• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.3
• /
• pp.115-121
• /
• 2021

PURPOSE: This study analyzed the correlation between the plantar pressure and body alignment according to the dominant hand of elementary school baseball players. METHODS: The subjects consisted of 32 elementary school baseball players. The 32 players were classified in the right-hand dominant group (Rt. Group, n = 22) and left-hand dominant group (Lt. group, n = 10). The plantar pressure was measured using a pedoscan to determine the maximum pressure and pressure distribution. The body alignment was measured using a fometric 4D to measure the trunk imbalance angle (TI), pelvic tilt angle (PTi), pelvic torsion angle (PTo), pelvis rotation angle (PR), kyphotic angle (Ky), lordotic angle (Lo), and trunk torsion angle (TT). RESULTS: Participants showed correlations in the Rt. group, according to the left maximum pressure, Lo (r = .592, p < .05), and TT (r = .514, p < .05); according to the right maximum pressure, PR (r = .539, p < .05), and Lo (r = .503, p < .05). In the left pressure distribution, the PR (r = -.521, p < .05) showed a negative correlation. In the Lt. group, the PT (r = -.591, p < .05) showed a negative correlation in the left pressure distribution. CONCLUSION: These results can be used as basic data for a body analysis study of elementary school baseball players in the future.

• Journal of Sensor Science and Technology
• /
• v.17 no.3
• /
• pp.210-216
• /
• 2008

The propose of this study is evaluating which correlation of foot pressure distribution and scoliosis that happen by walking to 20'th Mens that have not experienced a scoliosis. The propose of this study is evaluating which correlation of foot pressure distribution and scoliosis that happen by walking to 20'th Mens that have not experienced a scoliosis. Measurement and analysis of Foot Pressure was executed by using by F-scan System. Degree of scoliosis was expressed as a angle used x-ray image of 5-lumbar from 4-thoracic vertebra The correlation between result of foot pressure and degree of scoliosis was evaluated under 0.05 interrelationship, and variables used for analysis were showed high correlation.

• Journal of Mechanical Science and Technology
• /
• v.18 no.9
• /
• pp.1630-1639
• /
• 2004

The present paper investigated the correlation between the acoustic pressure variations and the augmentation of heat transfer in the ultrasonic induced acoustic fields. The augmentation ratios of heat transfer coefficient were experimentally measured and were compared with the profile of the pressure distribution in the acoustic fields predicted by numerical analysis. For numerical analysis, a coupled finite element-boundary element method (coupled FE-BEM) was applied. The results of the present study reveal that the acoustic pressure is higher near two ultrasonic transducers than other points where no ultrasonic transducer was installed. The augmentation trend of heat transfer is similar with the profile of the acoustic pressure distribution. In other words, as the acoustic pressure increases, the higher augmentation ratio of heat transfer is obtained. Numerical and experimental studies clearly show that the acoustic pressure variations are closely related to the augmentation of heat transfer in the acoustic fields.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.2 no.1
• /
• pp.115-125
• /
• 2007

Objectives : The limited number of studies to date have mainly focused on the effect of obesity on the characteristics of plantar foot pressures. This study is designed to find the correlation between plantar pressure and obese index. Methods : This study assessed the body composition of 30 obese women using bioelectrical impidence analysis and Gaitview AFA-50. The static and dynamic plantar pressure was determined from electronic footprints captured using a capacitive pressure distribution platform during standing and walking. The data were analysed by independent t-test and Pearson Correlation. Results : Positive correlations were noted between body weight, body mass index(BMI), waist circumference(WC), waist-hip ratio(WHR) and difference of fore and rear plantar pressure. And negative correlations were noted between body weight, BMI, WC, WHR and difference of left and right plantar pressure. Conclusions : The findings of this pilot study suggest that body composition influences the waight distribution in overweight and obese subjects.

• Journal of Advanced Research in Ocean Engineering
• /
• v.4 no.4
• /
• pp.185-194
• /
• 2018

In this study, the extreme sloshing pressure was predicted using various statistical models: three-parameter Weibull distribution, generalized Pareto distribution, generalized extreme value distribution, and three-parameter log-logistic distribution. The estimation of sloshing impact pressure is important in design of liquid cargo tank in severe sea state. In order to get the extreme values of local impact pressures, a lot of model tests have been carried out and statistical analysis has been performed. Three-parameter Weibull distribution and generalized Pareto distribution are widely used as the statistical analysis method in sloshing phenomenon, but generalized extreme value distribution and three-parameter log-logistic distribution are added in this study. Additionally, statistical distributions are fitted to peak pressure data using three different parameter estimation methods. The data were obtained from a three-dimensional sloshing model text conducted at Seoul National University. The loading conditions were 20%, 50%, and 95% of tank height, and the analysis was performed based on the measured impact pressure on four significant panels with large sloshing impacts. These fittings were compared by observing probability of exceedance diagrams and probability plot correlation coefficient test for goodness-of-fit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.224-229
• /
• 2019

This study was undertaken to provide correct posture guidance and reference material for sports injury and injury prevention programs, by analyzing body alignment and plantar pressure distribution in high school baseball players. Totally, 32 subjects were enrolled for the study. Body alignment was measured from the trunk imbalance, kyphotic angle, lordotic angle, pelvic tilt, and pelvic torsion. Foot pressure was measured from the left maximum pressure, right maximum pressure, left weight, and right weight. The mean and standard deviation of the measured factors were calculated and tabulated, and the correlation between body alignment and foot pressure distribution was analyzed using Pearson's correlation analysis. All statistical significance levels were set at 0.05. Body alignment and foot pressure distribution show a positive correlation between the lordotic angle of lumbar spine and the left maximum pressure. There was no correlation between trunk imbalance, kyphotic angle, lordotic angle, pelvic tilt, pelvic torsion, and the left·right weight distribution and the left·right maximum pressure of each foot. Results of this study determined that the increase of the lordotic angle of lumbar spine results in more force on one side of the foot, thereby increasing the maximum pressure. We believe our data could be a reference for exercise programs on physical alignment and plantar pressure distribution of athletes.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.297-301
• /
• 2008

The flight vehicles have cavities such as wheel wells and bomb bays. The flow around a cavity is characterized as unsteady flow because of the formation and dissipation of vortices due to the interaction between the freestream shear layer and cavity internal flow, the generation of shock and expansion waves. Resonance phenomena can damage the structures around the cavity and negatively affect aerodynamic performance and stability. The flow field is observed to oscillate in the "shear layer mode" with low aspect ratio. In the present study, numerical analysis was performed for cavity flows by the unsteady compressible three dimensional Reynolds-Averaged Navier-Stokes (RANS) equations with Wilcox's $\kappa$-$\omega$ turbulence model. The flow field is observed to oscillate in the shear layer mode" with large aspect ratio. Based on the SPL(Sound Pressure Level) analysis of the pressure variation at the cavity trailing edge, the dominant frequency was analyzed and compared with the results of Rossiter's formul. The aero-acoustic wave analyzed with CPD(Correlation of Pressure Distribution).

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.297-301
• /
• 2008

The flight vehicles have cavities such as wheel wells and bomb bays. The flow around a cavity is characterized as unsteady flow because of the formation and dissipation of vortices due to the interaction between the freestream shear layer and cavity internal flow, the generation of shock and expansion waves. Resonance phenomena can damage the structures around the cavity and negatively affect aerodynamic performance and stability. The flow field is observed to oscillate in the "shear layer mode" with low aspect ratio. In the present study, numerical analysis was performed for cavity flows by the unsteady compressible three dimensional Reynolds-Averaged Navier-Stokes (RANS) equations with Wilcox's ${\kappa}-{\varepsilon}$ turbulence model. The flow field is observed to oscillate in the "shear layer mode" with large aspect ratio. Based on the SPL(Sound Pressure Level) analysis of the pressure variation at the cavity trailing edge, the dominant frequency was analyzed and compared with the results of Rossiter's formul. The aero-acoustic wave analyzed with CPD(Correlation of Pressure Distribution).

• International Journal of Automotive Technology
• /
• v.2 no.1
• /
• pp.25-31
• /
• 2001

It is necessary to understand the combustion process and cycle-by-cycle variation in combustion to improve the engine stability and consequently to improve the fuel economy and exhaust emissions. The pressure related parameters instead of mass fraction burned were compared for the effect of initial combustion pressures on the following combustion and the analysis of cycle-by-cycle variation in combustion for two pen injected SI engines. The correlation between IMEP and pressures at referenced crank angles showed almost the same trends for equivalence ratios, but the different mixture preparations indicated different tendency. The dependency of IMEP on pressure at the referenced crank angles increases as the mixture becomes leaner for both engines. The mixture distribution in the combustion chamber was varied with the coolant temperature and intake valve deactivation due to the evaporation of fuel and air motion. The correlation between pressure related parameters were also compared for the coolant temperatures and air motion.

• Journal of Korea Water Resources Association
• /
• v.54 no.spc1
• /
• pp.1155-1166
• /
• 2021

In this study, statistical analysis was performed to suggest the optimal analysis techniques for the main measuring instruments of the fill dam, such as seepage, crest settlement, and porewater pressure gauge. In addition, correlation analysis with water level and rainfall data was performed. Based on the results of descriptive statistical analysis for each instrument, porewater pressure gauges could be classified into 3 groups or 2 groups through principal component analysis, In the case of the group having a high correlation with the water level instrument, the correlation between the gauges was also large. In the case of seepage instrument, the distribution showed an extremely asymmetric distribution, so for quantitative analysis, the average seepage during non-precipitation and precipitation could be estimated through decision tree analysis. In the case of the crest settlement instrument, the correlation analysis showed that the correlation between the gauges was large, but the relationship with the water level instrument did not show a significant linear relationship, so EMD analysis was performed to analyze it in more detail. It is judged that principal component analysis, decision tree analysis, and data filtering method can be applied to analyze the behavior of pore water pressure meters, seepage, and crest settlement instrument as major measurement items of fill dam.