• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.6
• /
• pp.115-122
• /
• 2010

The main purpose of centralized monitoring system is to manage factory electrical installation efficiently by on-line data acquisition and supervisory control. The existing centralized system is only able to be managed by operator whenever electrical installation's faults are detected. Therefore, it may be possible for propagating the installation's faults when operator make the unexpected mistakes. To overcome the unexpected mistakes, in this paper, the author presents a centralized monitoring system for factory electrical installation using active database. by using active database production rule, stated system can minimize unexpected mistake and can operate centralized monitoring system efficiently. Test results on the five factory electrical installations show that performance is efficient and robust.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.733-741
• /
• 2014

The integration of photovoltaic (PV) energy sources into DC grid has gained considerable attention because of its enhanced conversion efficiency with reduced number of power conversion stages. During the integration process, a local control unit is normally included with every power conversion stage of the PV source to accomplish the process of maximum power point tracking. A centralized monitoring and supervisory control unit is required for monitoring, power management, and protection of the entire system. Therefore, we propose a field-programmable gate array (FPGA) based centralized control unit that integrates all local controllers with the centralized monitoring unit. The main focus of this study is on the process of integrating many local control units into a single central unit. In this paper, we present design and optimization procedures for the hardware implementation of FPGA architecture. Furthermore, we propose a transient analysis and control design methodology with consideration of the nonlinear characteristics of the PV source. Hardware experiment results verify the efficiency of the central control unit and controller design.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.1
• /
• pp.33-37
• /
• 2006

In this paper, we present a centralized monitoring system for infant incubator using Bluetooth. Conventional monitoring systems for incubators require large space and wire connection, which causes the spatial restrictions. To overcome this disadvantage, centralized monitoring system is proposed for infant incubators using Bluetooth. The implemented system consists mainly of transmission systems and receiver systems. There are temperature sensors, humidity sensors, ECG measurement units and Bluetooth modules in the transmission systems. For temperature, humidity and ECG data, the transmission systems acquire them from the measuring modules in the incubator and transmits the signals using Bluetooth. In the receiver system, users can see the status of the infant by accessing the central monitoring host computer. That is, one can monitor the information on the temperature and the humidity in the incubator and Infant's ECG without dependence to a conventional bulky system. Also, the system manager in the receiver system can maintain centralized monitoring of the situations in all incubators and infant. The developed system will be useful in remote diagnosis of infant incubator In various environments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.261-266
• /
• 2014

The current status of domestic monitoring centers was reviewed and the pattern-based security monitoring system and the centralized security monitoring system, both of which are the characteristics of security monitoring systems, were analyzed together with their advantages and disadvantages. In addition, as for a development plan of domestic security monitoring systems, in order to improve the problems of the existing pattern-based centralized monitoring system, Honeynet and Darknet, which are based on anomalous behavior detection, were analyzed and their application plans were described.

• Journal of Korean Port Research
• /
• v.14 no.1
• /
• pp.37-45
• /
• 2000

Centralized safety stock in a periodic replenishment system which consists of one central warehouse and m regional warehouse can reduce backorders allocating the centralized safety stocks to regional warehouse in a certain instant of each replenishment cycle. If the central warehouse can not monitoring inventories in the regional warehouse, then we have to predetermine the instant of allocation according to demand distribution and this instant must be same for all different replenishment cycle. However, transition of inventory level in each cycle need not to be same, and therefore different instant of the allocation may results reduced shortage compare to the predetermined instant of allocation. In this research, we construct a dynamic model based on the assumption of monitoring inventories in the regional warehouse everyday, and develop an algorithm minimize shortage in each replenishment cycle using dynamic programming approach.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.83-90
• /
• 1999

Centralized safety stock in a periodic replenishment system which consists of one central warehouse and m regional warehouse can reduce backorders allocation the centralized safety stocks to regional warehouse in a certain instant of each replenishment cycle. If the central warehouse can not monitoring inventories in the regional warehouse, then we have to predetermine the instant of allocation according to demand distribution and this instant must be same for all different replenishment cycle. However, transition of inventory level in each cycle need not to be same, and therefore different instant of the allocation may results reduced shortage compare to the predetermined instant of allocation. In this research, we construct a dynamic model based on the assumption of monitoring inventories inventories in the regional warehouse everyday, and develop an algorithm minimize shortage in each replenishment cycle using dynamic programming approach.

• Proceedings of the CALSEC Conference
• /
• 2005.03a
• /
• pp.62-67
• /
• 2005

In traditional approach, enterprise-wide consistent security policy enforcement for applications is very difficult task. Therefore, industry is now moving towards new unified enterprise application security concept that consist of centralized authentication and authorization mechanism. The eXtensible Access Control Markup Language (XACML); an XML-based standard defined by OASIS, is most suitable choice which can support centralized, role based, context aware access control mechanism. It is designed to provide universal standard for writing authorization policies and access control request/response language for managing access to the resources. This paper includes a brief overview on XACML and discusses its benefits, limitations and a data flow process. We propose a new generic access control architecture that supports enterprise wide centralized application level access control mechanism using XACML. The other benefits which can be achieved through this architecture are, reduce adnministration cost and complexity, support of heterogeneous computing platforms, centralized monitoring system, automatic fail over, scalability and availability, open standard based solution and secure communication.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.4
• /
• pp.444-452
• /
• 2003

An integration system with multi-measurement sets can be realized via combined application of a centralized and federated Kalman filter. It is difficult for the centralized Kalman filter to remove a failed sensor in comparison with the federated Kalman filter. All varieties of Kalman filters monitor innovation sequence (residual) for detection and isolation of a failed sensor. The innovation sequence, which is selected as an indicator of real time estimation error plays an important role in adaptive mechanism design. In this study, the centralized Kalman filter with adaptive measurement fusion is introduced by means of innovation sequence. The objectives of adaptive measurement fusion are automatic isolation and recovery of some sensor failures as well as inherent monitoring capability. The proposed adaptive filter is applied to the GPS/SDINS integration system with an additional sensor. Simulation studies attest that the proposed adaptive scheme is effective for isolation and recovery of immediate sensor failures.

• Journal of Information Processing Systems
• /
• v.13 no.3
• /
• pp.476-490
• /
• 2017

In the centralized cloud controlled environment, the decision-making and monitoring play crucial role where in the host controller (HC) manages the resources across hosts in data center (DC). HC does virtual machine (VM) and physical hosts management. The VM management includes VM creation, monitoring, and migration. If HC down, the services hosted by various hosts in DC can't be accessed outside the DC. Decentralized VM management avoids centralized failure by considering one of the hosts from DC as HC that helps in maintaining DC in running state. Each host in DC has many VM's with the threshold limit beyond which it can't provide service. To maintain threshold, the host's in DC does VM migration across various hosts. The data in migration is in the form of plaintext, the intruder can analyze packet movement and can control hosts traffic. The incorporation of security mechanism on hosts in DC helps protecting data in migration. This paper discusses an approach for dynamic HC selection, VM selection and secure VM migration over cloud environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.66.2-66
• /
• 2001

Double-effect absorption chiller-heaters have been widely installed in large buildings and are also becoming popular in mid-sized commercial buildings. While much emphasis is Put on designing energy saving and efficient chiller-heaters, careful attention must also be given to the design of control systems for these devices. Currently, these devices are controlled by their own built-in controllers, such as relay based sequence controller or microprocessor based controller. But, because large buildings require multiple chiller-heaters, a centralized supervision and control system is necessary for the efficient monitoring, control, and operations management of these devices We have developed man-machine interface software that allows the implementation of such a system. This system will support increased reliability, more efficient building management operations, and reduced ...