• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.153-160
• /
• 2006

In this study, the change of getechnical properties of sand due to cementation was investigated by undrained triaxial test of isotropicallv consolidated sample. For inducing the cementation, $5\sim20%$(sand weight) gypsum were included in the sand and cured in the mold under the overburden pressure 55kPa. The yielding strength and stiffness of cemented sand were increased and also the aspects of effective pore water pressure were changed as the degree of cementation and the relative density. Generally the degree of cementation exerted more influence on the behavior of cemented sand than the relative density.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.405-411
• /
• 2012

Recovery of copper powder from copper chloride solution used in $MoO_3$ leaching process was carried out using a cementation method. Cementation is a simple and economical process, necessitating less energy compared with other recovery methods. Cementation utilizes significant difference in standard reduction potential between copper and iron under standard condition. In the present research, Cementation process variables of temperature, time, and added amount of iron scraps were optimized by using design of experiment method and individual effects on yield and efficiency of copper powder recovery were investigated using bench-scale cementation reaction system. Copper powders thus obtained from cementation process were further characterized using various analytical tools such as XRF, SEM-EDS and laser diffraction and scattering methods. Cementation process necessitated further purification of recovered copper powders and centrifugal separation method was employed, which successfully yielded copper powders of more than 99.65% purity and average $1{\mu}m$ in size.

• 한국지반공학회논문집
• /
• 제22권4호
• /
• pp.85-94
• /
• 2006

본 논문에서는 고결(Cementation)에 의한 모래의 비배수 거동변화를 파악하기 위하여 석고를 고결유발제로 사용한 시료를 조성한 후 등방삼축시험(CIU)을 실시하였으며, 상대밀도 및 고결정도에 따른 거동 양상을 분석하였다. 연구결과 모래의 고결은 항복강도$(q_y)$, 항복시 할선탄성계수$(E_y)$, 첨두마찰각$(\Phi_p)$의 상당한 증가를 유발시키고, 상대밀도보다 모래의 거동에 더 큰 영향을 끼치는 것으로 확인되었다. 그러나 고결결합이 파괴된 이후, 모래의 거동은 고결보다는 상대밀도의 영향을 더 크게 받는 것으로 나타났다. 또한 고결결합에 의한 압축성 감소는 간극수압 발생율을 감소시켜 고결모래의 유효응력 경로가 미고결 모래의 전응력 경로쪽으로 편향되어 발생하였다. 고결결합이 파괴되기 전에는 다일레이션 경향이 감소하지만, 결합이 파괴된 후에는 미고결 모래보다 더 큰 다일레이션 경향이 유발되었다.

• 대한치과보철학회지
• /
• 제38권6호
• /
• pp.765-781
• /
• 2000

The purpose of this study was to compare the screw loosening characteristics of three avail-able cementation type abutments: one-piece cementation type abutment; two-piece cementation type abutment using titanium abutment screw; two-piece cementation type abutment using gold abutment screw. Two implant supported three-unit superstructures were fabricated using a pair of 3 kinds of abutments for each experimental model. Cyclic loading was applied on the specimen, and made to stop when the superstructure showed movement over threshold range. The loaded cycle was counted until the machine stopped. Frequency analysis was done to measure the change of natural frequency before and after the application of cyclic load and to find the effect of screw loosening on the change of natural frequency. The specimen assembly was modeled to perform the finite element analysis to see the distribution of the stress induced by the application of preload over the screw joint and to compare the pattern of the distribution of stress induced by the external force with the change of the preload condition. The following results were obtained: 1. The failure loading cycle of two-piece cementation type abutment using gold screw was significantly greater than those of the other groups. 2. One-piece cementation type abutment applied to multi-unit restoration case did not show greater resistance to screw loosening compared to two-piece cementation type abutments. 3. Frequency analysis showed decrease in natural frequency when screw loosening occured.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.379-391
• /
• 2010

In order to understand the mechanism of cementation of soft soils treated with bacteria, three types of specimens(untreated, normal bacteria concentration treated, and high bacteria concentration treated) were made. Scanning Electron Microscope(SEM), EDX and X-ray diffraction(XRD) analyses were performed on the soft silt and loose sand specimens. Compared with the untreated specimen, a clearer cementation between particles was observed in the high bacteria concentration treated specimen. Based on the scanning electron microscope(SEM) EDX analyses, more calcium carbonate was observed in the specimen treated with high bacteria concentration than other specimens. On the basis of the preliminary results, it appears that microbial cementation can occur in the soft soil. Further study on the cementation of soils using bacteria is necessary to validate this result.

• 대한토목학회논문집
• /
• 제26권3C호
• /
• pp.181-190
• /
• 2006

본 연구에서는 석고함유율을 달리한 고결된 모래 시료를 조성하여 고결정도 및 상대밀도에 따른 고결모래의 거동양상을 분석하였다. 상대밀도 25, 40, 60%의 모래에 모래중량비 5~20%의 석고를 혼합하여 교반시킨 후 상재하중 55kPa 상태에서 양생하여 시료를 조성하였다. 조성된 고결시료는 일정한 구속압(200kPa)상태에서 비배수 전단시험(CIU)이 실시되었다. 실험 결과 고결정도의 증가에 따른 고결된 모래의 항복강도 및 강성의 증가양상을 확인하였고, 고결 결합이 파괴되기 전에는 다일레이션 경향이 억제되지만, 결합이 파괴된 직후 다일레이션 경향이 오히려 증가하는 것으로 나타났다. 또한 고결정도 및 상대밀도에 따라 간극수압 발생경향이 변하였으며, 고결에 의해 상전이선 및 파괴포락선에서의 유효응력비가 변하는 것을 유효응력경로 분석을 통하여 확인하였다. 일반적으로 상대밀도에 비해 고결정도가 고결된 모래의 거동에 더 큰 영향을 끼치는 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제23권5호
• /
• pp.143-151
• /
• 2007

고결모래의 거동은 고결정도, 상대밀도, 응력조건, 그리고 입자특성 등에 의해 영향을 받으며, 특히 고결모래의 강도에 영향을 끼치는 고결결합은 응력에 의해 파괴되기 때문에 고결모래의 강도정수는 응력조건을 고려하여 평가되어야 한다. 일반적으로 고결모래의 마찰각은 고결결합에 의해 영향을 받지 않기 때문에 미고결 상태의 마찰각과 동일한 반면, 점착력은 고결결합에 의해 증가하는 것으로 알려지고 있다. 따라서 본 연구에서는 석고를 고결유발제로 하는 고결시료를 조성하여 다양한 구속압 조건에서 배수전단시험을 실시함으로써, 구속압 변화에 따른 고결모래의 강도정수를 평가하였다. 실험결과 고결모래의 점착력은 고결정도와 구속압의 크기에 따라 고결지배구간, 천이구간, 응력지배구간에서 다르게 평가되었다. 또한 본 연구에서는 고결결합을 파괴시키지 않고 강도정수를 평가하기 위한 적정 구속압을 결정하기 위해 고결정도를 표현하는 일축압축강도와 고결결합을 파괴시키지 않는 최대 구속압의 관계를 결정하였다.

• International Journal of Railway
• /
• 제6권3호
• /
• pp.90-94
• /
• 2013

Cement or lime is generally used to improve the strength of soil. However, bacteria were utilized to produce cementation of loose soils in this study. The microo rganism called Bacillus, and $CaCl_2$ was introduced into loose sand and soft silt and $CaCO_3$ in the voids of soil particles were produced, leading to cementation of soil particles. In this study, loose sand and soft silt typically encountered in Korea were bio-treated with 3 types of bacteria concentration. The cementation (or calcite precipitation) in the soil particles induced by the high concentration bacteria treatment was investigated at 7 days after curing. Based on the results of Scanning Electron Microscope (SEM) tests and EDX analyses, high concentration bacteria treatment for loose sand was observed to produce noticeable amount of $CaCO_3$, implying a significant cementation of soil particles. It was observed that higher calcium carbonate depositions were observed in poorly graded distribution as compared to well graded distribution. In addition, effectiveness of biogrouting has also been found to be feasible by bio-treatment without any cementing agent.

• Carbon letters
• /
• 제4권1호
• /
• pp.24-30
• /
• 2003

In this study, densified 4D carbon/carbon composites were made from carbon fiber and coal tar pitch through the process of pressure impregnation and carbonization and then followed by carbonization and graphitization. To improve the oxidative resistance of the prepared carbon/carbon composites, the surface of carbon/carbon composites was coated on SiC by the pack cementation method. The SiC coated layer was created by depending on the constitution of pack powder, and reaction time of pack-cementation. The morpology of crystalline and texture of these SiC coated carbon/carbon composites were investigated by XRD, SEM/EDS observation. So the coating mechanism of pack-cementation process was proposed. The oxidative res istance were observed through the air oxidation test, and then the optimal condition of pack cementation was found by them. Besides, the oxidative mechanism of SiC formed was proposed through the observation of SiC coated surface, which was undergone by oxidation test.

• 한국지반공학회논문집
• /
• 제28권6호
• /
• pp.53-61
• /
• 2012

본 연구의 목적은 연약지반에 대한 미생물의 고결화 메커니즘을 확인하기 위함이다. 연약지반에 대한 미생물의 고결화 메커니즘을 확인하기 위해서 6가지 미생물 조건(무처리, 일반농도처리, 고농도처리, 상층액처리, 2X 고농도처리, 25% 시료 고농도처리)으로 실험되어졌다. 전자현미경(SEM, EDX)과 X선 분석 회절기(XRD)를 이용하여 실트질시료와 느슨한 모래시료의 분석을 수행하였으며, 일반농도처리 시료에 비교하여 25% 시료 고농도처리 시료에서 입자와 입자 사이에 탄산칼슘이 더욱 명확히 관찰되어졌다. 이러한 연구결과를 바탕으로 연약지반에 대한 미생물 고결화 반응을 확인할 수 있었다.