• Journal of Chest Surgery
• /
• 제14권3호
• /
• pp.228-234
• /
• 1981

Measurement of cardiac output by thermodilution method is easy to perform and can be repeated at very short intervals and offers a number of theoretical and practical advantages. The purpose of this paper is to reevaluate the accuracy and reproducibility of the thermodilution cardiac output by comparing the results with those obtained by the direct Fick technique. From January through April 1981 [4 months], 26 simultaneous cardiac output measurements were made using thermodilution and direct Fick methods in 12 patients in the intensive care unit of Severance Hospital following open heart surgery. The average age of the patients was $34.8{\pm}12.0$ [SD] years [range; 17-57 years]. For cardiac output determination by thermodilution technique [$CO_TD$], a Swan-Ganz Thermodilution Catheter, Model 93A-131-7F [Edwards Laboratories], a Cardiac Output Computer, Model 9520A, and Strip Chart Recorder, Model 9810 [Edwards Laboratories] were used. For the determination of cardiac output by direct Fick principle [$CO_Fick$], a Van Slyke Manometric Apparatus [Thomas] for the measurements of arteriovenous oxygen content difference and a Collin`s Respirometer with Kymograph for the measurement of oxygen consumption were used. The correlation between the simultaneously measured $CO_TD$ and $CO_Fick$ was found to be $CO_Fick$ = 0.95.$CO_TD$ + 0.1073, [r= 0.9777, P < 0.001 ]. For 26 double or triple determinations of $CO_TD$, the values ranged from 1.77 L/min to 6.66 L/min, with a reproducibility of 2.18%. The maximum difference of $CO_TD$ for $CO_Fick$ was between +11.99% and -12,99% [$Mean{\pm}SD$ = $6.07{\pm}3.97$%]. Measurement of cardiac output by thermodilution method provides a simple, rapid, reproducible and highly accurate method for multiple cardiac output measurements suitable for use at the bedside. Comparison of Cardiac Output Determination by Direct Fick and Thermodilution Method in Man.

• 한국건축시공학회지
• /
• 제11권3호
• /
• pp.247-255
• /
• 2011

한국은행에서 2000년도에 발행된 산업연관표를 적용한 주요 건축자재의 에너지소비량과 $CO_2$ 배출에 대한 원단위 DB는 있지만 2005년, 2007년에 발행된 산업연관표를 이용한 원단위 DB는 없는 실정이다. 본 연구에서는 최근에 발행된 2005년, 2007년도 산업연관표를 이용하여 주요 건축자재에서 발생되는 에너지소비량 및 $CO_2$ 배출 원단위 값을 산정하고자 한다. 주요 건축자재의 에너지소비량 및 $CO_2$ 배출원단위 산출을 위한 방법은 산업연관표를 이용한 DB 구축 방식을 바탕으로 산출하였으며, 건설현장에서 주로 사용되는 16가지의 건설자재는 선별하여 적용하였다. 기존 연구결과에서 제시한 2000년도 산업연관표를 적용하여 산출된 원단위 DB 값과 비교한 결과 근소한 차이를 보이고 있어 본 연구의 산출방법이 적정한 것으로 판단하였다. 2005년, 2007년도 산업연관표를 이용하여 산출한 에너지소비량과 $CO_2$ 배출 원단위 값은 감소세를 보이고 있는 것으로 나타났으며, 시멘트와 철근을 주원료로 하는 자재에서 가장 많은 에너지소비량 및 $CO_2$ 배출 원단위 값을 나타났다. 본 연구의 결과를 통해 국내 실정에 적합한 건설자재 생산단계에서 발생되는 환경부하의 간접적인 예측이 가능할 것으로 사료된다.

• 한국광학회지
• /
• 제1권2호
• /
• pp.155-161
• /
• 1990

메틸알코올 레이저의 여기용으로 저속축류형의 가변파장 $CO_2$ 레이저를 제작하였다. 파장가변은 ZnSe Brewster 창과 반사 회절격자를 사용하였으며, 반사 회절격자는 Blaze wavelength 10.6$\mu\textrm{m}$, 100grooves/mm 인 평면형이다. 실험은 $CO_2$ 레이저의 연속발진 출력특을 살펴보고, $CO_2$ 레이저의 전 발진구간을 파장가변시켜 얻어진 출력분포를 $CO_2$ 레이저의 이득 곡선과 비교하였다. 연속발진 출력은 기체 혼합비 $CO_2: N_2$ : He=1:3:10, 전류 55mA, 압력 14 torr 일 때 100W를 얻었다. 가변된 파장은 10.4$\mu\textrm{m}$ 영역의 R(6)-R(38), P(6)-P(36), 9.4$\mu\textrm{m}$ 영역의 R (10)-R(32), P(10)-P(38)의 약 60여개의 회전선이 발진함을 확인하였고, 이 때의 파장은 9.3295$\mu\textrm{m}$에서 10.7648$\mu\textrm{m}$까지 변화하였다. 각 영역에서 얻어진 출력분포는 $CO_2$ 레이저의 이득곡선과 잘 일치하였고, 최대 출력은 20W 정도였다.

• 센서학회지
• /
• 제27권5호
• /
• pp.294-299
• /
• 2018

This article describes the output properties of non-dispersive infrared carbon dioxide($CO_2$) sensors resulting from the changes in ambient temperatures. After the developed sensor module was installed inside the gas chamber, the temperature was set to 267 K, 277 K, 300 K, and 314 K, and the concentrations of $CO_2$ gas were increased from 0 to 5,000 ppm. Then, the output voltage at each concentration was obtained. Through these experimental results, two observations were made. First, both the $CO_2$ sensor and the reference sensor showed an increase in the output voltages as the temperature rose from 0 ppm, Second, the full scale outputs of the $CO_2$ sensor grew as the temperature increased. The output characteristics were analyzed based on two factors: change in the radiant energy of the infrared light source and change in the absorptivity of $CO_2$ gas according to the ambient temperature. Additionally, temperature compensation methods were discussed.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.417-420
• /
• 2007

1997년 교토 기후협약이 체결되었고, 우리나라도 2013 년부터 기후협약 규제가 거의 확실시 되고 있다. 화석 연료의 연소로 대부분의 전력 을 생산하는 발전 산업은 우리나라 CO2 배출량의 25%를 차지하고 있으며, 발전소의 전력 생산에 따른 CO2배출량의 계산은 매우 중요한 일이 되었다. 본 논문은 발전소의 시험data 와 IPCC (Intergovernmental Panel on Climate Change)의 온실가스 추계방법론을 이용하여 시간당 CO2 대기 배출량을 계산하는 방법을 제시한다. 발전출력에 대한 CO2 배출량을 계산하는 한 예를 도시하였다.

• 센서학회지
• /
• 제25권2호
• /
• pp.124-130
• /
• 2016

NDIR $CO_2$ gas sensor was built with ASIC implemented thermopile sensor which included temperature sensor and unique elliptical waveguide structures in this paper. The temperature dependency of dual infrared sensor module ($CO_2$ and reference IR sensors) has been characterized and its output voltage characteristics according to the temperature and gas concentration were proposed for the first time. NDIR $CO_2$ gas and reference IR sensors showed linear output voltages according to the variation of ambient temperatures from 243 K to 333 K and their slopes were 14.2 mV/K and 8.8 mV/K, respectively. The output voltages of temperature sensor also presented a linear dependency according to the ambient temperature and could be described with V(T)=-3.191+0.0148T(V). The output voltage ratio between $CO_2$ and reference IR sensors revealed irrelevant to the changes of ambient temperatures and gave a constant value around 1.6255 with standard deviation 0.008 at 0 ppm. The output voltage of $CO_2$ gas sensor at zero ppm $CO_2$ gas consisted of two components; one is caused by the HPB (half pass-band) of IR filter and the other is attributed to the part of $CO_2$ absorption wavelength. The characteristics of output voltages of $CO_2$ gas sensor could be accurately modeled with three parameters which are dependent upon the ambient temperatures and represented small average error less than 1.5% with 5% standard deviation.

• 조명전기설비학회논문지
• /
• 제21권5호
• /
• pp.120-125
• /
• 2007

1997년 지구온난화 문제를 해결하기 위해 교토 기후협약이 체결되었고, 우리나라도 2013년부터 기후협약 규제가 거의 확실시 되고 있다. 우리나라 온실가스 배출량은 연간 약6억 톤이며, 그 중 CO2가 5억 톤이다. 특히 화석연료의 연소로 대부분의 전력을 생산하는 발전 산업은 우리나라 CO2 배출량의 20[%] 이상을 차지하고 있다. 따라서 발전소의 전력생산에 따른 화석연료의 소모량과 이에 따른 CO2 배출량을 monitoring하는 것이 매우 중요해졌다. 본 논문은 발전소의 성능시험 결과 얻어지는 입출력 특성계수와 IPCC(Intergovernmental Panel on Climate Change)의 온실가스 추계 방법론을 이용하여 순시 발전출력에 따른 CO2 대기배출량을 계산하는 방법을 제시하였다. 4모선 모형계통의 시뮬레이션을 통하여 전력계통의 조류계산과 발전소별 CO2 배출량을 연립 연산하는 예를 도시하였다.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.102-107
• /
• 2014

SCR(Thyristor) type $CO_2$ welders have widely used for the welding process of heavy industries such as shipbuilding and plant. Since the industrial fields of shipbuilding and plant are usually exposed to severe welding condition with lots of dust, extreme temperature, high humidity and vibration, it is not recommended to use inverter type welder despite its state-of-the-art technology. Many sophisticated functions in the inverter welder may not work due to malfunction of its sensitive components. Hence this study focused on digitalization of SCR $CO_2$ welder by making use of microprocessor for SCR phase control. By this application, fine control of output of the $CO_2$ welding systems is achieved. Also pulse output mode of operation is realized and its verification is carried out with aluminum sample welding. The experimental results showed sound weld bead. The front operation panel provide user with numerical parameter settings and monitors. It will help precise weld process monitoring and control with digital value.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1831-1833
• /
• 2003

Nowadays, CO2 lasers are used widely in many applications such as materials fabrication, communications, remote sensing and military purpose etc. Especially, CO2 lasers are in the spotlight at surface handling and heat processing. It is important to control the laser output power and beam quality in those fields. To increase beam qualify, We used the feedback system by various sensors. Although, CO2 lasers' output beam became feedback, its beam affected the irradiated material target already. Since, ideal real time control have still the problem to solve. Hence, we need the new proposal for more precise laser processing. So we expect the new effect how to change the irradiated material target as the kind of, processing time and output density caused by the CO2 laser beam. In this study, We have investigated the characteristics of the temperature and HAZ(Heat Affected Zone) by CO2 laser output with IR temperature sensor and RTD.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.36-39
• /
• 2003

The push pull forward converter is a very suitable circuit for low output voltage, high output current applications with a wide input voltage range. All the magnetic components (output inductor, transformer, input filter) can be integrated into a single core. The integrated magnetics can reduce the number of the magnetic components. Developed the push pull forward converter rating are of 36 $\~$72V input and 3.3V/30A output. In this converter, the efficiency was measured by $76.4\%$ at full load and 82.95$\%$ at full load. The maximum efficiency is up to 83.$\%$ at 200kHz switching frequency, l1A output.