results in 1/10 reduction of capacitance in loop filter. It has been designed with a 1.8V $0.18{\mu}m$ CMOS process. The simulation results show that the proposed PLL has the same phase noise characteristic and locking time of conventional PLL.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.68-72
• /
• 2010

The coupling between the transverse and longitudinal components of the channel electron motion in NMOS devices leads to a reduction in the barrier height. Therefore, this study theoretically investigates the effects of the in-plane velocity of channel electrons on the capacitance-voltage characteristics of nano NMOS devices under inversion bias. Numerical calculation via a self-consistent solution to the coupled Schrodinger equation and Poisson equation is used in the investigation. The results demonstrate that such a coupling largely affects capacitance-voltage characteristic when the in-plane velocity of channel electrons is high. The ballistic transport ensures a high in-plane momentum. It suggests that such a coupling should be considered in the quantum capacitance-voltage modeling in ballistic transport devices.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.698-701
• /
• 2016

A phase-locked loop(PLL) with effectively increased capacitance by current modulator has been proposed. In this paper, the effective capacitance of loop filter is increased by using current modulator and it results in 1/10 reduction of capacitance in loop filter. It has been designed with a 1.8V $0.18{\mu}m$ CMOS process. The simulation results show that the proposed PLL has the same phase noise characteristic and locking time of conventional PLL.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.4
• /
• pp.475-483
• /
• 1999

A lab-scale test was carried out to study the reduction of electrical energy consumption in the pulsed corona discharge process for nitrogen oxides removal. The experiment was mainly focused on 1) the activation of pollution removal reactions by chemical additives and 2) the optimization of electrical circuit for the efficient energy transfer from the power supply to the corona reactor. Hydrocarbon chemical additives used in the experiment are thought to be responsible for the enhancement of the NO conversion through the chain reactions of free radicals such as, R, RCO, and RO. Electrical energy consumption per converted NO molecule has a minimum value of 17 eV when pentanol is injected. When ethylene and propylene are injected, 30 eV and 22 eV of electrical energy consumption is required for the conversion of NO molecule respectively. The ratio of the pulse forming capacitance$(C_e)$ to the reactor capacitance$(C_R)$ plays an important role in the energy transfer efficiency to the reactor. Maximum energy transfer efficiency of approximately 72% could be obtained by using the pulse forming capacitance which is 3.4 times larger than the reactor capacitance, and also the maximum NO conversion efficiency was observed with the same condition.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.8
• /
• pp.389-395
• /
• 2006

In the single-phase switched reluctance motor (SRM) drive, the required DC source is generally supplied by the circuit consisting of bridge rectifier with diodes and many filter capacitances connected with AC source. Although the peak torque ripple of SRM is small because of large capacity of the capacitance, the charge and discharge time swhich the AC source acts on the capacitance are small and the peak current will pass on the side of source, so power factor and system efficiency decrease. Therefore a novel SRM drive system is presented in this paper, which includes drive circuit realizing reduction of torque ripple and improvement of power factor and switching topology. The proposed drive circuit consists of one switching part and diodes which can separate the output of AC/DC rectifier from the large capacitance and supply power to SRM alternately in order to realize reduction of torque ripple and improvement of power factor through the turn on and turn off of switching part. In addition, the validity of method is tested by simulation and experiment.