• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.105-113
• /
• 2006

This work is concerned with the development of digital contouring controller for multi-axial servosystems. Digital optimal contouring controller is proposed to coordinate each of the controllers of multiple feed drives and specifically improve the contouring performance. The optimal control formation includes the contour error explicitly in the performance index to be minimized. The contouring control is exercised for straight line and circular contours. Substantial improvement in contouring performance is obtained for a range of contouring conditions. Both steady state and transient error measures have been considered. The simulation study presented has established the potential of the proposed controller to improve contouring performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.466-471
• /
• 1996

This work is concerned with the development of digital contouring controller formulti-axial servosystems. Digital optimal contouring controller is proposed to coordinate each of the controllers of multiple feed drives and specifically improve the controuring performance. The optimal control formulation includes the contour error explicity in the performance index to be minimized. The contouring control is exercised for straight line and circular contours. Substantial improvement in contouring perfomance is obtained for a range of contouring conditions. Both steady state and transient error measures have been considered. The simulation study presented has estiblished the potential of the proposed controller to improve contourning perfomance.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.166-170
• /
• 2003

Contouring errors are important especially for high speed and precision machining. In this study, contouring errors along contours having inflection points are studied. When a table of a machine tool moves along a circular path, acceleration acts toward the center of the circle. Thus, at inflection points, acceleration as well as inertia force changes its direction abruptly. The effect of inertia force on the contouring error is investigated in this study. It is found that the contouring error at an inflection point is proportional to the acceleration. This result can be useful in determining contouring errors along general paths.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.168-175
• /
• 2011

Contouring accuracy of CNC machine tools is very important for high-speed and high-precision machining. In particular, large contour error may occur during corner tracking. In order to reduce the corner contouring error, acceleration and deceleration control or tool-path planning methods have been suggested. However, they do not directly control the corner contouring error. In the meantime, network servo systems are widely used because of their easiness of building and cost effectiveness. Communication latency between the master controller and servo drives, however, may deteriorate contouring accuracy especially during corner tracking. This paper proposes a control strategy that can accurately calculate and directly control the corner contouring error. A prediction control is combined with the above control to cope with communication latency. The proposed control method is evaluated through computer simulation and experiments. The results show its validity and usefulness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1162-1165
• /
• 2003

Contouring errors are important especially for high speed and precision machining. Since the contouring errors of a machine tool affect the error of a machined part directly, it is necessary to find the contouring errors by some relevant tests. In this study, contouring errors are obtained by performing circular tests with a grid plate. Various error sources are diagnosed by a least square method.

• Archives of Plastic Surgery
• /
• v.38 no.2
• /
• pp.166-172
• /
• 2011

Purpose: Facial contouring surgery for improving congenital, acquired deformity and senile change were attempt in past. Recently contouring surgery became more interested subject for improving the flat forehead and temple area. Many synthetic materials were used such as Collagen, silicon, polyacrylamide gel as liquid form and Gore-tex, silicon implant, endotine as solid form. But, these synthetic implants associate complications as foreign body reaction, infection, displacement, granuloma formation and absorption. Auto-fat injection are used for disfigurement of many part of body. We did auto-fat injection for facial contouring of forehead and temple region. Auto-fat injection is suitable without foreign body reaction, displacement, and toxic reaction. Also auto-fat is relatively simple to obtain from patient and less expensive and able to repeat surgeries. Methods: From 2006 to 2009, 150 patients were treated with Auto-fat injection for facial contouring. For follow up, we sent questionnaire to all patients but 110 patients returned answer sheets. The patients consisted of 20 male patients and 90 female patients with an age ranged from 26 to 60, and the mean 43. Fat tissue were injected 6-8 cc in forehead, 7-12 cc in temple area and fat were harvested from thigh and abdomen. Results: In follow up, all patients, showed absorption of injected fat varied degree and except two patients all patients underwent secondary fat injection. Complications were minimal and neuropraxia of facial nerve were recovered. Most of the patients were satisfied with result of procedure, and answered that they recommend same procedure to their friends and will do surgery again. Conclusion: Auto-fat injections were implemented for facial contouring in 150 patients and obtained satisfactory result. Auto-fat injection is relatively easy procedure and applicable widely. Even though, by passing time, some of the injected fats are absorbed, auto-fat injection could be choice of treatment for contouring forehead and temple. With accumulations of cases and development of surgical technique, better result could be expected.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.2
• /
• pp.60-63
• /
• 2016

Fibrous dysplasia is quite a rare disease usually involving maxilla and mandible. Because of its benign clinical course, conservative contouring surgery has been recommended for facial deformity. 3D rapid prototype (RP) model gives a lot of informations before operation such as depth of drilling, area of resection and important anatomic structure. The purpose of this study was to report maxilla-mandibular contouring surgery in fibrous dysplasia patients. A total of 14 consecutive patients were included for surgical and esthetic evaluation. Among 14 patients, RP model study was performed in two patients with severe facial deformity. The other patients underwent contouring surgery under conventional methods. Surgical evaluation was performed with computed tomography scan before and after operation. Surgical resection was successful and patients were satisfied with the surgical results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.271-274
• /
• 2001

The present paper deals with the development of digital contouring controller for multiaxial servosystem. Instead of coordinating the commands to the individual feed drives and implementing closed position loop control for each axis, this work is achieved by the evaluation of a optimal cross-couple compensator aimed specifically at improving contouring accuracy in multi-axial feed drives. The optimal control formulation explicitly includes the contour error in the performance index to be minimized. The contouring control is simulated for straight line. The results show that the proposed controller reduces contouring errors considerably, as compared to the conventional uncoupled control for biaxial systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.1003-1006
• /
• 2002

In machining free-form curves with a machine tool equipped with parallel device, improving contouring accuracy is very important. In this paper, we present contouring control algorithm far parallel machine tool. The relation between the error in Joint space and the error in catesian space is evaluated, and we estimate contouring error vector which efficiently determines the variable gains for the cross coupled control. To show the validity of the algorithm, the contouring control is simulated for free form contour trajectory in cubic parallel machine tool model.

• Archives of Plastic Surgery
• /
• v.37 no.3
• /
• pp.293-296
• /
• 2010

Purpose: NTM (non tuberculous mycobacteria) is rare cause of surgical site infection after plastic surgery in immunocompetent patients. There are some reports about NTM infection after body contouring procedure from Latin America. But, there is no report in Korea. The purpose of this article is to report 2 patients with soft tissue infection caused by NTM after body contouring procedure. Methods: Two young female patients exhibited signs of inflammation and abscess after body contouring procedure. One patient underwent liposuction. The other underwent HPL (hypotonic pharmacologic lipo-dissolution) injection. Results: The result of tissue cultures were positive for NTM. All patients responded to the combined therapeutic approach. Conclusion: The goal of this article is to raise awareness among plastic surgeons who may encounter such patients in their practice. NTM should be included in the differential diagnosis of surgical site infection after body contouring surgery.