• 한국안전학회지
• /
• 제19권2호
• /
• pp.104-111
• /
• 2004

The aim of this study was to investigate the influence of inorganic pigments on the physical properties of cement mortar. For this purpose, the compressive strength and absorption test were carried out on cement mortar imxed with inorganic pigments by changing the proportion of cement mortar, water-cement ratio, and ratio of pigment. The result of this study can be summarized as follows: the compressive strength of colored mortar rapidely increased in red and yellow mortar, as the mix ratio of pigment increased. In case of green and black mortar, however, the compressive strength decresed as the mix ratio incresed. In case of red and yellow mortar, the absorption of colored mortar increased as the mixing ratio increased, if the mean particle diameter of the pigment is small. In case of green and black mortar, the absorption ratio decreased as the mix ratio increased. After investigating the overall physical properties of colored mortar, it was confirmed that the proper mix ratio of pigment securing the properties of colored mortar was below 6% of the weight of the cement to be used.

• The Journal of Advanced Prosthodontics
• /
• 제5권2호
• /
• pp.75-83
• /
• 2013

PURPOSE. Maxillofacial silicone elastomer is usually colored intrinsically with color pigments to match skin colors. The purpose of this study was to investigate the color stability of a maxillofacial silicone elastomer, colored with a thermochromic, color changing pigment. MATERIALS AND METHODS. Disc-shaped maxillofacial silicone specimens were prepared and divided into 3 groups: a conventionally colored control group, one group additionally colored with 0.2 wt% thermochromic pigment, and one group with 0.6 wt% thermochromic pigment. Half of the surface of each specimen was covered with an aluminium foil. All of the specimens were exposed to UV radiation in 6 hour cycles over 46 days. In between the UV exposures, half of the specimens were stored in darkness, at room temperature, and the other half was stored in an incubator, at a humidity of 97% and a temperature of $+37^{\circ}C$. Color measurements were made with a spectrophotometer and registered according to the CIELAB $L^*a^*b^*$ color model system. The changes in $L^*$, $a^*$ and $b^*$ values during artificial aging were statistically analyzed by using paired samples t-test and repeated measures ANOVA. P-values <.05 were considered as statistically significant. RESULTS. The UV exposure resulted in visually noticeable and statistically significant color changes in the $L^*$, $a^*$ and $b^*$ values in both of the test groups containing thermochromic pigment. Storage in the incubator lead to statistically significant color changes in the $a^*$ and $b^*$ values of the specimens containing thermochromic pigment, compared to those stored at room temperature. CONCLUSION. The specimens containing thermochromic pigment were very sensitive to UV radiation, and the thermochromic pigment is not suitable, as such, to be used in maxillofacial prostheses.

• 펄프종이기술
• /
• 제43권4호
• /
• pp.76-81
• /
• 2011

This study was carried out in order to develop a speciality functional coated paper, which can be recognized under a ultraviolet lamp. The special fluorescent whitening agent (FWA) which absorbs ultraviolet light (397~410 nm) and emits it as yellowish light (570~500nm) was used. The special FWA was applied in a coating color in two ways: (1) direct application to a coating color as a FWA; (2) application on pigment surface, drying it and application it as a fluorescence whitening pigments (colored pigments). The effects of the special FWA on coating color properties were tested and the distribution of colored pigments in coated paper was evaluated under a ultraviolet lamp. The results showed that the colored pigments didn't affect on coating color properties. Experimental results showed the possibility of producing a security coated paper using the special FWA. To produce a speciality functional paper, it was found to be proper to apply the special FWA in the form of colored pigment.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권8호
• /
• pp.1213-1220
• /
• 2018

Objective: An experiment was conducted to assess the antioxidant contents and activities of colored rice grains and to evaluate their nutritive characteristics in terms of chemical composition and in situ ruminal degradation. Methods: Ten cultivars of colored rice grains (Oryza sativa L.) collected from several areas of Japan were studied, and control rice without pigment, maize, barley, and wheat grains were used as control grains. Their chemical compositions, pigment, polyphenol contents, total antioxidant capacity (TAC), and degradation characteristics were determined. Results: The starch contents of the colored rice grains were in the range of 73.5% to 79.6%, similar to that of the control rice grain. The black and red rice grains contained anthocyanin (maximum: $5,045.6{\mu}g/g$) and proanthocyanidin (maximum: $3,060.6{\mu}g/g$) at high concentrations as their principal pigments, respectively. There were significantly (p<0.05) positive relationships among the pigment contents, polyphenol content, and TAC values in the colored and control rice grains, indicating that the increase in pigment contents also contributed to the increased polyphenol content and TAC values in the colored rice grains. The dry matter and starch degradation characteristics, as represented by c (fractional degradation rate of slowly degradable fraction) and by the effective degradability, of the colored rice grains and the control rice grain were ranked as follows among commonly used grains: wheat>barley${\geq}rice$>maize. The colored rice grains also included the most-digestible starch, since their potential degradable fraction and actual degradability at 48 h incubation were almost 100%. Conclusion: Colored rice grains have high potential to be used as antioxidant sources in addition to starch sources in ruminants.

• 한국의상디자인학회지
• /
• 제3권2호
• /
• pp.107-119
• /
• 2001

Compared on dye, pigment is not colored to textiles, fixed by binders, so it has been used for less expensive textiles. However, the function of a binder hs been improved s organic chemical industry develops, and the flexibility and softness of textiles hs gotten better. Some of dye printing is being replace by pigment printing. Pigment printing skills illuminated and make colors represented cleariy. Since their durabillty is reasonably good and washing processes are not needed, further development of these printing skills are predictable. This study suggests color samples though theoretical researches and experiments on pigment printing that causes less pollution and en be colored on any type of textiles. Especially, over printing can be used in industrial fields because it saves processing and expense. For the improvement of pigment printing skills, more improved studies on binders are expected.

• 한국식품과학회지
• /
• 제35권5호
• /
• pp.951-958
• /
• 2003

국내 외에서 수집 재배한 24품종 유색미를 순차적인 유기용매 처리에 의해서 지용성 분획과 색소를 함유하는 분획, 색소성분 만의 분획을 얻었고 각 분획이 가지는 항산화성 및 항변이원성을 검정하였다. 유기용매 추출이 진행되어 분획성분의 조성이 간단해질수록 품종마다 차이는 없지만 항산화성은 오히려 약화되는 경향이 있었는데. 특히 LK 1-3-6-12-1-1과 길림흑미의 항산화 활성이 상당히 낮았다. 70%에탄올 추출물에서는 항변이원성을 나타내던 유색미 품종들도 색소분획을 포함하는 분획들에서는 모든 품종에서 오히려 변이원생을 나타내고 있었으며, 특히 wx 124-153-45-7-1-1-1 및 LK 1B-2-1-1 등에서 강한 변이원성이 관찰되었다. 유색미 품종별 색소의 함량은 IR 17491-5-4-3-3>LK 1-3-6-12-1-1>LK ID-2-12-1>RGS No336. Elwee 등의 순서로 나타난다. 유기용매에 의해서 분획되는 성분들의 조성 및 함량이 유색미 품종들과 일반미 품종간에는 상당히 차이가 있음을 알 수 있었으며, 일반미 품종에 비교하면 유색미 품종들의 유기용매에 의해서 용출되는 수된 성분 분사들은 긴 탄화수소를 가진 성분들이었다.

• Fibers and Polymers
• /
• 제6권3호
• /
• pp.263-268
• /
• 2005

Alpaca fibers have some distinct properties such as softness and warmth, which have not been fully understood in combination with the fiber internal structures. In the present investigation, the internal structures of alpaca fibers have been closely examined under the scanning electron microscope (SEM), especially in the longitudinal direction. The results showed that numerous pigment granules reside loosely inside pockets in brown and dark-brown alpaca fibers. These pigment granules were mainly distributed inside the cortical cells, the medullation regions as well as underneath the cuticles. Their size in the brown alpaca fibers was smaller and more uniformly round than in the dark-brown fibers. These granules in colored alpaca fibers loosen the bundle of cortical cells, providing many crannies in the fibers which may contribute to the superior flexibility, warmth and softness of the fibers. Moreover, there are no heavy metal elements found in the granules. The mordant hydrogen peroxide bleaching employed could eliminate the pigment granules and create many nano-volumes for further dyeing of fibers into more attractive colors.

• 한국작물학회지
• /
• 제41권spc1호
• /
• pp.1-9
• /
• 1996

The edible natural pigments extracted from plant organs become steadly popular to consumer because of those physiological functions desirable for food preservation and human health in recent years. There are a number of colored rice genotypes from light brown to blackish purple via reddish brown and purple. Some researchers reported their results on extraction recipes and identification of chemical structure of the pigments from the colored rice. The pigments extracted from colored rices can be largely divided into two types of anthocyanin and tannin pigments. Anthocyanin pigments are mainly contained in purple or blackish purple rice while tannin pigments are mainly contained in brown or reddish brown rice. Some brownish purple rices showed two peaks of tannin and anthocyanin pigments simultaneously. Purple rices showed better extraction of pigments in $0.1\%$ HCl-contained $80\%$ methanol or $0.5\%$ malic-acid-contained $80\%$ ethanol, while red rices revealed better extraction of pigments in $0.01\%$ citric-acid-contained $80\%$ ethanol. The anthocyanin pigments are generally unstable to heat, light and acidity of solution. The pigments extracted from colored rice can be preserved stably under the dark and cool(<$5^{\circ}C$) condition and at pH $2.0\~4.0$. The anthocyanin pigments of purple rice are mainly composed by cyanidin-3-glucoside (chrysanthemin). The other pigment fractions in purple rice were identified to peonidin-3-gluco-side, malvidin-3-galactoside(uliginosin) and cyanidin-3-ramnoglucoside(keracyanin). The pericarp coloration of purple rices is controlled by three complimentary genes C (anthocyanin), A(activator) and $Pl^{w}$(purple leaf) genes, while the red rices are expressed by complimentary interaction between Rc(basic substance of pigment) and Rd(distribution of pigment) genes or C and $Pl^{w}$ genes. Recently, the antioxidation and antimutagenic activity in main component of anthocyanin pigments extracted from colored rice were identified. The natural pigments from colored rice can be useful for beverages, cakes, ice scream, cosmetic and so on.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.131-132
• /
• 2023

Recently, the construction industry has seen the emergence of interior and exterior finishes using ultra-high performance concrete (UHPC) and colored concrete products using precast concrete (PC). However, the excessive amount of pigment used for coloring reduces the strength of the concrete. There is a need to improve the durability and chromaticity of colored concrete, and further analytical studies on the properties of colored concrete are also required. Therefore, in this paper, colored ultra-high strength cement composites (C-UHSCC) containing red and green inorganic pigments were prepared, and the compressive strength and color of the specimens were measured according to the age, and the correlation between strength and color was analyzed by simple linear regression analysis using R² value. The results showed that the red color was highly correlated with L^* and a^*, and the green color was highly correlated with a^*. These results can be considered for various concrete formulations, but research is needed to suggest the optimal pigment mixing ratio for proper strength and color development.

• 한국안광학회지
• /
• 제10권2호
• /
• pp.127-132
• /
• 2005

칼라콘택트렌즈는 의료용으로 사용되기 시작하여 최근 들어 미용의 목적으로 그 수요가 급격히 증가하고 있는 추세이다. 칼라콘택트렌즈의 제조방법으로는 pigment application method, pigment inlay method, sandwich method, binding method 등이 있는데 현재 국내에서는 binding method가 주로 사용된다. 칼라 콘택트렌즈의 용도와 제조 방법 면에서 채색(tinted)과 착색(cosmetic)으로 크게 분류되는데 채색은 염색방식으로 널리 알려진 방법이며, 착색은 박막공법에 의해 제조된다. 이에 따라 본 해설의 목적은 칼라콘택트렌즈의 제조방법 및 방법에 따른 특성을 비교하고, 칼라콘택트렌즈의 특성을 이해하는데 도움을 주기 위함이다.