• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.1
• /
• pp.7-17
• /
• 2010

ITS(Intelligent Transport System) as things are used for Broadcast service using TDMB/TPEG/NAVI rather than personal seamless service. It is attaching weight to Traffic information gathering, Charging, Settlement service. This research is applied to improve DCCP(Datagram Congestion Control Protocol) which has function as protecting data and preserving message boundary. The improving method is like that we solve data trust in UDP because Connection and Transmission overhead in UDP is less than in TCP. We fix the data loss which is generated from unordered delivery section of IP base wireless service by using DCCP protocol. We guarantee of connection with OBE(On-Board Equipment) and reliance about transmission of data by complement to mapping table and multi-hoping. Finally, We evaluate the performance about transmission of IP based data. We constructed a test-bed near research center for this test.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.2
• /
• pp.94-101
• /
• 1997

This paper proposes the equalizing charger of series connected batteries which are controlled by the time-sharing method. One-chip microprocessor dectcts the terminal voltage of each battery and then determines the charging time inversely proportional to the terminal voltage so that it decrease the un¬balanced capacity. This system is compact and light, therefore it can be applied to portable equipment such as charger for electric vehicle. And it's so effective as to prevent from overcharging which causes their life to shorten.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.72-74
• /
• 2004

본 연구의 목적은 천안시 소재 (주)삼우금형의 생산 제품인 휴대폰 충전기에 대해 CAE 프로그램인 Moldflow와 CAPA를 이용하여 유동해석과 냉각해석을 수행함으로써 성형불량을 최소화하고 좋은 설계를 얻을 수 있는 최적의 성형조건을 얻으려는 것이다. 사출성형 관련 설계를 설계초기 단계에서 CAE기술을 활용하여 합리적인 설계로 나아가기 위한 구체적인 과정을 기술하였다. 제품 성형에 있어서의 문제점을 최소화하고 재료비 절감, 설계납기 단축, 제품 품질 향상을 달성하기 위해서 CAE 해석을 통하여 현재 제품의 문제점을 도출하고 그 해결책을 제시하였다.

• Journal of Korea Multimedia Society
• /
• v.25 no.6
• /
• pp.833-843
• /
• 2022

Based on the problems of untimely Expressway fire rescue and backward traditional fire rescue methods, an emergency fire fighting and inspection robot riding on expressway guardrail is designed. The overall mechanical structure design of emergency fire fighting and inspection robot riding on expressway guardrail is completed by using three-dimensional design software. The target fire detection is realized by using the target detection algorithm of Yolov5; By selecting a variety of sensors and using the control method of multi algorithm fusion, the basic function of robot on duty early warning is realized, and it has the ability of intelligent fire extinguishing. The BMS battery charging and discharging system is used to detect the real-time power of the robot. The design of the expressway emergency fire fighting and inspection robot provides a new technical means for the development of emergency fire fighting equipment, and improves the reliability and efficiency of expressway emergency fire fighting.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.216-219
• /
• 2021

In the Eco-Friendly Ship Act, the shaft generator is an equipment for eco-friendly ships. However, in order to apply the new technology in ships, high reliability is required, and the HILS (hardware in loop system) test is used as a verification method for this. Therefore, in this paper, a shaft generator is modeled and simulated for HILS test of a tugboat to which a shaft generator is applied. Through simulation, it was verified that the charging/discharging of the shaft generator operates according to the scenario.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.8
• /
• pp.305-310
• /
• 2016

A thermal storage systems was designed to correspond to the temporal or quantitative variation in the thermal energy demand, and most of its heat is stored using the latent and sensible heat of the heat storage material. The heat storage method using latent heat has a very complex phenomenon for heat transfer and thermal behavior because it is accompanied by a phase change in the course of heating/cooling of the heat storage material. Therefore, many studies have been conducted to produce an experimentally accessible as well as numerical approach to confirm the heat transfer and thermal behavior of phase change materials. The purpose of this study was to investigate the problems encountered during the actual heat transfer from an internal storage tank through simulation of the process of storing and utilizing thermal energy from the thermal storage tank containing charged PCM. This study used analysis methods to investigate the heat transfer characteristics of the PCM with simultaneous heating/cooling conditions in the rectangular space simulating the thermal storage tank. A numerical analysis was carried out in a state considering natural convection using the ANSYS FLUENT(R) program. The result indicates that the slope of the liquid-solid interface in the analysis field changed according to the temperature difference between the heating surface and cooling surface.

• Fashion & Textile Research Journal
• /
• v.19 no.2
• /
• pp.221-229
• /
• 2017

This study researched the needs of smart fashion items using energy harvesting for outdoor wearers and surveyed the application areas and design preferences for energy-harvesting systems based on outdoor activities. A total of 217 subjects were surveyed. Subjects who had at least 3 years of experience in outdoor activities were selected in order to increase the reliability of the research results. The survey investigated lifestyles based on outdoor activities, outdoor clothing and electronic equipment usage, purchase style, utilization plan, and design preference for energy-harvesting clothing and supplies. The results showed that 62.7% of the respondents had experience in outdoor activities for more than five years. 96.3% of the subjects carried electronic equipment, and 179 participants(82.5%) experienced discomfort due to battery consumption/dead batteries during outdoor activities. 78.4% were interested in smat fashion items using energy-harvesting technology, and the energy-conversion technology that was useful for outdoor activities was "kinetic energy"(74.7%). Participants showed a high preference for a detachable type(30.9%) and a city type(69.1%) that can be worn in outdoor activities as well as in general life. The preferred location of the electric power-charging device was the "Hem area of top garment"(35.9%), and the reason for this selection was that it was easy to operate and did not interfere with movement. The data from this paper can be used as a basis for product planning and product design for energy-harvesting apparel designers and supply developers for outdoor clothing.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.288-294
• /
• 2018

The entertainment system of the aircraft has changed its paradigm in the form of using passenger electronic devices instead of using a fixed monitor. This has simplified the on-board equipment while the risk of safety has increased with the electric charging of portable electronic devices. Unlike personal portable electronic devices that do not have a transmission function, the use of Wi-Fi enabled electronic devices(T-PED) is allowed and the battery is required to be charged in the cabin. In this study, we used the NASA Aviation Safety Reporting System to investigate the effects of changes in wireless environment and entertainment service. Based on this, we analyzed the risks of personal electronic devices by sharing event occurrence cases caused by in-flight electronic equipment or passenger portable electronic devices(especially smart phones) from the viewpoint of aircraft safety management. This analysis includes identification of potential hazards and risk assessment, and finally the strategies for risk mitigation for safe use of portable electronic devices are suggested.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.4
• /
• pp.23-29
• /
• 2021

The purpose of this study is to reduce the probability of occurrence of electric fires as a preemptive preventive measure, and to strengthen the capability of preventing electric fires by strengthening the cooperative function between electric fire-related departments and establishing a cooperative system. In this study, the general aspects of electric fires were identified by reviewing the literature such as ignition mechanisms of electric fires. And the major electrical fires that occurred in the last 10 years were classified into ignition factors (short circuit, overload/overcurrent, and earth leakage/ground fault) and ignition sources (wiring/wiring appliances, electrical equipment/household appliances). And the 4M technique was used to analyze the potential causes of ignition at the fire site and to suggest preventive measures. In the case In this study, out of 48 electrical fires in the past 10 years, 16 short-circuit fires, 3 overload/overcurrent fires, 3 short-circuit and earth fault fires, 16 fires in wiring/wiring appliances, and 10 fires in electrical equipment/home appliances classified as cases. And prevention measures were presented in terms of human, machine, media, and management by using the 4M technique. For the preemptive prevention of electric fires, strengthening the compulsory electrical safety inspection and making it mandatory to report when new or expanding electric facilities, charging a fee for electric safety inspection for detached houses and granting benefits subject to inspection completion, improvement of the electric safety voluntary inspection table and safety indications; It was suggested as a policy to organize and operate electrical safety inspection personnel in a two-person team (mixed), establish a close work cooperation system with related organizations, and strengthen electrical safety education and publicity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.466-473
• /
• 2013

In this paper, a compact planar multi-loop self-resonant coil of high quality factor with a coaxial cross section is proposed for effective wireless charging. The proposed coil has high Q-factor and a resonant frequency of a coil can be easily controlled by adjusting distributed capacitance. For designing the coil, a self-inductance and a distributed capacitance are calculated theoretically. The self-inductance is calculated from the sum of the mutual energies between small circular loops that are made by dividing the cross section of the coil. To verify its properties and calculation results, the self-resonant coils are fabricated by using a coaxial cable with characteristic impedance of $50{\Omega}$. The measured frequencies are very consistent with the calculated ones. In addition, the resonant frequency can be adjusted slightly by the tuning parameter ${\gamma}$. The resonant coils are applied to a tablet PC, the Q-factors of the Tx and Rx resonant coils are 282 and 135, respectively. As a result of measurement when height between the two resonant coils is 4.4 cm, the power transfer efficiency is more than 80 % within a radius of 5 cm.