• 제목/요약/키워드: Casting Skin

검색결과 28건 처리시간 0.034초

Visualizing the Peripheral Primo Vascular System in Mice Skin by Using the Polymer Mercox

  • Stefanov, Miroslav;Kim, Jungdae
    • 대한약침학회지
    • /
    • 제18권3호
    • /
    • pp.75-79
    • /
    • 2015
  • Objectives: As the peripheral part of the primo vascular system (PVS) is difficult to visualize, we used a vascular casting material Mercox injected directly into the skin to take advantage of a simple procedure to visualize PVS structures as primo vessels (PVs) and primo nodes (PNs) in the skin. Methods: Two colors of the polymer Mercox were injected into mouse skin. After a partial maceration of the whole body with potassium hydroperoxide solution, we anatomized it under a stereomicroscope to trace the Mercox that had been injected into the PVS. Results: Injection of Mercox directly into the skin allowed the PVs and the PNs to be visualized. This approach can fill the PVS when the material is ejected out of the PVs or PNs. The shapes, sizes, and topographic positions of the nodes and the vessels are the hallmarks used to identify the PVS in skin when Mercox is used as a tracer. Conclusion: The direct injection of the casting material Mercox into skin, with modified partial maceration procedures, is a promising method for visualizing the PVs and the PNs in the peripheral part of the PVS in skin. The polymer Mercox can penetrate through the primo pores of the primo vascular wall and fill the PVs and the PNs. The data prove that PVs and PNs exist on the hypodermal layer of the skin.

상전환 공정에 의한 폴리설폰막의 제조에 있어 제막용액에 첨가된 톨루엔의 영향 (Effect of Toluene Added to Casting Solution on Characteristic of Phase Inversion Polysulfone Membrane)

  • 최승락;박소진;서범경;이근우;한명진
    • 공업화학
    • /
    • 제19권6호
    • /
    • pp.633-639
    • /
    • 2008
  • 상전환법을 이용하여 폴리설폰, n-메틸피롤리돈과 톨루엔으로 이루어진 제막용액으로부터 고분자 분리막이 제조되었다. 톨루엔은 폴리설폰에 대한 비용매로서 제막용액에 첨가되었으며, 침지용 비용매로는 이소프로필알코올이 사용되었다. 제조된 모든 분리막은 밀집 형상의 표면층과 스폰지 형상의 하부층으로 구성된 이중구조 형태의 비대칭성 구조를 보였다. 첨가된 톨루엔은 제막용액의 열역학적 성질을 변화시켜 열역학적 상분리를 촉진하는 역할을 할 수 있음을 보였으며, 제조된 분리막은 톨루엔을 첨가에 의해 막의 표면층 두께가 증가하는 특성을 보였다. 분리막의 투과 특성을 측정한 결과, 톨루엔이 첨가되었을 때 밀집 표면층의 두께 증가에도 불구하고 거의 동일한 배제율을 유지하면서 투과플럭스는 5배 이상 증대하는 효과를 보였다.

항에이즈 약물의 경피흡수에 미치는 합성고분자 멤브레인의 영향 (The Effect of Synthetic Polymer Membranes on the Skin Permeation of Anti-AIDS Drugs)

  • 이경진;김대덕
    • Journal of Pharmaceutical Investigation
    • /
    • 제28권1호
    • /
    • pp.1-5
    • /
    • 1998
  • The effect of synthetic polymer membranes on the permeation rate of dideoxynucleoside-type anti-HIV drugs through hairless rat skin was studied using ethylene/vinyl acetate copolymer (EVA) and ethylene/methyl acrylate copolymer (EMA) membranes fabricated by solvent casting method. In vitro skin permeation kinetics study of DDC (2',3'-dideoxythymidine), DDI (2',3'-dideoxyinosine) and AZT (3'-azido-3'-deoxythymidine) across the (membrane/skin) composite was conducted for 24 hours at $37^{\circ}C$ using the Valia-Chien skin permeation system. The results showed that skin permeation rate of each drug across the (skin/membrane) composite was mainly dependent on the property of the membrane. Proper selection of the polymeric membrane which resembles hydrophilicity/lipophilicity of the delivering drug was important in controlling the skin permeation rate.

  • PDF

Metallurgical Failure Analysis on a Suspension Clamp in 154kV Electric Power Transmission Tower

  • 이재홍;정남근
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제7권2호
    • /
    • pp.237-240
    • /
    • 2021
  • Failure of a suspension clamp made of hot dip galvanized cast iron in 154kV transmission tower was investigated. Metallurgical analysis of a crack of the clamp was performed using a digital microscope, an optical microscope, and a scanning electron microscope. It was revealed that the crack surface was covered by continuous zinc layer. Distinctive casting skin was found underneath both the outer surface and crack surface. The result showed that pre-existing crack had been formed in the fabrication, and liquid metal embrittlement during hot dip galvanization may assist crack propagation.

수처리용 정밀여과 멤브레인의 제조 및 특성 연구 (Preparation and Characterization of Microfiltration Membranes for Water Treatment)

  • 정보람;김노원
    • 멤브레인
    • /
    • 제24권1호
    • /
    • pp.50-62
    • /
    • 2014
  • 상 전이 공정을 이용하여 polysulfone계 비대칭 정밀 여과막을 제조하였다. Polysulfone/N-methyl-2-pyrrolidone/polyvinylpyrrolidone/phosphoric acid계로 이루어진 casting 용액을 사용하였으며 응고조로는 물을 사용하였다. 멤브레인 제조공정에 적용된 상 전이 공정으로 증기 유도 상 전이 공정을 적용하였으며 상대습도 74%에서 캐스팅 판의 온도와 노출 시간을 조절한 결과 기공의 크기와 구조에 있어 변화를 관찰할 수 있었다. 제조된 멤브레인의 구조는 SEM과 microflow permporometer를 사용하여 조사하였다. Phosphoric acid의 첨가는 조밀한 스펀지 형태의 멤브레인을 느슨한 스펀지 형태의 멤브레인으로 변화시켰으며 촉매량의 Phosphoric acid 첨가로도 평균 기공크기는 거의 $0.2{\mu}m$ 정도 커지고 유량도 약 3,000 LMH가 증가하였다. 캐스팅 판의 온도와 노출 시간의 변화는 표면층의 구조, 기공의 크기 및 공극률에 큰 변화를 가져옴을 확인할 수 있었다.

Preparation of Cross-linked Asymmetric Membrane and Control of Its Morphology and Mechanical Property

  • Hong, Byung-Pyo;Ko, Moon-Young;Kwon, Byeong-Min;Byun, Hong-Sik
    • Korean Membrane Journal
    • /
    • 제10권1호
    • /
    • pp.1-7
    • /
    • 2008
  • Polystyrene-co-divinylbenzene (PS-co-DVB) asymmetric membranes were prepared. In order to control their structure and mechanical properties the degree of cross-linking and the composition of casting solution were varied. The rubber added PS-DVB membranes was also prepared to overcome the mechanical limitation of cross-linked membrane, and their mechanical properties were investigated. It was revealed that the concentration of polymer in the casting solution affected the determination of skin formation. When the PS-co-DVB membrane consists of styrene-butadiene (SB) rubber or liquid polybutadiene (PBD), the structures formed showed that the PS content in the PS/DVB system played an important role in determining the porous sublayer structure.

전압원이 인가된 도체 내에서의 와전류 분포 해석 (Calculation of Eddy Current Distribution in Conducting Bulk with Voltage Source)

  • 김도완;정현교;한송엽
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제49권1호
    • /
    • pp.9-14
    • /
    • 2000
  • When current flows through a thick conductor such, most of the current flows along outside of the conductor, which is called skin effect. This paper represents a method calculating such a current distribution in the conductor region. The conductor region is divided into some pieces and each piece has its own unknown variable, i.e. current density. The governing equation which expresses Maxwell's equation is combined with the circuit equation with voltage source. The combined equation is solved to obtain current distribution in the conductor. This algorithm is applied to EMC(Electromagnetic Casting) to calculate current density with voltage source.

  • PDF

나프록센 함유 방출제어형 패취의 제제설계 및 평가 (Formulation and Evaluation of Controlled Release Patch Containing Naproxen)

  • 이계주;홍석천;황성주
    • Journal of Pharmaceutical Investigation
    • /
    • 제29권4호
    • /
    • pp.343-348
    • /
    • 1999
  • The purpose of this study is to prepare the controlled release adhesive patch containing naproxen. Pressuresensitive adhesive (PSA)-type patch was fabricated by casting of polyisobutylene (PIE.) and mineral oil in toluene. Membrane-controlled release (MCR)-type patch was prepared by the attachment of the controlled release membrane on the PSAtype patch. The membrane was mainly composed of Eudragit, polyethylene glycol(PEG) and glycerin. The drug release profile and skin permeation test with various patches were evaluated in vitro. The release of naproxen from PIE-based PSAtype patch with various loading doses fitted Higuchi's diffusion equation. However, the permeation of naproxen through hairless mouse skin from PSA-type patch followed zero-order kinetics. In MCR-type patch, thickness of controlled release membrane affected on the drug release rate highly. In the composition of membrane, the release rate was decreased as the ratio of Eudragit increased. The drug release from the MCR-type patch followed zero order kinetics. The permeation of naproxen through hairless mouse skin from MCR-type patch showed lag time for the intial release period and didn't fit the zero-order kinetics

  • PDF

폴리설폰 상전환막의 제조에 있어 프로피오닉산 첨가제의 영향 (Effect of Propionic Acid Additive on Preparation of Phase Inversion Polysulfone Membrane)

  • 한명진;최승락;박소진;서범경;이근우;남석태
    • 멤브레인
    • /
    • 제18권4호
    • /
    • pp.317-324
    • /
    • 2008
  • 상전환법을 이용하여 폴리설폰 고분자막을 제조하고 막의 형상과 투과특성을 측정하였다. 폴리설폰, n-메틸피롤리돈과 프로피오닉산으로 이루어진 제막용액에서 프로피오닉산은 폴리설폰에 대한 비용매로서 제막용액에 첨가되었으며, 침지용 비용매로는 이소프로필알코올이 사용되었다. 첨가된 프로피오닉산은 제막용액의 열역학적 성질을 변화시켜 열역학적 상분리를 촉진하는 역할을 할 수 있음을 보였으며, 제막용액의 점도는 프로피오닉산의 양에 따라 증가하여 프로피오닉산의 첨가에 따라 유동성이 감소하는 특성을 보였다. 제조된 모든 분리막은 프로피오닉산의 첨가에 따라 뚜렷하게 구분되는 형상을 보였다. 프로피오닉산 없이 제조된 막의 밀집화된 표면층은 프로피오닉산이 10wt% 첨가되었을 때 거의 사라졌으며, 30 wt% 첨가되었을 때 분리막은 알갱이 형태의 표면층으로부터 스폰지 형태의 하부층으로 형상의 차이가 구배를 보이며 나타났다. 물 투과도는 비용매 프로피오닉산의 증가와 함께 증대하였으며 폴리에틸렌글리콜을 사용한 배제율의 경우 프로피오닉산의 증가와 함께 감소하는 것으로 나타났다.

피부 - 분석심리학적 조명 - (A Study on Skin - From the Perspective of Analytical Psychology -)

  • 박영선
    • 심성연구
    • /
    • 제29권2호
    • /
    • pp.127-156
    • /
    • 2014
  • 피부는 우리 몸의 맨 바깥을 둘러싸고 있어 신체를 보호하며 생리적으로 중요한 기능들을 수행하는 인체 기관의 하나이다. 그러나 생리적 기능을 넘어서 사회문화적 차원을 포함하는 인간 정신의 다채로운 내용들이 그 위에서 풍부하게 표현되는 공간이 되기도 한다. 본 논문은 분석심리학의 관점을 바탕으로 피부가 가지는 다양한 상징적 의미들을 탐구해보고자 한다. 피부는 표피, 진피, 피하지방층으로 구성되며 방어막으로서의 기능 뿐 아니라 체온 조절, 비타민 D합성, 감각 기능 등 생명 유지에 필요한 여러 역할들을 담당한다. 최근 의학계에서는 심리적 요인과 생리적 변화 사이의 상호 관련성을 과학적으로 규명하려 노력하고 있어 향후 피부에서 나타나는 현상들과 정서적 관련성에 관해 좀 더 체계적인 이해가 가능해 질 것으로 기대되고 있는데 일찍이 융은 정신양 기능에 대한 가설이나 동시성 이론을 통해 물질과 정신 사이의 연관성을 직관적으로 시사한 바 있다. 논문에서는 일상의 언어에 나타나는 피부 관련 표현들을 통해 피부의 사회심리학적 측면을 살펴본다. 언어는 한 집단의 정신세계를 담지하는 전달자일수 있기 때문이다. 또한 피부는 겉으로 드러나기 때문에 증상이 있을 때 특별한 사회적, 심리적 반응을 유도하고 환자에게 큰 고통이 될 수 있다. 페르조나는 인격의 외피로서 사회와의 관계 속에서 성립되는 역할인데 이는 자주 신체의 외피인 피부를 통해 표현된다. 자아 이미지, 자아 정체성은 피부와 밀접한 관련이 있으며 다양한 모습으로 피부 위에 표출된다. 융은 에로스를 관계 원리로 규정한 바 있는데 피부야말로 에로스가 구체적으로 실현되는 공간이라 할 수 있다. 민담과 신화 속에 나오는 짐승 가죽을 뒤집어쓰거나 허물을 벗는 이야기들에서 개성화 과정에서 변환의 의미를 내포하는 피부의 상징성을 읽을 수 있다. 또한 피부질환이 전체정신의 중심으로부터 의식으로 전해지는 메시지 일 수 있음을 이해할 때 자기실현에 중요한 시사점을 발견할 수 있을 것이다.