• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.859-862
• /
• 2002

The Core Support Barrel (CSB) is a major component of Reactor Internals, and is designed to support and protect the Reactor Core. In this study, Reactor Core, Core Shroud and CSB were simplified to coaxial cylinders and then the offset of Reactor Core & Core Shroud to the dynamic characteristic of CSB was analyzed. For the beam modes, natural frequencies of the cantilevered cylinder are compared with those of the cantilevered beam. And it was found out that shear modulus must be used correctly to convert the shell model to the equivalent beam model. From the dynamic characteristics of the beam model, it was found out that natural frequencies are proportional to the length of Reactor Core & Core Shroud and inversely proportional to the mass. From the comparison with the dynamic characteristics of a beam model and a lumped-mass model it was found out that the size of lumped-mass must be determined considering both the length and the mass of Reactor Core & Core Shroud.

• The Korean Journal of Emergency Medical Services
• /
• v.14 no.2
• /
• pp.25-40
• /
• 2010

Purpose : The purpose of this study was to develop and apply a Core Skill-TLP(Core Skill-Tutorial, Laboratory, Practicum) package in Patient Management and to effect of core skill-TLP education. Methods : This study was used to developed Patient Management' Core Skill-TLP package throughout 14 steps of Core Skill-TLP package development model. Then, Core Skill-TLP Learning methodology was implemented in first year student in the undergraduate emergency medical technology, and survey was done. Results : 1. Core Skill-TLP package model was presented based on conceptual model of PBL(S-PBL). 2, The student in OSCE did significantly better in clinical patient management core skills performance. 3. As to the satisfaction of Core Skill-TLP package management, student, tutor and self-satisfaction score was 3.21, 3.42, 3.38 respectively. Conclusion : This study was suggested that Core Skill-TLP education would be necessary with well-structured package and achieved advantage of simulation and PBL.

• Advances in aircraft and spacecraft science
• /
• v.9 no.5
• /
• pp.377-400
• /
• 2022

The aim of this work is a numerical comparison (FEM) between lattice pyramidal-core panel and honeycomb core panel for different core thicknesses. By evaluating the mid-span deflection, the shear rigidity and the shear modulus for both core types and different core thicknesses, it is possible to define which core type has got the best mechanical behaviour for each thickness and the evolution of that behaviour as far as the thickness increases. Since a specific base geometry has been used for the lattice pyramidal core, the comparison gives us the opportunity to investigate the unit cell strut angle giving the higher mechanical properties. The presented work considers a detailed FEM modelling of a standard 3-point bending test (ASTM C393/C393M Standard Practice). Detailed FEM modelling addresses to detailed discretization of cores by means of beam elements for lattice core and shell elements for honeycomb core. Facings, instead, have been modelled by using shell elements for both sandwich panels. On lattice core structure, elements of core and facings are directly connected, to better simulate the additive manufacturing process. Otherwise, an MPC-based constraint between facings and core has been used for honeycomb core structure. Both sandwich panels are entirely built of Aluminium alloy. Prior to compare the two models, the FEM sandwich panel model with lattice pyramidal core needs to be validated with 3-point bending test experimental results, in order to ensure a good reliability of the FEM approach and of the comparison. Furthermore, the analytical validation has been performed according to Allen's theory. The FEM analysis is linear static with an increasing midspan load ranging from 50N up to 500N.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.90-95
• /
• 2000

In the Ordered Core Based Tree(OCBT) protocol, a core location is the most important feature to affect the performance. In this paper, the location placement of multiple level cores is studied. The proposed algorithm isthat each node in the network evaluates a sum of shortest path costs from all the other nodes and the entirenetwork is divided into a hierarchy region to have 3-logical level(Small, Medium, Large). The node to have thelowest cost in each S-Region is decided to be a core node. Then, the core nodes in the each S-Region evaluatea sum of shortest path costs from all the other core nodes in the same M-Region. The core node to have thelowest cost is decided to be the upper level core node. Similarly the highest level core node is decided in theL-Region. The proposed algoritthm is compared with conventional two methods to put the core nodes in thenetwork One is the random method to put the core nodes randomly. The other is the center method to locatethe core node at the nearest node from the center of each S-Region and then to locate the highest level corenode at the nearest core node from the center of the entire network. Extensive simulations are performed in theview of mean tree cost and join latency. Simulation results show that the proposed algorithm has betterperformance than random method or center method.

• Journal of Adhesion and Interface
• /
• v.11 no.3
• /
• pp.112-119
• /
• 2010

Poly(methyl methacrylate)/poly(butyl acrylate) PMMA/PBA core-shell composite particles were prepared by the emulsion polymerization of MMA and BA in the presence of different concentration of sodium dodecyl benzene sulfonate (SDBS). The following conclusions are drawn from the measured conversion and particle size distribution, morphology, average molecular weight distribution, observation of film formation and particle formation, glass transition temperature and physical properties of polymerized core-shell composition particles for using adhesive binder. When the concentration of 0.03 wt% surfactant, the conversions of PMMA and PBA core polymerization are excellent as 95.8% for PMMA core and 92.3% for PBA core. Core-shell composite particles are obtained 90.0% for PMMA/PBA core-shell composite particles and 89.0% for PMMA/PBA core-shell composite particles. It is considered that the core and shell particles are polymerized to be confirmed FT-IR spectra and average molecular weight measured with a GPC, formation of the composite particles is confirmed by the film formation from normal temperature, and composition of inside and outside of the composite particle is confirmed by TEM photograph. The synthesized polymer has two glass transition temperatures, suggesting that the polymer is composed of core polymer and shell polymer unlike general copolymers. It is considered that each core-shell composite particle can be used as a high functionality adhesion binder by the measurement of tensile strength and elongation.

• Steel and Composite Structures
• /
• v.45 no.3
• /
• pp.467-482
• /
• 2022

One of the major failure modes in composite sandwich structures is the separation between skins and core. In this study, the effect of employing foam filled composite corrugated core on the skin/core debonding (resistance to separation between skin and core) is investigated both experimentally and numerically. To this aim, triangular corrugated core specimens are manufactured and compared with reference specimens only made of PVC foam core in terms of skin/core debonding under bending loading. The corrugated composite laminates are fabricated using the hand layup method. Also, the Vacuumed Infusion Process (VIP) is employed to join the skins to the core with greater quality. Utilizing an End Notched Shear (ENS) fixture, three point bending tests are performed on the manufactured sandwich composite panels. The results reveal that the resistance to separation capacity and flexural stiffness of sandwich composite has been increased about 170% and 76%, respectively by using a triangular corrugated core. The Cohesive Zone Model (CZM) with appropriate cohesive law in ABAQUS finite element software is used to model the progressive face/core interfaces debonding the difference between experimental and numerical results in predicting the maximum born load before the skin/core separation is about 6 % in simple core specimens and 3% in triangular corrugated core specimens.

• BMB Reports
• /
• v.31 no.3
• /
• pp.281-286
• /
• 1998

Hepatitis C virus (HCV) core proteins from two different isolates (HCV-1 and HCV-RH) were expressed in Spotioptera Jrugiperda (Sf9) insect cells. The RH core consisted of two major species of proteins (21 kDa and 19 kDa). On the other hand, the HCV-1 core was approximately 16 kDa in a SDS-PAGE gel. Both core proteins were phosphorylated in vivo on serine residues. Furthermore, the RH core but not HCV-1 core formed dimers, indicating that the protein conformation of the core in these two isolates is dfferent from one another. Immunofluorescence studies showed that the RH core was present in the cytoplasm, whereas the HCV-1 core was localized predominantly to the nucleus in recombinant baculovirus-infected insect cells. Since the major difference between the two isolates is the codon 9 of the core protein, a single amino acid substitution appears to play a major role in the protein conformation and these properties may reflect the different biological functions of core proteins in HCV-infected cells.

• Nuclear Engineering and Technology
• /
• v.36 no.6
• /
• pp.528-539
• /
• 2004

It is essential in commercial reactors that the safety limits imposed on the fuel pellets and fuel clad barriers, such as the linear power density (LPD) and the departure from nucleate boiling ratio (DNBR), are not violated during reactor operations. In order to accurately monitor the safety limits of current reactor states, a detailed three-dimensional (3D) core power distribution should be estimated from the in-core detector signals. In this paper, we propose a calculation methodology for detailed 3D core power distribution, using in-core detector signals and core monitoring constants such as the 3D Coupling Coefficients (3DCC), node power fraction, and pin-to-node factors. Also, the calculation method for several core safety parameters is introduced. The core monitoring constants for the real core state are promptly provided by the core design code and on-line MASTER (Multi-purpose Analyzer for Static and Transient Effects of Reactors), coupled with the core monitoring program. through the plant computer, core state variables, which include reactor thermal power, control rod bank position, boron concentration, inlet moderator temperature, and flow rate, are supplied as input data for MASTER. MASTER performs the core calculation based on the neutron balance equation and generates several core monitoring constants corresponding to the real core state in addition to the expected core power distribution. The accuracy of the developed method is verified through a comparison with the current CECOR method. Because in all the verification calculation cases the proposed method shows a more conservative value than the best estimated value and a less conservative one than the current CECOR and COLSS methods, it is also confirmed that this method secures a greater operating margin through the simulation of the YGN-3 Cycle-1 core from the viewpoint of the power peaking factor for the LPD and the pseudo hot pin axial power distribution for the DNBR calculation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.587-590
• /
• 2000

The new core making method economized on core sand requested. The new method is heating core box until it reaches reasonable temperature and then spraying core sand with core binder into core box. Inner temperature distribution have to uniform in order to form core of uniform thickness. Therefore, in this study we treat of inner temperature distribution of core box in priority. First, determine proper torch number. Next, optimize the torch position to minimize the average of absolute deviation(AVEDEV) of inner temperature. The results are as followed : 1. The torch number that makes inner temperature distribution about $300^\circ{C}$ uniformly is 25. 2. When $S_H$ and $S_V$ is 0.7, the torch position is optimized and AVEDEV is 5.85.

• Journal of Korea Foundry Society
• /
• v.17 no.4
• /
• pp.402-410
• /
• 1997

Developing a salt core for squeeze casting process, two different salt cores(pure salt core and mixed salt core) were fabricated and investigated. Pure salt core was composed of 100% NaCl and mixed salt core was made by mixtures of NaCl with MgO(1%), $Na_2B_4O_7$(2%), and talc(1%) as a binder or a strengthening agent. Salt cores were compacted to various theoretical density, heat treated, and then squeeze-cast with molten Al alloy(AC8A). The compression strength of salt cores were measured and the squeeze-cast products were examined for shape retention, infiltration of molten metal into the cores, and microstructures. The shape of salt core compacted at above 75% of the theoretical density was maintained stably. The higher theoretical density of salt cores gave higher compression strength, and the compression strength of mixed salt core was higher than that of pure salt core. Namely at 90% theoretical density, the compression strength of mixed salt core was $6.3 kg/mm^2$, compared to $4.6 kgmm^2$ for pure salt core. At a squeeze casting pressure of $1000 kg/cm^2$, molten Al alloy was infiltrated into pure salt core of under 85% of the theoretical density. At squeeze casting pressure of $1000 kg/cm^2$, only mixed salt core above 90% of the theoretical density were valid, but the shape of the core was altered in the case of pure salt core at 90% of theoretical density. A key factor for developing a salt core for squeeze casting process was estimated as the ultimate compressive strength of salt core.