• Textile Coloration and Finishing
• /
• v.5 no.3
• /
• pp.221-228
• /
• 1993

Cellulose acetate and methyl cellulose were synthesized from waste cellulose in order to make waste knit on value added highly. Crystal waste cellulose by oxidation using $HIO_4$ and then acetylation was decrystallized. A degee of crystallinity was measured by X-ray diffraction and the structure was identified by FT-IR spetroscopy, respectively. Cellulose acetate was prepared from the reaction of decrystallized cellulose with acetic acid, cone-$H_{2}SO_{4}$ and acetic anhydride. Also, structure identification by FT-IR and a degree of crystallinity by X-ray diffraction were performed. DS of the synthesized cellulose acetate was 2.8 and viscosity average molecular weight was 238,000. Also, methyl cellulose was synthesized by treating cellulose acetate with NaOH and iodomethane. DS of the synthesized methyl cellulose was 3.0. Glucose unit with three hydroxy groups was all substituted by methoxyl groups. It was identified by FT-IR spectroscopy. Also, the thermal properties of the synthesized methyl cellulose were examined by DSC. It shewed two shewed melting peaks at 22$0^{\circ}C$ and 24$0^{\circ}C$ in the 2nd scan. It proved that DS=3.0 of methyl cellulose was a thermotropic liquid crystal.

• Korean Journal of Materials Research
• /
• v.28 no.4
• /
• pp.227-234
• /
• 2018

We investigate the effect of the modification of cellulose acetate propionate as an organic vehicle for silver paste on solar cell efficiency. For the modification of cellulose acetate propionate, poly(ethylene glycol) is introduced to the hydroxyl groups of a cellulose acetate propionate backbone via esterification reaction. The chemical structure and composition of poly(ethylene glycol) functionalized cellulose acetate propionate is characterized by Attenuated total reflectance Fourier transform infrared, $^1H$ nuclear magnetic resonance, differential scanning calorimetry and thermogravimetric analysis. Due to the effect of structural change for poly(ethylene glycol) functionalized cellulose acetate propionate on the viscosity of silver paste, the solar cell efficiency increases from 18.524 % to 18.652 %. In addition, when ethylene carbonate, which has a structure similar to poly(ethylene glycol), is introduced to cellulose acetate propionate via ring opening polymerization, we find that the efficiency of the solar cell increases from 18.524 % to 18.622 %.

• The Korean Journal of Zoology
• /
• v.15 no.3
• /
• pp.101-104
• /
• 1972

A simple and economical method for separation of lactate and malate dehydrogenase isozymes is described in detail. The method is based on cellulose acetate strip electrophoretic separation of the isozymes, tetrazolium reduction to purple formazan. Resolution is as good as in the experiment using expensive equipments.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.8-18
• /
• 1994

In one bath dyeing system of silk/cellulose acetate fiber blend fabric with acid /disperse dyes, adsorption behavior of acid dyes and disperse dyes on silk and cellulose acetate fabrics were examined. In the dyeing of cellulose acetate with C. I. Disperse Red 19(Red 19) and C. I. Disperse Red 60(Red 60) at 8$0^{\circ}C$ and 10$0^{\circ}C$, dye uptake with Red 19 was higher than that with Red 60. When the silk/cellulose acetate dyed with Red 19 and Red 60 at 10$0^{\circ}C$, dye uptake on cellulose acetate was influenced by affinity of the dye to the silk fabric dyed together. When the silk/cellulose acetate dyed with Blue 80/Red 19 and Blue 80/Red 60 at 10$0^{\circ}C$, color of cellulose acetate dyed with Red 19 and Red 60 was not influenced by Blue 80 but silk dyed with Blue 80 was influenced by Red 19 and Red 60. Interrelation of K/S value and Munsell value was scarcely any but showed the change tendency of K/S value.

• Journal of Korea Foresty Energy
• /
• v.17 no.1
• /
• pp.30-35
• /
• 1998

The cellulose modification can be made in steps, giving a range of new products having properties quite different from the parent cellulose. Effective molecular weight control and narrow molecular weight distribution of the polyacrylonitrile can be accomplished by anionic polymerization technique. Preformed polyacrylonitrile was grafted precisely onto cellulose acetate by SN$_2$ reaction mechanism in a simple and effective way under homogeneous reaction condition. The 3.5g of completely dried cellulose acetate(DS=2.4) dissolved in 50ml of dry THF was transferred to the 215m1 polyacrylonitrile solution. The mixture was stirred vigorously under nitrogen atmosphere for 2 hrs. FTIR spectra of cellulose acetate and grafted cellulose acetate were taken, and their characteristic bands were identified.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.2
• /
• pp.157-163
• /
• 2000

Filter hardness is important to filter and cigarette manufactures because it is directly related to the ability of a plugmaker during making filter and to the acceptability of the filter by the consumer. In general, glycerol triacetate(Triacetin, TA) is the currently used common plasticizer in making filters from cellulose acetate tow and the effect of triacetin on hardness of filter which is made of mono cellulose acetate tow was well known. But unfortunately, the effect of triacetin on the hardness of cellulose acetate filter containing ativated carbon(carbon filter) was not reported so far. In this study, we manufactured filters with various carbon content at different triacetin concentrations and then analyzed the filter hardness and pressure drop. Filter hardness was directly increased with triacetin concentration but pressure drop was not affected and the effect of carbon content on filter hardness was smaller than that of triacetin concentration. However, pressure drop was directly increased with carbon content.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.16 no.1
• /
• pp.19-25
• /
• 2010

It is becoming increasingly important to utilize alternative raw materials for plastic industries other than petrochemical-based plastics. Cellulose derivatives were the bases of the original synthetic plastics. Cellulose and its derivatives, especially the widely used cellulose acetate (CA), constitute one of the main classes of raw materials for production on artificial fibers, films, plastics etc. CA is one of the well known polymers produced from naturally available plant substance. Many researches have focused on the isolation of cellulose from the plant cells to use them as cellulose derivatives and composite materials. Chemical and mechanical treatments provide changes on the molecular structures influencing the fundamental properties of these naturally abundant polymer. The aim of this review article is to review biodegradation, synthesis, formation, and utilization of cellulose esters, especially di-acetate, used in packaging related researches.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.9-12
• /
• 2005

Molecular characteristics and rheological properties of cellulose acetate butyrate (CAB), cellulose acetate propionate (CAP) and nitrocellulose (GC-519) which are being widely used as propellants were investigated. Their weight-average molecular weight (Mw) and number-average molecular weight (Mn) were estimated via Gel Permeartion Chromatograpy (GPC). Cellulose derivatices were mixed with di-n-propyl adipate (DNPA) which acted as plasticizer in acetone, and then rheological properties of the mixture of cellulose derivatives and this plasticizer in acetone were investigated at $0^{\circ}C$ by rheometer.

• Macromolecular Research
• /
• v.15 no.6
• /
• pp.565-574
• /
• 2007

In this study, five representative, commercially available polymers, Ultem 1000 polyetherimide, Kapton polyimide, phenolic resin, polyacrylonitrile and cellulose acetate, were used to prepare pyrolyzed polymer membranes coated on a porous {\alpha}-alumina$ tube via inert pyrolysis for gas separation. Pyrolysis conditions (i.e., final temperature and thermal dwell time) of each polymer were determined using a thermogravimetric method coupled with real-time mass spectroscopy. The surface area and pore size distribution of the pyrolyzed materials derived from the polymers were estimated from the nitrogen adsorption/desorption isotherms. Pyrolyzed membranes from polymer precursors exhibited type I sorption behavior except cellulose acetate (type IV). The gas permeation of the carbon/{\alpha}-alumina$ tubular membranes was characterized using four gases: helium, carbon dioxide, oxygen and nitrogen. The polyetherimide, polyimide, and phenolic resin pyrolyzed polymer membranes showed typical molecular sieving gas permeation behavior, while membranes from polyacrylonitrile and cellulose acetate exhibited intermediate behavior between Knudsen diffusion and molecular sieving. Pyrolyzed membranes with molecular sieving behavior (e.g., polyetherimide, polyimide, and phenolic resin) had a $CO_2/N_2$ selectivity of greater than 15; however, the membranes from polyacrylonitrile and cellulose acetate with intermediate gas transport behavior had a selectivity slightly greater than unity due to their large pore size.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.241-252
• /
• 2016

Cellulose acetate is one of well-known industrial materials which have various commercial uses. We treated the lignocellulosic biomass using two-step (steam explosion-chemical) reaction followed by acetylation to get the cellulose acetate in this study. The two-step treatment was done to improve the yields of acetylation of the substrates. The yields of the cellulose acetate were about 88.4, 88.1, and 151.7% in barley straw, rice straw, and oak tree, respectively. Also the degree of substitution (DS) of the acetates was 2.1 to 2.5 in the biomass. We found that the biomass were valuable cellulosic sources, including their derivatives, in this study. This means that the biomass can be converted into the high-valued cellulosic stuff.