• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.442-446
• /
• 2004

Reducing the particle size of drug materials down to submicron is an important matter in pharmaceutical industry. Cryogenic milling technology is one of the mechanical milling processes, which is mostly utilized in refining grain size of metal and ceramics at extremely low temperature environment. This technique has not been readily studied in application to medical and biotechnology. This paper, therefore, describes the application of cryogenic milling process to reduce particle size of Ibuprofen. The shape and size of the Ibuprofen particle before and after the cryogenic ball milling process were analyzed. XRD analysis was performed to examine a change in crystallinity of Ibuprofen by the cryogenic ball milling process. The results showed that the size of Ibuprofen particles was reduced to 1/10 or less of its initial size. The results also showed that the degree of crystallinity of Ibuprofen was slightly reduced after cryogenic ball milling with nitrogen

• 한국정밀공학회지
• /
• 제27권7호
• /
• pp.49-54
• /
• 2010

The cryogenic ball milling was performed on carbon nanotubes (CNTs) at an extremely low temperature to increase the dispersion of CNTs. The effects of milling speed and time on the deagglomeration and structural changes of CNTs were studied. FESEM was used to analyze the dispersion and the change of particle size before and after milling process. Transmission electron microscopic (TEM) analysis was also investigated the effect of cryogenic ball milling on the morphological characteristics of CNTs. The structural changes by the cryogenic ball milling process were further confirmed by x-ray diffraction (XRD) and Raman spectroscopic analysis. The results showed that the agglomeration of CNTs was significantly reduced and amorphous structure was observed at high milling speed. However, the milling time has no great effect on the dispersion property and structural change of CNTs compared with milling speed.

• 한국정밀공학회지
• /
• 제21권11호
• /
• pp.195-199
• /
• 2004

For the present study, the cryogenic ball milling process was applied to make Ibuprofen microsized. The cryogenic ball milling was performed at low temperature of about -18$0^{\circ}C$ for 6 hours. The particle size distribution was determined before and after the cryogenic process. X-ray diffraction (XRD) measurement was made to determine the effect of cryogenic process on the crystallinity of Ibuprofen. The results showed that the size of Ibuproffn was reduced about 10 times by the cryogenic process. The degree of crystallinity of Ibuproffn was slightly reduced by the cryogenic process.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.1022-1027
• /
• 2005

In this study, ball milling process was applied to reduce the particle size of bio-material down to submicron size. The material used was Ibuprofen. The ball milling was performed at low temperature of about $-180^{\circ}C$. The effect of processing conditions (milling time, milling speed) on the particle size was determined. The results showed that the degree of crystallite of Ibuprofen was slightly reduced by the ball milling process. The results also showed that the size of Ibuprofen was significantly reduced by the ball milling process. The effect of milling time was significant within the milling time of six hours while it was small thereafter.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.158-158
• /
• 2004

본 연구에서는 이부프로펜(Ibuprofen)분말을 마이크론(Micron) 크기의 입자로 만들기 위하여 극저온 볼 밀링 공정(Cryogenic Ball Milling Process)을 사용하였다. 극저온 볼 밀링 공정은 약 -18$0^{\circ}C$의 질소 분위기에서 6시간 동안 실행되어 졌다 이부프로펜 분말 형상의 변화는 SEM(Scanning Electronic Microscope)촬영을 통하여 관찰하였으며, 분말의 입자 크기와 분포는 입도 분석기(Particle Size Analysis)를 사용하여 극저온 볼 밀링 공정 전ㆍ후의 변화를 관찰하였다(중략)

• 한국결정성장학회지
• /
• 제23권2호
• /
• pp.108-113
• /
• 2013

$CuInSe_2$(CIS) chalcopyrite 물질은 고효율 박막 태양전지를 위한 광흡수층의 물질로 매우 잘 알려져 있다. 최근 태양광 산업의 흐름은 안정적인 재료 개발과 가격 경쟁력 있는 태양전지를 위한 효율적인 제조 공정을 일치시키는 것이다. 저가의 CIS 광흡수층 위해 다양한 방법으로 제조를 시도하였고, 본 논문에서는 CIS 광흡수층을 저가형으로 제조를 위해 상용화되는 6 mm pieces를 사용하여 high frequency ball milling과 cryogenic milling을 이용해 CIS 나노입자를 얻었다. 그리고, CIS 광흡수층은 불활성 분위기의 glove box 안에서 milling된 나노입자를 사용하여 paste coating법으로 제조하였다. Chalcopyrite CIS 박막은 기판온도 550도에서 30분간 셀렌화 한 후 성공적으로 제조되었으며, Al/ZnO/CdS/CIS/Mo 구조의 CIS 태양전지는 evaporation, sputtering 및 chemical bath deposition(CBD) 등 다양한 증착 방법으로 각각 제조하였다. 결론적으로, 나노입자를 이용한 CIS 태양전지 전기적 변환효율은 1.74 %를 얻었으며, 개방전압(Voc)는 29 mV, 합선전류밀도(Jsc)는 35 $mA/cm^2$, 그리고 충진율(FF)은 17.2 %였다. 나노입자 CIS 광흡수층은 energy dispersive spectroscopy(EDS), x-ray diffraction(XRD) 그리고 high-resolution scanning electron microscopy(HRSEM) 등으로 특성 분석을 하였다.

• 한국분말재료학회지
• /
• 제28권5호
• /
• pp.389-395
• /
• 2021

Oxide dispersion-strengthened (ODS) steel has excellent high-temperature properties, corrosion resistance, and oxidation resistance, and is expected to be applicable in various fields. Recently, various studies on mechanical alloying (MA) have been conducted for the dispersion of oxide particles in ODS steel with a high number density. In this study, ODS steel is manufactured by introducing a complex milling process in which planetary ball milling, cryogenic ball milling, and drum ball milling are sequentially performed, and the microstructure and high-temperature mechanical properties of the ODS steel are investigated. The microstructure observation revealed that the structure is stretched in the extrusion direction, even after the heat treatment. In addition, transmission electron microscopy (TEM) analysis confirmed the presence of oxide particles in the range of 5 to 10 nm. As a result of the room-temperature and high-temperature compression tests, the yield strengths were measured as 1430, 1388, 418, and 163 MPa at 25, 500, 700, and 900℃, respectively. Based on these results, the correlation between the microstructure and mechanical properties of ODS steel manufactured using the composite milling process is also discussed.