• 동력기계공학회지
• /
• 제10권4호
• /
• pp.99-104
• /
• 2006

Young's modulus of composite has been predicted by Eshelby's equivalent inclusion method modified with Mori-Tanaka's mean field theory, where short fibers of aspect ratio distribution are assumed to be aligned. Young's modulus of the composite is predicted with the smallest class interval for simulating the actual distribution of fiber aspect ratio, which is compared with that computed using different class intervals. Young's modulus of the composite predicted with mean aspect ratio or the largest class interval is overestimated by the maximum 10%. As the class interval of short fibers for predicting Young's modulus decreases, the predicted results show good agreements with those obtained using the actual distribution of fiber aspect ratio. It can be finally concluded from the study that if and only if the class interval of short fiber normalized by the maximum aspect ratio is smaller than 0.1, the predicted results are consistent with those obtained using the actual distribution of aspect ratio.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.135-139
• /
• 2017

In recent years, the optical fiber laser has been widely used in industrial fields due to its excellent economical efficiency and its suitability for industrial applications. This usage has increased even further since the KW class Laser was developed. In this paper, structural analysis and heat transfer analysis of a 500W class optical fiber laser end cap module was performed. The stability of end cap housing with the efficient heat dissipation structure of a 500W-class end cap was evaluated. This research determined the optimal design that should be applied to the design and evaluation of future KW class laser output modules.

• 한국터널지하공간학회 논문집
• /
• 제21권3호
• /
• pp.433-452
• /
• 2019

본 연구는 구조용 합성섬유(PP섬유) 혼입량에 따른 숏크리트 보강성능과 적정한 평가방법에 관한 것으로, 강섬유($37.0kg/m^3$)와 구조용 합성섬유(PP섬유) 혼입량을 매개변수($5.0kg/m^3$, $7.0kg/m^3$, $9.0kg/m^3$)로 설정하여 숏크리트 압축강도, 휨강도 및 휨인성 시험을 수행하였다. 특히, 판상의 숏크리트 에너지 흡수능력을 평가하기 위하여 원형 패널 휨인성 시험(Road and Traffic Authority, RTA)을 수행하였다. 검토결과, 압축강도 및 휨강도는 강섬유 보강 숏크리트가 다소크나, 실질적인 숏크리트 보강성능를 나타내는 휨인성은 구조용 합성섬유(PP섬유) 보강 숏크리트가 큰 것으로 분석됨에 따라, 강섬유 보강 숏크리트 대비 동등 이상의 보강효과를 발휘하는 것으로 검토되었다. 또한, 구조용 합성섬유(PP섬유) 혼입량에 따른 휨인성 및 에너지 흡수능력 상관관계에 의하면, 보시편 휨인성 시험(KS F 2566)의 허용기준 3.0 MPa이하조건에서 에너지 흡수능력이 발휘(A등급: 2.55 MPa = 202J, B등급: 2.72 MPa = 282J, C등급: 3.07 MPa = 403J)되는 것으로 검토되었다. 국내 터널현장에서 보수적으로 측정되는 강도개념의 숏크리트 휨인성(>3.0 MPa)을 본 연구의 숏크리트 에너지 흡수능력 상관관계로 지보성능을 평가할 경우, 보다 실질적이고 신뢰도 높은 숏크리트 지보성능 평가가 가능할 것으로 판단된다.

• Korean Journal of Mathematics
• /
• 제23권4호
• /
• pp.733-740
• /
• 2015

In this paper, we prove the existence of warping functions on Riemannian warped product manifolds with some prescribed scalar curvatures according to the fiber manifolds of class (B).

• 대한수학회지
• /
• 제54권2호
• /
• pp.545-561
• /
• 2017

The signature of a surface bundle over a surface is known to be divisible by 4. It is also known that the signature vanishes if the fiber genus ${\leq}2$ or the base genus ${\leq}1$. In this article, we construct new smooth 4-manifolds with signature 4 which are surface bundles over surfaces with small fiber and base genera. From these we derive improved upper bounds for the minimal genus of surfaces representing the second homology classes of a mapping class group.

• 호남수학학술지
• /
• 제36권3호
• /
• pp.597-603
• /
• 2014

In this paper, we prove the existence of warping functions on Riemannian warped product manifolds with fiber manifold of class (B) having some prescribed scalar curvatures.

• 충청수학회지
• /
• 제28권4호
• /
• pp.591-602
• /
• 2015

In this paper, we prove the existence and the nonexistence of warping functions on Riemannian warped product manifolds with some prescribed scalar curvatures according to the fiber manifolds of class (A).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.908-912
• /
• 1996

FRMLs consist of thin sheets of high strength metal, which are laminated using a structural adhesive and high strength fibers. ARALL(Aramid-fiber Reinforced Aluminum alloy Laminates) of FRMLs is a new class of hybrid material. HERALL(Heracron Reinforced Aluminum Laminate) i.e. domestic ARALL is made of homemade aramid fibers, adhesives and adhesive technique. Domestic aramid fiber is Heracron manufactured by KOLON and domestic adhesive is epoxy resin manufactured by Han Kuk Fiber. In this study, Fatigue crack propagation behavior was examined in a 2024-T3 aluminum alloy/aramid-fiber epoxy 3/2 laminated composites, HERALL and ARAL $L^{ⓡ}$-2 LAMINATE comparing with 2024-T3 aluminum alloy. The extrinsic toughening mechanisms in HERALL and ARALL were examined, the crack bridging behavior of fibers was analyzed by new algorithm, which measures crack bridging stress, and the crack bridging zone length was measured.

• 패션비즈니스
• /
• 제13권2호
• /
• pp.78-86
• /
• 2009

When scouring and contraction finishing at $90^{\circ}C$ using Relaxer or Rotary Washer contraction and weight loss ratio in warp and weft directions were excellent. Also surface state of fabric after drying or sanding treatment was excellent without crease. Low melting polyester fabric showed a complete melting bond by heat setting(P/S) at above $160^{\circ}C$. The alkali hydrolysis reaction of polyester showed the breakpoint in the weight loss behavior test, polyester yarn showed a breakpoint ranging from 25% to 28%. This is due to the difference of the hydrolysis rate between regular polyester and soluble polyester. Initially the soluble polyester was eluted and micro-fibrillized 5 times faster than a regular polyester. At a later time, a regular polyester was reduced weight to impart a proper flexibility and drape property to the fabric. As a result of surface sanding finishing, the surface of interior fabric showed a surface state most stabilized when using Mesh No. 220 in mono 0.2d after elution finishing. When the rotation direction of sanding roller was pro-, pro-, pro-, and retro-direction, a directional effect of tuft was not shown, a writing effect as suede was exhibited and a surface state was even. Sublimation fastness was 3-4 class for polyester and 2-4 class for nylon. Light fastness 3-4 class after lapse of 100 hours and 2-4 class after lapse of 160 hours. Abrasion fastness was 3-4 class on wet and 4-5 class on dry Laundry fastness was 2-4 class. As such, the abrasion fastness is slightly reduced upon wetting and the use thereof for interior is excellent, whereas laundry fastness is slightly lowered.

• 광산업정보
• /
• 통권60호
• /
• pp.68-70
• /
• 2010