• East Asian mathematical journal
• /
• v.32 no.5
• /
• pp.641-649
• /
• 2016

In this paper, using three types of conjugations in a bicomplex number filed $\mathcal{T}$, we provide some basic definitions of bicomplex number and definitions of regular functions for each differential operators. And we investigate the corresponding Cauchy-Riemann systems and the corresponding Cauchy theorems in $\mathcal{T}$ in Clifford analysis.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.4
• /
• pp.701-715
• /
• 2011

The object of study is what kinds of contents are preferable depending on regions and terminal types for high speed mobile internet. We consider 10 contents, 9 region2, and 2 terminal types. The methods are the adjusted residuals, the corresponding analysis, and the multiple corresponding analysis. The results are different, which comes from different mathematical models. 50% of results are same between the corresponding analysis and the multiple corresponding analysis. 26.3% are same between the adjusted residuals and the corresponding analysis. 21.1% are same between the adjusted residuals and the multiple corresponding analysis. We recommend the adjusted residuals because it can test hypothesis for preferring contents. The content which is not chosen by three methods is business.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.440-440
• /
• 2000

In general, camera calibration is consisted of Indoor and Outdoor system. In case of Indoor system, it was optimized experimental condition. However, Outdoor system is different camera parameters for each image that is compared to equaled position. That is, it imply that camera parameters are varied by an environment with light or impulse noise, etc. So we make use of Image sequence because that they provide the more information for each image. In addition to, we use Corresponding line because it has less error than Corresponding point. Corresponding line has also the more information. In this paper, we suggest on-line camera calibration method using the time-varying Image sequence and Corresponding line. So we calculate camera parameters with intrinsic and extrinsic parameters in On-line system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.4 s.316
• /
• pp.44-50
• /
• 2007

In this paper, we proposed the algorithm for the extraction of the corresponding points from images. The proposed algorithm EMSAC is based on RANSAC and EM algorithms. In the RANSAC procedure, the N corresponding points are randomly selected from the observed total corresponding points to estimate the homography matrix, H. This procedure continues on its repetition until the optimum H are estimated within number of repetition maximum. Therefore, it takes much time and does not converge sometimes. To overcome the drawbacks, the EM algorithm was used for the selection of N corresponding points. The EM algorithm extracts the corresponding points with the highest probability density to estimate the optimum H. By the experiments, it is demonstrated that the proposed method has exact and fast performance on extraction of corresponding points by combining RANSAC with EM.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.3
• /
• pp.321-332
• /
• 1998

The purpose of this study is to provide basic data for more functional and more fitting clothing construction. The subjects were college women aged from 18 to 25 in June, 1997. Data were collected by anthropometry and photometry and analyzed by the characteristic of the upper body- The results are as follows: 1. After analyzing direct anthropometric data, 1 have analyzed the data by the characteristic in each somatotype, classified them and I have had 5 groups. Group 1 with middle height and standard type, group 2 with great height and standard type, group 3 with low height and slim type, group 4 with middle height and fat type, and group 5 with low height and a little fat type. 2. After analyzing indirect photometric data, 1 have analyzed them by the characteristic and I have had 4 groups. Group 1 with lean back type, group 2 with sway back type, group 3 with straight type and group 4 with bend forward type. 3. Through the mutual corresponding relation in the 5 groups classified with direct anthropometric measurement and the 4 groups classified with indirect photometric mea- surement, direct-group 1 comes the most corresponding to indirect-group 2, comes second to indirect-group 4, and comes third to indirect-group 1. Direct-group 2 comes the most corresponding to indirect-group 4, direct-group 3 comes the most corresponding to indirect- group 1, direct-group 4 comes the most corresponding to indirect-group 3, and direct-group 5 comes the most corresponding to indirect-group 1.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.10
• /
• pp.881-888
• /
• 1994

The approximate rates and stoichiometry of the reaction of excess sodium tris(diethylamino)aluminum hydride (ST-DEA) with selected organic compounds containing representative functional groups under standardized conditions(tetrahydrofuran, $0{\circ}$) were studied in order to characterize the reducing characteristics of the reagent for selective reductions. The reducing ability of STDEA was also compared with those of the parent sodium aluminum hydride (SAH) and lithium tris(diethylamino)aluminum hydride (LTDEA). The reagent appears to be milder than LTDEA. Nevertheless, the reducing action of STDEA is very similar to that observed previously for LTDEA, as is the case of the corresponding parent sodium and lithium aluminum hydrides. STDEA shows a unique reducing characteristics. Thus, benzyl alcohol, phenol and 1-hexanol evolved hydrogen slowly, whereas 3-hexanol and 3-ethyl-3-pentanol, secondary and tertiary alcohols, were essentially inert to STDEA. Primary amine, such as n-hexylamine, evolved only 1 equivalent of hydrogen slowly. On the other hand, thiols examined were absolutely stable. STDEA reduced aidehydes and ketones rapidly to the corresponding alcohols. The stereoselectivity in the reduction of cyclic ketones by STDEA was similar to that by LTDEA. Quinones, such as p-benzoquinone and anthraquinone, were reduced to the corresponding 1,4-dihydroxycyclohexadienes without evolution of hydrogen. Carboxylic acids and anhydrides were reduced very slowly, whereas acid chlorides were reduced to the corresponding alcohols readily. Esters and epoxides were also reduced readily. Primary carboxamides consumed hydrides for reduction slowly with concurrent hydrogen evolution, but tertiary amides were readily reduced to the corresponding tertiary amines. The rate of reduction of aromatic nitriles was much faster than that of aliphatic nitriles. Nitrogen compounds examined were also reduced slowly. Finally, disulfide, sulfoxide, sulfone, and cyclohexyl tosylate were readily reduced without evolution of hydrogen. In addition to that, the reagent appears to be an excellent partial reducing agent: like LTDEA, STDEA converted ester and primary carboxamides to the corresponding aldehydes in good yields. Furthermore, the reagent reduced aromatic nitriles to the corresponding aldehydes chemoselectively in the presence of aliphatic nitriles. Consequently, STDEA can replace LTDEA effectively, with a higher selectivity, in most organic reductions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.5
• /
• pp.355-369
• /
• 2018

LiDAR (Light Detection And Ranging) strip adjustment is process to improve geo-referencing of the ALS (Airborne Laser Scanner) strips that leads to seamless LiDAR data. Multiple strips are required to collect data over the large areas, thus the strips are overlapped in order to ensure data continuity. The LSA (LiDAR Strip Adjustment) consists of identifying corresponding features and minimizing discrepancies in the overlapping strips. The corresponding features are utilized as control features to estimate transformation parameters. This paper applied SURF (Speeded Up Robust Feature) to identify corresponding features. To improve determination of the corresponding feature, false matching points were removed by applying three schemes: (1) minimizing distance of the SURF feature vectors, (2) selecting reliable matching feature with high cross-correlation, and (3) reflecting geometric characteristics of the matching pattern. In the strip adjustment procedure, corresponding points having large residuals were removed iteratively that could achieve improvement of accuracy of the LSA eventually. Only a few iterations were required to reach reasonably high accuracy. The experiments with simulated and real data show that the proposed method is practical and effective to airborne LSA. At least 80 % accuracy improvement was achieved in terms of RMSE (Root Mean Square Error) after applying the proposed schemes.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.47-49
• /
• 2009

In this paper, we proposed a new algorithm for determination of many-to-many corresponding pairs between block-polygon sets from the national topographical map and the cadastral map in Korea Land Information System, caused by different abstraction and generalization rules of the two maps. Our proposed algorithm starts from an assumption that a block-polygon for a N:M pair should significantly overlap at least one block polygon of the counterpart group, and determines N:M pairs using an iterative updating and searching with this overlapping analysis. This iteration process is terminated when the N:M corresponding pairs satisfy our predefined 1:1 corresponding condition.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.10
• /
• pp.569-574
• /
• 2003

Computer vision system is broadly adapted like as autonomous vehicle system, product line inspection, etc., because it has merits which can deal with environment flexibly. However, for applying it for that industry, it has to clear the problem that recognize position parameter of itself. So that computer vision system stands in need of camera calibration to solve that. Camera calibration consists of the intrinsic parameter which describe electrical and optical characteristics and the extrinsic parameter which express the pose and the position of camera. And these parameters have to be reorganized as the environment changes. In traditional methods, however, camera calibration was achieved at off-line condition so that estimation of parameters is in need again. In this paper, we propose a method to the calibration of camera using line correspondence in image sequence varied environment. This method complements the corresponding errors of the point corresponding method statistically by the extraction of line. The line corresponding method is strong by varying environment. Experimental results show that the error of parameter estimated is within 1% and those is effective.

• Asian Spine Journal
• /
• v.12 no.6
• /
• pp.1123-1126
• /
• 2018

Study Design: Observational study. Purpose: To assess the correlational accuracy between the traditional anatomic landmarks of the neck and their corresponding vertebral levels in Southern Chinese patients. Overview of Literature: Recent studies have demonstrated discrepancies between traditional anatomic landmarks of the neck and their corresponding cervical vertebra. Methods: The center of the body of the hyoid bone, the upper limit of the lamina of the thyroid cartilage, and the lower limit of the cricoid cartilage were selected as representative surface landmarks for this investigation. The corresponding vertebral levels in 78 patients were assessed using computed tomography. Results: In both male and female patients, almost none of the anatomical landmarks demonstrated greater than 50% correlation with any vertebral level. The most commonly corresponding vertebra of the hyoid bone, the lamina of the thyroid cartilage, and the cricoid cartilage were the C4 (47.5%), C5 (35.9%), and C7 (42.3%), respectively, which were all different from the classic descriptions in textbooks. The vertebral levels corresponding with the thyroid and cricoid cartilage were significantly different between genders. Conclusions: The surface landmarks of the neck were not accurate enough to be used as the sole determinant of vertebral levels or incision sites. Intra-operative fluoroscopy is necessary to accurately locate each of the cervical vertebral levels.