• International Journal of Control, Automation, and Systems
• /
• v.6 no.4
• /
• pp.596-606
• /
• 2008

In this paper, we present a co-design methodology of dynamic optimal network-bandwidth allocation (ONBA) and adaptive control for networked control systems (NCSs) to optimize overall control performance and reduce total network-bandwidth usage. The proposed dynamic co-design strategy integrates adaptive feedback control with real-time scheduling. As part of this co-design methodology, a "closed-loop" ONBA algorithm for NCSs with communication constraints is presented. Network-bandwidth is dynamically assigned to each control loop according to the quality of performance (QoP) information of each control loop. As another part of the co-design methodology, a network quality of service (QoS)-adaptive control design approach is also presented. The idea is based on calculating new control values with reference to the network QoS parameters such as time delays and packet losses measured online. Simulation results show that this co-design approach significantly improves overall control performance and utilizes less bandwidth compared to static strategies.

• Journal of Communications and Networks
• /
• v.12 no.6
• /
• pp.568-576
• /
• 2010

The paper presents a control architecture aimed at implementing bandwidth optimization combined with call admission control (CAC) over a digital video broadcasting (DVB) return channel satellite terminal (RCST) under quality of service (QoS) constraints. The approach can be applied in all cases where traffic flows, coming from a terrestrial portion of the network, are merged together within a single DVB flow, which is then forwarded over the satellite channel. The paper introduces the architecture of data and control plane of the RCST at layer 2. The data plane is composed of a set of traffic buffers served with a given bandwidth. The control plane proposed in this paper includes a layer 2 resource manager (L2RM), which is structured into decision makers (DM), one for each traffic buffer of the data plane. Each DM contains a virtual queue, which exactly duplicates the corresponding traffic buffer and performs the actions to compute the minimum bandwidth need to assure the QoS constraints. After computing the minimum bandwidth through a given algorithm (in this view the paper reports some schemes taken in the literature which may be applied), each DM communicates this bandwidth value to the L2RM, which allocates bandwidth to traffic buffers at the data plane. Real bandwidth allocations are driven by the information provided by the DMs. Bandwidth control is linked to a CAC scheme, which uses current bandwidth allocations and peak bandwidth of the call entering the network to decide admission. The performance evaluation is dedicated to show the efficiency of the proposed combined bandwidth allocation and CAC.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.83-93
• /
• 2003

Differentiated service networks, based on bandwidth broker, perform the control and management of QoS provisioning for the QoS guaranteed services, However, the centralized bandwidth broker model has a scalability problem since it has centralized resource management for the admission control function of all call attempts, Therefore, in this paper, we proposea novel adaptive admission control mechanism according to the attempted call status for enhancing the scalability under the centralized bandwidth broker model in IP differentiated service networks, The proposed mechanism decouples the function of admission control from the bandwidth broker, So, the ingress edge node performs the admission control and the bandwidth broker performs the resource management and QoS provisioning, We also introduce an edge-to-edge path concepts and the ingress edge node performs the admission control under the allocated bandwidth to eachpath. The allocated bandwidth per path adaptively varies according to the status of the attempted calls, This mechanism can significantly reduce the number of communication message between the bandwidth broker and each edge node in the network and increase the bandwidth utilization via adaptable resource allocation, In this paper we study the adaptive admission control operation and show the efficient and extensive improvement through the performance evaluation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.11
• /
• pp.943-954
• /
• 2000

Fieldbus is the lowest level industrial network in the communication hierarchy of factory automation and distributed process control systems. Data generated from field devices are largely divided into three categories : time-critical, periodic and time-available data. Because these data share one fieldbus medium, it needs a method that allocates these data to the bandwidth-limited fieldbus medium. This paper introduces an implementation method of bandwidth allocation scheme on PROFIBUS. In order to implement bandwidth allocation scheme on PROFIBUS, the following functions need to be supplemented on the FDL(Fieldbus Datalink Layer) protocol: (i) separation of medium bandwidth into periodic and non-periodic intervals, (ii) synchronization of node timers over a local link. In order to examine the validity of bandwidth allocation scheme on PROFIBUS, this paper develops an experimental model of a network system. The results obtained from the experimental model show that the bandwidth allocation scheme satisfies the performance requirement of time-critical, periodic and time-available data.

• Journal of Drive and Control
• /
• v.15 no.4
• /
• pp.1-10
• /
• 2018

Spool displacement of a direction control valve is the standard signal to measure the bandwidth frequency of the direction control valve. When the spool displacement signal is not available, it is suggested in this study to use the metering hydraulic line as an alternative way to measure - 90 degree phase bandwidth frequency of the hydraulic direction control valve. Dynamics of the hydraulic line is composed of inertia, capacitance, and friction effects. The effect of oil inertia is dominant in common hydraulic line dynamics and the line dynamics is close to a derivative action in a range of high frequency; such as a range of bandwidth frequency of common directional control valves. Phase difference between spool displacement and line load pressure is nearly constant as a valve close to 90 degree. If phase difference is compensated from the phase between valve input and pressure, compensated phase may be almost same as the phase of spool displacement that is a standard signal to measure phase bandwidth frequency of the directional control valve. A series of experiments were conducted to examine the possibility of using line pressure in to measure phase bandwidth frequency of a directional control valve. Phase bandwidth frequency could be measured with relatively high precision based on metering hydraulic line technique and it reveals consistent results even when valve input, oil temperature, and supply pressure change.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.209-212
• /
• 2005

The look-ahead preview control with the use of limited bandwidth active suspensions is presented. Both a linearized racked vehicle model and a complex nonlinear model based on a commercial multibody dynamic program are used to verify the performance of preview control. The performance of the preview control system is evaluated on the ride quality which is estimated from the acceleration of the driver position. Due to the practical advantages associated with the use of limited bandwidth active control in comparison with full bandwidth systems, the results are considered important to the future development of active tracked vehicle suspensions.

• Journal of Drive and Control
• /
• v.15 no.1
• /
• pp.1-9
• /
• 2018

The spool displacement of directional control valve can be considered as the standard signal to measure the bandwidth frequency of a directional control valve. When the spool displacement is not available, the metering-orifice system is implemented in this research as an alternative way of measuring the 90 degrees phase bandwidth frequency of the hydraulic directional control valve. The inertia effect on the transmission line oil induces the phase lead of the valve load pressure when compared with the phase of spool displacement. The capacitance effect of the oil induces the phase lag of the valve load pressure. The phase of the load pressure can be adjusted to be the same as that of the spool displacement by controlling the opening area of the metering orifice. A series of experiments were conducted to verify the effectiveness of the metering orifice. The 90 degrees phase bandwidth frequency measured from the valve load pressure was significantly deviated in some cases from the frequency of the spool displacement. The metering orifice was hard to be applied to measure the -90 degrees phase bandwidth frequency of the high precision.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.638-651
• /
• 2000

When the bandwidth resources in a packet-switched network are shared among sessions by MAX-MIN flow control each session is required to transmit its data into the network subject to the MAX-MIN fair rate which is solely determined by network loadings. This passive behavior of sessions if fact can cause seri-ous QoS(Quality of Service) degradation particularly for real-time multimedia sessions such as video since the rate allocated by the network can mismatch with what is demanded by each session for its QoS. In order to alleviate this problem we extend the concept of MAX-MIN fair bandwidth allocations as follows: Individual bandwidth demands are guaranteed if the network can accommodate them and only the residual network band-width is shared in the MAX-MIN fair sense. On the other hand if sum of the individual bandwidth demands exceeds the network capacity the shortage of the bandwidth is shared by all the sessions by reducing each bandwidth guarantee by the MAX-MIN fair division of the shortage. we present a novel flow control algorithm to achieve this extended MAX-MIN fairness and show that this algorithm can be implemented by the existing ATM ABR service protocol with minor changes. We not only analyze the steady state asymptotic stability and convergence rate of the algorithm by appealing to control theories but also verify its practical performance through simulations in a variety of network scenarios.

• Transactions on Control, Automation and Systems Engineering
• /
• v.1 no.2
• /
• pp.94-98
• /
• 1999

Optical scanning systems use glavanometers to point the laser beam to the desired position on the workpiece. The angular speed of a galvanometer is typically controlled using Proportional+Integral+Derivative(PID) control algorithms. However, natural variations in the dynamics of different galvanometers due to manufacturing, aging, and environmental factors(i.e., process uncertainty) impose a hard limit on the bandwidth of the galvanometer control system. In general, the control bandwidth translates directly into efficiency of the system response. Since the optical scanning system must have rapid response, the higher control bandwidth is required. Auto-tuning PID algorithms have been accepted in this area since they could overcome some of the problems related to process uncertainty. However, when the galvanometer is attached to a larger mechanical system, the combined dynamics often exhibit resonances. It is well understood that PId algorithms may not have the capacity to increase the control bandwidth in the face of such resonances. This paper compares the achieable performance and robustness of a galvanometer control system using a PID controller tuned by the Ziegler-Nichols method and a controller designed by the Quantitative Feedback Theory(QFT) method. The results clearly indicate that-in contrast to PID designs-QFT can deliver a single, fixed controller which will supply high bandwidth design even when the dynamics is uncertain and includes mechanical resonances.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.11
• /
• pp.1144-1155
• /
• 2006

Digital communication networks have become a core technology in advanced building automation systems. BACnet(Building Automation and Control networks) is a standard data communication protocol designed specifically for building automation and control systems. BACnet adopts Master-Slave/Token-Passing(MS/TP) protocol as one of its field level networks. In this study, we introduce a method of implementing a bandwidth allocation scheme in the MS/TP protocol. The bandwidth allocation scheme improves the capability of real-time communication of the original MS/TP protocol. The bandwidth allocation scheme introduced in this paper can be easily implemented in the existing MS/TP protocol with a slight modification. In this study, we actually developed the hardware and firmware of the modified MS/TP communication module in which the bandwidth allocation scheme is implemented. Using the modified MS/TP communication module, we developed an experimental model in order to examine the validity of the bandwidth allocation scheme in the MS/TP protocol. Experimental results show that the modified MS/TP protocol satisfies the requirements of real time communication for periodic and urgent messages of BACnet communication services.