• KIEAE Journal
• /
• v.16 no.5
• /
• pp.57-64
• /
• 2016

Purpose: Recently, lighting energy consumption in buildings has been gradually increasing and more studies are being carried out in order to solve this problem. Especially, the efficiency of the light-shelf system, which is a natural lighting system, has been recognized as a potential solution in addressing this problem and so various studies regarding the light-shelf system are being conducted. However, if high luminance material is used for the light-shelf system, glaring may occur in certain circumstances even though such material increases efficiency, and there are also difficulties related to maintenance and management in the case of an external light-shelf system. Therefore, the purpose of this study is to suggest modifications in relation to the reflectivity of the light-shelf system and introduce a rolling type light-shelf system with built-in cleaning equipment. In addition, a performance evaluation technique was established to verify its effectiveness. Method: In this study, we reviewed previous studies related to the light-shelf system and its performance. Then a testbed was established to assess the performance of the rolling-type light-shelf system suggested in this study. Also, the performance of the rolling-type light-shelf system suggested in this study was compared and analyzed with that of existent light-shelf systems in order to better verify the performance, and the uniformity ratio of illumination and lighting energy consumption were calculated for this purpose. Result: The results of the performance evaluation are as follows. 1) The performance evaluation result of the light-shelf system on the day of the summer solstice shows that $30^{\circ}$ is appropriate for the angle of light-shelf system, and the depth of the incoming natural light also increases as the angle of the light shelf increases. 2) It is possible to improve the uniformity ratio of illumination by increasing the reflectivity of the light shelf, and the reason for this is the increase in the amount of incoming light entering indoors due to the increased reflectivity of the light shelf. 3) The rolling type light-shelf system suggested in this study enables energy saving in comparison with existent light-shelf systems, and when the external illuminance decreases to 60,000 lx and 40,000 lx during the summer solstice due to factors such as the weather, the suggested light-shelf system can save energy by 12.1% and 5.1% respectively. Thus the light-shelf system proposed in this study is deemed to be effective in reducing energy costs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.485-493
• /
• 2017

Rearing knowledge is a significant factor of relevance for rearing practice, and assessment of rearing knowledge and practice is important for infant parents. The author adopted the Child Rearing Knowledge Scale (CRKS) and Child Rearing Practice Scale (CRPS) that were developed and validated by Saramma & Thomas. According to the international linguistic validation process, pilot testing was done based on 20 infant's mothers in one Oketani massage center and one public health center. Descriptive statistic methods and Wilcoxon Rank Sum Test were employed to evaluate the level and compare the mean score according to general characteristics of subjects of the tools. Reliability and validity were tested by Cronbach's alpha and Spearman Correlations. The mean age of the subjects was 33.94 (${\pm}2.99$) years and the mean age of babies was 3.35 (${\pm}0.58$) months. The understanding level of the Korean version of the CRKS and CRPS was 1.80 (${\pm}0.65$) and 1.33 (${\pm}0.54$), respectively. In addition, the CRKS and CRPS were relatively easy to use. The mean score of the CRKS was 22.50 (${\pm}4.89$), which was a moderate score, while the mean score of the CRPS was 30.75 (${\pm}2.04$), which was high. The Cronbach's alpha values of the CRPS were as follows: feeding, 0.71; growth and development, 0.64; cleaning and protection 0.68; infant stimulation, 0.77. There was a significant correlation between infant stimulation of the CRPS and growth and development of the CRKS (r=0.530, p=0.016). The CRKS score of medical staff was significantly higher than that of non-medical staff (p=0.04). The CRKS and CRPS are expected to be used in clinical or community care practice as easy-to-use tools that are easy to respond to.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.173-179
• /
• 2020

The purpose of this study was to examine whether chicken-rearing activity is effective on the character, emotion and self-esteem of middle school students, as a pilot study for the development of an animal-assisted education program based on chicken-rearing activity. School was selected as the place where students have experience with raising animals before and no poultry farms were located near the school. The experimental group consisted of 11 students as the chicken-rearing group. The conducted activities were greeting chickens, cleaning henhouse, feeding them, and picking eggs up for five months. Character, emotion and self-esteem scales were used as test tools, and pre-testing and post-testing were conducted to verify the effectiveness of the study. Data collected were analyzed by using SPSS Win 25.0 statistical program. As a result, the character, emotional stability and self-esteem of middle school students who participated in chicken-rearing activity were improved. This study is meaningful in that the chicken-rearing activity proved to be effective for the character, emotion and self-esteem of middle school students and prepared an experimental case study for developing an animal-assisted education program based on chicken-rearing activity. It is expected to be useful as basic data of animal-assisted education for adolescents in school.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.218-225
• /
• 2020

This study analyzed the priorities of the cross-compliance items of public-benefit direct payment using an Analytic Hierarchy Process and Fuzzy Decision Making Analysis. The valuation criteria are policy efficiency, farm acceptability, and feasibility, and the valuation targets are the basic and additional cross-compliance items. The survey was performed by targeting 50 experts from each class, and conducted for about a month starting from the beginning of July 2019. The results show that the weight of the valuation criteria is higher in the order of farm acceptability, feasibility, and policy efficiency. Compliance with PLS standards, compliance with disposal standards of waste vinyl and pesticides, soil testing, compliance with toxic substance standards, education, etc. are comparatively evaluated to be higher cross-compliance items in basic cross-compliance. Disposing of an abandoned well, jointly collecting and disposing of agricultural by-products, common area care and cleaning, maintenance of empty houses and poor facilities, growing green manure crops during the fallow period, etc. are comparatively evaluated to be higher cross-compliance items for the additional cross-compliance. The results of this study are expected to contribute to the government's policy related to the cross-compliance of public-benefit direct payment.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.441-450
• /
• 2011

This study investigated potential damages and conservation methods for the ceramics (without glaze) by examination of physical and chemical effects from the burial environments. For this study, pottery samples excavated from Daejeon Hakha, Asan Eumbong, Hwasung Sogeunsan and Kongju Haengbokdosi were examined with released ions and extraction through desalination. The result showed that the ion inflow into the ceramics was dependent upon the porosity and the absorption of ceramics. The high temperature fired ceramics (over $1,000^{\circ}C$) have low porosity and absorption, therefore almost no salt infiltration during the burial period. However, low temperature fired ceramics (under $800^{\circ}C$) have high porosity and absorption, and most of salts were removed during the desalination. The 40 to 60% of salts were removed in two days and 60 to 80% of slats were released in a week. Furthermore, fertilizer residues such as $K_2SO_4$, in soils were detected in the ceramcis. Also the characteristics of buried soil affected ion infiltration into ceramics. Ceramics buried in sandy soil had relatively less ion contents from buried environments than those in clayey soil. Therefore, low temperature fired ceramics could do not only cleaning but also desalination if it is necessary, and the period could be decided to the condition of ceramics.

• Journal of Distribution Science
• /
• v.13 no.5
• /
• pp.83-90
• /
• 2015

Purpose - This research aims to understand the different behaviors of consumers according to cognitive age. Specifically, this research is focused on pro-social behavior. Pro-social behavior is defined as behavior benefiting others, rather than behavior benefiting one's self. It often entails individual risk or cost, such as when giving resources to others, waiting in line, asking for or paying a fair price, or risking one's life in battle. Therefore, we sought to understand consumer psychology and cognitive age as a reflection of inner psychology. People frequently perceive themselves as younger or older than their chronological ages. This self-perceived or cognitive age is a subjective age perception independent of actual chronological age. The discrepancy degree between chronological and cognitive age represents how much individuals perceive themselves as younger than they are. This study examines the gap in donation intention based on cognitive age. In order to investigate cognitive age, composed of four sub-categories (feel-age, look-age, do-age, and interest-age), this study explores the differential donation intention based on cognitive age, which determines the relationship between the young age and old age. Research design, data, and methodology - Data research was conducted by gathering 216 survey samples, excluding those with unreliable answers. Data coding and cleaning were used and SPSS 19.0 software for the data analysis. The respondents were categorized into two types, younger cognitive ages and older cognitive ages. Additionally, we analyzed the moderating variables. In particular, we used cognitive age degree and congruency level (cognitive age low vs. cognitive age high) × (congruency close vs. congruency distant) between - subjects design. First, regression was done to verify the difference between chronological age and cognitive age. Second, a t-test was done to verify the difference of cognitive age level in donations. Third, ANOVA (analysis of variance) was done to verify the difference between cognitive age and congruency in donations. Last, ANOVA was done to verify the difference between cognitive age and moral judgments in donations. Result - The results show most respondents perceive themselves as younger than their chronological ages. In particular, older respondents feel they are younger than their actual age. Moreover, the result of the comparison between low degree and high degree groups of cognitive age, show high donations at the higher degree of cognitive age groups. In addition, the closer the distance to the beneficiaries, the higher the donation in high degree cognitive age groups. The higher moral judgment groups also show relatively high contributions in lower degree cognitive age groups. Conclusions - Donations belong to the category of pro-social behavior reflecting an individual's psychological state. Therefore, it is important in understanding cognitive age. This study implies that it is necessary to take into account both cognitive age and chronological age when segmenting donors. Moreover, this study confirmed that there are different factors affecting the motives behind donations. Thus, it may be utilized to create differential donation strategies.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.4
• /
• pp.246-252
• /
• 2015

In steel factory, hot roller cleaning process produces a lot of iron oxide particles called as mill scale. Major components of these particles are wustite (FeO), magnetite ($Fe_3O_4$), and hematite ($Fe_2O_3$). In this study, we tried to produce pure magnetite from the mill scale because of the largest phosphate adsorption capacity of the magnetite. The mill scale was treated with acid (HCl+$H_2O_2$), base (NaOH), and acid-base ($H_2SO_4$+NaOH). Batch adsorption tests showed the acid and/or base treatment could increase the phosphate adsorption capacity of the iron oxides from 0.28 to over 3.11 mgP/g. Magnetite, which could be obtained by acid and base treatment of the mill scale, showed the best adsorption capacity. From the kinetic analysis, both Freundlich and Langmuir isotherm well described the phosphate adsorption behavior of the magnetite. In Langmuir model, maximum phosphate adsorption capacity was found to be 5.1 mgP/g at $20^{\circ}C$.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1273-1280
• /
• 2008

This study sought to establish the optimum operating condition for the recovery of caustic (NaOH) solution from mercerization in textile process. As main factors, the silt density index (SDI) evaluation of ceramic membrane for the application of nanofiltration/reverse osmosis (NF/RO) membrane, the recovery yield measurement of caustic solution for the application of polymeric membrane, the optimum condition of chemical cleaning for the membrane regeneration, the optimum removal condition of total organic carbon (TOC), turbidity, color, and the permeate flux of ceramic membrane/polymeric membrane combined process were investigated. As results, ceramic ultrafiltration (UF) in the first step and nanofiltration (NF) in the second step were found to be suitable for the removal of total suspended solid (TSS), residual organics, turbidity including color, and the recovery of caustic solution from caustic wastewater stream in mercerization process. When only the ceramic UF membrane was used, the rejection efficiency of both of TSS and turbidity was more than 99.0%, and the color and TOC were rejected about 74.7% and 49.2%, respectively. Meanwhile, the combined membrane precess of UF and NF membranes showed even more efficient removal abilities and thus more than 99.9% of TSS and turbidity, 87.7% of color, and 78.2% of TOC were removed. In particular, 91.3% of NaOH was successfully recovered with 83.7% of total volume in the combined membrane process. With this regard, a clean caustic solution was obtained in a high purity, which can be reused for mercerization process, expecting to offer economical benefits.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.12
• /
• pp.877-882
• /
• 2013

The application of ultrafiltration (UF) and microfiltration (MF) membranes has been increased for drinking water purification. The advantages of UF/MF membrane process compared to conventional treatment processes are stable operation under varying feed water quality, smaller construction area, and automatic operation. Most membrane treatment plants are designed with polymeric membranes. Recently, some studies suggested that the process of treating surface water with ceramic membranes is competitive to the application of polymeric membranes. Higher water flux, less frequent cleaning, and much longer lifetime are the advantages of ceramic membrane comparing to polymeric membrane. Therefore, this research focused on the application of ceramic MF membrane pilot plant at the slow sand filtration plant. The ceramic membrane pilot plant has three trains that used raw water and sand filtered water as a feed water, respectively. For optimizing the pilot plant process, the coagulation with PACl coagulant was used as a pretreatment of ceramic membrane process. In addition, CEB (Chemical Enhanced Backwash) process using $H_2SO_4$ and NaOCl was used for 1.5 days, respectively. The experimental results showed that applying the optimum coagulant dose before membrane filtration showed enhancing membrane fluxes for both raw water and sand filtered water. Also, when using raw water as a feed of membrane, minimum fouling rate was 2.173 kPa/cycle with 25 mg/L of PACl and when using sand filtered water, the minimum fouling rate was 0.301 kPa/cycle with 5 mg/L of PACl.