• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1629-1632
• /
• 2006

A novel column spacer with concaved top surface has been made through conventional photolithography process. The mechanical characteristics of this spacer were also investigated by using load-unload cycle test. According to the experimental results, the deformation ratio of this new designed spacer is larger than that of conventional column spacers about two times in the lower loading stage. At the higher loading stage there is no obviously difference in deformation ratio between the new designed spacer and the conventional spacer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.809-810
• /
• 2012

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.288-291
• /
• 2003

The technology and performance of the world-largest 54-inch LCD TV using PVA mode have been introduced from two points of view: one is to manufacture large-size panels, the other is to improve electro-optical performance required for multimedia applications. Current ongoing research activities that have been explored include new stitching design, one drop filling with column spacer, response time less than one frame rate, color performance and light efficiency enhancement.

• Steel and Composite Structures
• /
• v.16 no.4
• /
• pp.437-454
• /
• 2014

The influence of spacers on the behaviour and ultimate capacity of intermediate length CFS open section columns under axial compression is investigated in this paper. The focus of the research lies in the cross- section predominantly, failed by distortional buckling. This paper made an attempt to either delay or eliminate the distortional buckling mode by the introduction of transverse elements referred herein as spacers. The cross-sections investigated have been selected by performing the elastic buckling analysis using CUFSM software. The test program considered three different columns having slenderness ratios of 35, 50 & 60. The test program consisted of 14 pure axial compression tests under hinged-hinged end condition. Models have been analysed using finite element simulations and the obtained results are compared with the experimental tests. The finite element package ABAQUS has been used to carry out non-linear analyses of the columns. The finite element model incorporates material, geometric non-linearities and initial geometric imperfection of the specimens. The work involves a wide parametric study in the column with spacers of varying depth and number of spacers. The results obtained from the study shows that the depth and number of spacers have significant influence on the behaviour and strength of the columns. Based on the nonlinear regression analysis the design equation is proposed for the selected section.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.208-210
• /
• 2008

We have developed a LCD Panel that form storage capacitance for pixels between pixel electrode of bottom glass and common electrode of top glass. This method could make higher transmission and higher production yield than before by removing storage electrode line and capacitance on the bottom glass by simplifying bottom pixel structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1203-1206
• /
• 2004

마이크로 컬럼은 차세대 리소그라피 기술의 하나로 마이크로 컬럼의 기능이 기존의 전자빔 컬럼을 능가하여 주목을 받는다. 초소형 전자빔 컬럼은 기존의 전자빔 컬럼과 비교하여 수차, 렌즈의 크기 및 원형에 성능이 보다 민감하게 반응하므로 정확한 정렬과 가공 기술은 초소형 전자빔 마이크로 컬럼의 성능에 매우 중요하다. 그러나, 기준치 piezoelectric transducer (PZT)나 scanning tunneling microscopy (STM)을 이용한 정렬 기술은 매우 복잡하고 어려운 단점이 있다. 본 연구에시는 레이저 회절 패턴방식과 레이저 정밀 가공으로 실리콘 렌즈와 파이렉스 spacer를 정확하게 교대로 조립하였으며, 이 방법으로 완성된 마이크로 컬럼의 STEM동작을 조사하였다.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.04a
• /
• pp.145-145
• /
• 1993

일반적으로 단백질의 정제를 위한 가장 효과적인 방법은 affinity chromatography법으로 알려져 있다. 본 연구에서는 베타 수용체의 순수정제를 위한 효과적인 affinity matrix를 제조하고 이의 특징을 확인함으로써 수용체 정제를 위한 기초를 수립하고자 하였다. Bisoxirane reagent인 1,4-butanediol diglycydyl ether를 Sepharose CL-4B gel과 반응시켜 탄노원자 10개 길이의 spacer arm을 부착시켰다. 여기에 sodium persulfate, dithiothreitol을 연속적으로 사용하여 -SH기를 도입시긴 추 free radical 반응을 이용하여 베타수용체 길항제인 alprenolol을 부착시킴으로써 affinity gel을 제조하였다. alprenolol치 부착반응을 위한 최적온도는 4$0^{\circ}C$로 나타났으며, semimicro Kjeldahl 질소 분석법을 적용하여 gel을 분석한 결과 ml당 0.4-0.6 $\mu$ mol의 alprenolol이 결합하였음을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1531-1534
• /
• 2009

Effect of process factors on the sensitivity of inner-type digital switching TSP was analyzed. From these results, we have successfully fabricated inner-type digital switching TSP embedded in 3.2-inch WQVGA PLS mode LCD panel. During many factors, TFT sensor structure for reducing the PI thickness and a separation distance of $0.3{\mu}m$ between the conductive column spacer (C/S) and TFT sensor were essential. Glass thickness and main C/S density were also important factors. This technology can be applied to wide angle of view hand-held phones, personal digital assistants (PDAs), and tablet PCs.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.415-422
• /
• 2013

White-light phase-shifting interferometry (WLPSI) is widely recognized as a standard method to measure shapes with high resolution over a long distance. In practical applications, WLPSI, however, is associated with some degree of ambiguity of its phase, which occurs due to a phase delay, which is the offset between the phase of the fringes and the fringe envelope peak position. In this paper, a new algorithm is proposed for the determination of a fringe order suitable for samples in which the phase delay mainly occurs due to noise, diffraction and a steep angle. The concepts of the decouple factor and the connectivity are introduced and a method for calculating the decouple factor and the connectivity is developed. With the phase-unwrapping procedure which considers these values, it is demonstrated that our algorithm determines the correct fringe order. To verify the performance of the algorithm, a simulation was performed with the virtual step height under noise. Some specimens such as step height standard and a column spacer with a steep angle are also measured with a Mirau interference microscope, after which the algorithm is shown to be effective and robust.

• Korean Journal of Plant Taxonomy
• /
• v.50 no.4
• /
• pp.385-394
• /
• 2020

To elucidate the molecular phylogeny of Neottia japonica, which is a terrestrial orchid distributed in East Asia, the internal transcribed spacer (ITS) of nuclear DNA and the matK of chloroplast DNA were used. A total 22 species of 69 accessions for ITS and 21 species of 114 accessions for matK phylogeny were analyzed with the maximum parsimony and Bayesian methods. In addition, we sought to establish a correlation between the distribution, morphology of the auricles and genetic association of N. japonica with phylogenetic data. The phylogenetic results suggest that N. japonica is monophyletic and a sister to N. suzukii in terms of the ITS phylogeny, while it is paraphyletic with N. suzukii in terms of the matK phylogeny. N. japonica and N. suzukii show similar morphologies of the lip and column, they both flower in April, and they are both distributed sympatrically in Taiwan. Therefore, it appears to be clear that N. japonica and N. suzukii are close taxa within Neottia, although there is incongruence between the nrDNA and cpDNA phylogenies of N. japonica. The incongruence between the two datasets may have various causes, meaning that further studies are needed to confirm the evolutionary process of N. japonica. The phylogenetic status of N. kiusiana, which was not included in previous studies, was as a sister to N. nidus-avis. Meanwhile, the ITS and matK phylogenies are unsuitable for identifying genetic associations with the characteristic of auricles. The phylogenetic topologies of Korean, Taiwanese and mainland Chinese individuals suggest that the populations of N. japonica in Korea originated from China's mainland and island areas. The characterization of regional gene differences could provide useful preliminary data for future studies.