• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.3
• /
• pp.1-8
• /
• 2010

A design study has been performed to obtain configuration and weight of a compound gyroplane. A study of research trends and characteristics was performed to develop the compound gyroplane sizing program. Based on these results, the sizing program has been developed and its suitability has been validated using existing compound gyroplane data. The subject air vehicles was a Challis Heliplane UAV, Carter Coptet, FB-1 Gyrodyne, and Jet Gyrodyne. As results, the program was suitable to size a compound gyroplane at conceptual design phase, because the greatest error rate was less than 10% and the conceptual design allowance error rate is less than 15%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.6
• /
• pp.452-463
• /
• 2018

Tip-jet gyroplane is a type of compound helicopter that employs the tip-jet system to rotate the rotor by a reaction force from the gas jetted at the rotor tips in hovering. In forward flight, tip-jet gyroplane converts into a form of a gyroplane. Therefore, it is necessary to develop a new conceptual design method to consider three flight modes: tip-jet mode, gyroplane mode, and transient mode. This study developed the numerical code of conceptual design methodology that can consider three flight modes. The developed code was validated against the available experiment data. Based on the developed code, initial sizing of tip-jet gyroplane was performed for two mission profiles including high speed forward flight of 150knots with a mission range of 300km or 400km. Subsequently, the configuration and performance of the 3,000lb tip-jet gyroplane were analyzed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.11
• /
• pp.971-977
• /
• 2015

A numerical analysis for the performance of compound gyroplane in forward flight was performed. TSM(Transient Simulation Method) was used to analyze the performance of autorotating rotor. CFD was conducted for the fuselages to recognize the variation of aerodynamic performance according to flight speed. At given conditions; airspeed, shaft angle and collective pitch, the quasi-static states of autorotation were determined and the variation of rotor performance was observed. Performance analysis results showed that the effect of aerodynamic characteristics in accordance with the shape of fuselage is so important that the streamlined fuselage is essential to fly fast. Forward flight speed limit is dependent on the autorotation performance of rotor.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.11
• /
• pp.978-983
• /
• 2015

A study on the speed limit and sizing of auxiliary fixed-wing of compound gyroplane was performed. The performance of the plane that uses the same rotor system and power of BO-105 helicopter was compared with that of BO-105 helicopter. The wing area which is used to compensate in lift, was calculated considering the aerodynamic characteristics and lift sharing ratio of the rotor. Achievable flight speeds were observed for two types of fuselage; BO-105 and streamlined bodies. The study showed that the autorotating rotor can share 1/2 of lift at high speed and the parasite power of compound gyroplane having streamlined body and small wing can be minimized, accordingly it can fly faster than helicopter with airspeed more than twice.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.3
• /
• pp.60-67
• /
• 2014

Technical history of VTOL aircraft is examined from the early helicopter appearance to recent experimental rotorcraft in order to distinguish the core issues of those aircraft. Performance and technological challenges of some VTOL aircraft such as tilt rotor, convertiplane, gyroplane, and coaxial helicopter are discussed. As a new generation high performance rotorcraft, Sikorsky X2 is intensively investigated. Considering the developmental history of X2, the autorotational ability at high speed is recognized as a core technology. Analytic method of autorotation and some results are shown and presents research subjects related to the future Korean high performance rotorcraft.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.9-13
• /
• 2016

Reaction drive rotor system is capable of providing hover and low speed capabilities to different aircraft concepts such as stopped rotor wing, canard rotor wing, compound gyroplane etc. Existing sizing and analysis tools for shaft drive rotor system cannot be applied directly to this system. The available methodologies to size this system were reviewed. Power available calculation procedure and factors affects it were addressed prior to sizing process. Various design issues of this system due to interrelationship of internal gas flow dynamics and rotor external aerodynamics was discussed. Finally, a modification that is required in existing sizing methodologies was identified and combined approach in sizing process to consider the interrelationship among engine, rotor and blade duct was introduced.