• Journal of Korean Society for Quality Management
• /
• v.12 no.2
• /
• pp.15-24
• /
• 1984

Since W.A. Shewhart (1931) developed the quality control method using the control chart, many theoretical and empirical works about such an analytical method have been done. However there are two major methods relating to the control chart analysis; the conventional 3 sigma control method and the warning limit method which has been suggested as a modification of the former. The conventional 3 sigma method requires to take a remedial action only when a quality characteristic is beyond the control limit (3 sigma). However, once a quality characteristic is over the control limit, searching and repairing an assignable cause requires time consuming job and high costs. Therefore if we set the warning limit between the central line and the control limit, we will be able to take remedial measures before too late. In spite of its advantage, much attention has not been paid to use the control chart with warning limit in Korean industries. The main object of this study is to examine improvement of quality and productivity when the control chart with warning limit is used.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.3-3
• /
• 2000

Limit cycle analysis of attitude control system using gas jet thrusters is performed. Schmitt-Trigger and PD control laws are applied and solenoid valve time delay is considered. Phase plane method is used for calculation of characteristics of limit cycle. Important characteristics of resultant limit cycle such as frequency, amplitude, maximum rate, and duty ratio could be expressed analytically by proposed method.

• Korean Journal of Childcare and Education
• /
• v.16 no.1
• /
• pp.75-98
• /
• 2020

Objective: This study aimed to examine the influences of household chaos on self-control of young children and to investigate whether teachers' limit-setting styles had moderating effects. Methods: The participants were 184 children (83 boys and 101 girls), at age 3 -5, their mothers and teachers working at daycare centers located in Seoul and Gyeonggi-do. The data were analyzed by descriptive statistics, Pearson's correlation, and hierarchical regression. Moderating effects were examined using the Mplus8.0 program. Results: The results indicated that household chaos as well as teacher's permissive and logical limit-setting styles had significant effects on self-control of preschoolers. The lower the level of household chaos was, the higher the level of self-control of preschoolers was. The level of self-control was more likely to be high when teachers used logical limit-setting with detailed explanation to children whereas it was lower when they used more permissive limit-setting. In addition, teachers' logical limit-setting moderated the relation between household chaos and self-control of preschoolers. That is, the effects of household chaos on preschoolers' self-control were mitigated when the level of logical limit-setting was high compared to when it was low. Conclusion/Implications: The results suggested that both household chaos and teachers' limit-setting styles play important roles in increasing self-control of preschoolers.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.3
• /
• pp.82-91
• /
• 1995

The purpose of this research is to develop a new real-time process control system. In this paper, a theoretical method for acquiring the control limit of cutting process(cutting surface) according to the required value(geometric tolerance) based on geometrical relations was propsed. In particular, the three following points are amphasized. Firstly, the process control was based on the cutting process, and the control limit was determined from the analysis of geometrical relations. Secondly, AMGD(Actual Measured Geometrical Deviation) was used as a new substitute value in process analysis. Thirdly, fuzzy reasoning was introduced to get the control limit flexibility according to the variations in the required value and general consideration of each measurememnt items.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.507-507
• /
• 2000

In this paper, a kind of limit cycle of an inverted pendulum system is discussed. We propose a stabilization control law for such a limit cycle of an inverted pendulum system that the pendulum rotates periodically. Besides, the stabilization control law is extended so as to ensure not only stability of the limit cycle but also an L$_2$-gain disturbance attenuation in the presence of modeling error and viscosity friction.

• Journal of Korean Society for Quality Management
• /
• v.49 no.4
• /
• pp.467-482
• /
• 2021

Purpose: The main theme of this study is to determine the optimal control limit of conditional variance investigation by mathematical approach. According to the determination approach of control limit presented in this study, it is possible with only one parameter to calculate the control limit necessary for budgeting control system or standard costing system, in which the limit could not be set in advance, that's why it has the advantage of high practical application. Methods: This study followed the analytical methodology in terms of the decision model of information economics, Bayesian probability theory and Taguchi's quality loss function concept. Results: The function suggested by this study is as follows; ${\delta}{\leq}\frac{3}{2}(k+1)+\frac{2}{\frac{3}{2}(k+1)+\sqrt{\{\frac{3}{2}(k+1)\}^2}+4$ Conclusion: The results of this study will be able to contribute not only in practice of variance investigation requiring in the standard costing and budgeting system, but also in all fields dealing with variance investigation differences, for example, intangible services quality control that are difficult to specify tolerances (control limit) unlike tangible product, and internal information system audits where materiality standards cannot be specified unlike external accounting audits.

• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.126-134
• /
• 2005

This paper proposes a selectively cumulative sum(S-CUSUM) control chart for detecting shifts in the process mean. The basic idea of the S-CUSUM chart is to accumulate previous samples selectively in order to increase the sensitivity. The S-CUSUM chart employs a threshold limit to determine whether to accumulate previous samples or not. Consecutive samples with control statistics out of the threshold limit are to be accumulated to calculate a standardized control statistic. If the control statistic falls within the threshold limit, only the next sample is to be used. During the whole sampling process, the S-CUSUM chart produces an 'out-of-control' signal either when any control statistic falls outside the control limit or when L -consecutive control statistics fall outside the threshold limit. The number L is a decision variable and is called a 'control length'. A Markov chain approach is employed to describe the S-CUSUM sampling process. Formulae for the steady state probabilities and the Average Run Length(ARL) during an in-control state are derived in closed forms. Some properties useful for designing statistical parameters are also derived and a statistical design procedure for the S-CUSUM chart is proposed. Comparative studies show that the proposed S-CUSUM chart is uniformly superior to the CUSUM chart or the Exponentially Weighted Moving Average(EWMA) chart with respect to the ARL performance.

• Steel and Composite Structures
• /
• v.22 no.6
• /
• pp.1391-1415
• /
• 2016

Limit load of pressure bearing structures was reviewed in this article. By means of the finite element analysis, limit load of pressurized cylinder with nozzle was taken as an example. Stress classification method and Elastic-plastic finite element analysis combining with limit load determination methods were used to determine limit load of cylinder with nozzle. Comparison of limit load determined by different methods, the results indicated that limit load determined by linearization method was the smallest. Limit load determined by twice elastic slope criterion was the nearest than experimental results. Elastic-plastic finite element analysis had comparably computational precision, but required time consuming. And then the requirements of computer processing and storage capacity by power system became higher and higher. Most of criteria for limit load estimation included any human factors based on a certain substantive characteristics of experimental results. The reasonable criterion should be objective and operational.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.3 no.1
• /
• pp.68-80
• /
• 1996

Long-term hemodialysis(HD) patients manifest various signs of protein and caloric malutrition due to poor intake of nutrients and other causes. Poor nutritional status increases the mortality and morbidity rates in HD patients. Thus, mataintnance of adequate nutritional status has been a major task in taking care of patients receiving HD. This study was to evaluate the nutritional status of HD patients and to clarify the degree of nutritional deficit based on usual dietary intake, anthropometric and biochemical indicators. Sixty HD patients comprised a HD group, while the control group consisted of 60 healthy adults whose age and sex matched those of the HD group. Nutritional status was evaluated by dietrary intake using instant nutritional scale, anthropometric measures, serum protein concentrations and the number of lymphocytes. The data were analyzed by using Chi-square test and unpaired t-test. The results are as follows. 1. Regarding usual dietary intake of HD group. 1) Estimated caloric intake was significantly lower than the recommended daily allowance(RDA) and among them, 35% were taking calories less than 85% of the RDA. 2) Estimated protein intake was significantly higher than the RDA and among them 40% were taking protein more than 115% of the RDA. 3) Estimated fat intake was lower than the RDA. 4) Vitamin A, B, $B_1,\;B_2$, C and niacin in take was lower than the RDA respectively. 5) Estimated ferrous intake was within the normal limit the RDA while estimated calcium intake was higher than the RDA. 6) Both calorie and protein intake were higher for the 10 patients who had been under continuous ambulatory peritoneal dialysis than for the patients under HD from the beginning. 2. Regarding anthropometric measures : 1) Body mass index(BMI), midarm circumference(MAC), and triceps skinfold thickness(TSF) were lower in the HD group than in the control group. 2) Among HD group, 47.1% were within the normal limit of BMI, while 86.7% were within the same limit in the control group. 3) Among HD group, 35.0% were within the normal limit of MAC, while 83.3% were within the same limit in the control group. 4) Among HD group, only 8.3% were normal, 30.3% were mild deficit status of TSF, while 50% were normal and 48.3% were mild deficit status in the control group. 3. Regarding biochemical laboratory tests 1) Albumin, transferrin concentrations and the number of lymphocytes were lower in HD group than in the control group. 2) Among HD group, 98.3% were within the normal limit of albumin concentration and all were within the same limit in the control group. 3) Among HD group, only 11.7% were within the normal limit of transferrin concentration, while 81.7% were within the same limit in the control group. 4) Among HD group, 25% were within the normal limit, while 93.3% were within the same limit in the control group. The above findings suggest that HD patients were in nutritional deficit status. Adequate diet therapy and periodical evaluation of the nutritional status in HD patients are needed. Accordingly, it turned out that anthropometric measures were very reliable parameters and easy to use to evaluate nutritional status. So nurses are encouraged to adopt anthropometric measures to examine nutritional deficit status of HD patients.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.6
• /
• pp.1881-1900
• /
• 2014

Since 802.11 wireless LANs are so widely used, it has become common for numerous access points (APs) to overlap in a region, where most of those APs are managed individually without any coordinated control. This pattern of wireless LAN usage is called the private OBSS (Overlapping Basic Service Set) environment in this paper. Due to frame collisions across BSSs, each BSS in the private OBSS environment suffers severe performance degradation. This study approaches the problem from the perspective of congestion control rather than noise or collision resolution. The retry limit, one of the 802.11 attributes, could be used for traffic control in conjunction with TCP. Reducing the retry limit causes early discard of a frame, and it has a similar effect of random early drops at a router, well known in the research area of congestion control. It makes the shared link less crowded with frames, and then the benefit of fewer collisions surpasses the penalty of less strict error recovery. As a result, the network-wide performance improves and so does the performance of each BSS eventually. Reducing the retry limit also has positive effects of merging TCP ACKs and reducing HOL-like blocking time at the AP. Extensive experiments have validated the idea that in the OBSS environment, reducing the retry limit provides better performance, which is contrary to the common wisdom. Since our strategy is basically to sacrifice error recovery for congestion control, it could yield side-effects in an environment where the cost of error recovery is high. Therefore, to be useful in general network and traffic environments, adaptability is required. To prove the feasibility of the adaptive scheme, a simple method to dynamically adjust the value of the retry limit has been proposed. Experiments have shown that this approach could provide comparable performance in unfriendly environments.