• Bulletin of the Korean Chemical Society
• /
• v.17 no.6
• /
• pp.511-514
• /
• 1996

The interactions between Ln(dpm)3 [Ln3+=Eu3+, Yb3+, Pr3+, Sm3+, Tb3+and Ho3+; dpm=tris 2,2,6,6-tetramethylheptane-3,5-dionate] and acetamide in CCl4 solution were investigated using near IR absorption spectroscopy. From the measured 2 νC=O+ amide Ⅲ combination band of acetamide in the region of 2130-2180 nm(4695-4587 cm-1), it was found that acetamide is coordinating through its carbonyl oxygen atom to Ln(dpm)3[C=O…Ln(dpm)3)] and forms only 1 : 1 stoichiometric Ln(dpm)3- acetamide complex. The ΔHo values for the formation of Ln(dpm)3-acetamide obtained from the temperature studies are -39.1, -28.4, -25.5, -24.7, -21.1 and -17.7 kJ mol-1 for Eu(dpm)3, Yb(dpm)3, Pr(dpm)3, Sm(dpm)3, Tb(dpm)3 and Ho(dpm)3, respectively, which are larger than those of the hydrogen bond between amide and various hydrogen acceptors. Except Eu(dpm)3 and Yb(dpm)3, -ΔHovalue increases as the ionic size increases.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.3
• /
• pp.163-170
• /
• 1977

The present study was carried out to knew the sterol components of U. pinnatifida and their incorporation abilities of $^14C-1-acetate$ injected into it. The results obtained are as follows: 1. The total lipids are classified as hydrocarbon $1.6\%$, pigment and sterol ester $2.5\%$, triglyceri do $3.3\%$, free fatty acid $2.2\%$, free sterol $3.8\%$, chlorophyll $18.8\%$, and polar lipids $ 67.3\%$ 2. The sterol mixture from U. pinnatifida are omposed of cholesterol $3.5\%$, 24-methylene-cholesterol $11.2\%$, fucosterol $85.3\%$. 3. The radioactivities of the lipids classes from U. pinnatifida injected with $^14C-1-acetate$ are distributed 4,648 dpm/ug in total lipid, 2,754 dpm/mg in polar lipids, 373 dpm/mg in chlorophyll, 22,481 dpm/mg in free sterol, 6,520 dpm/mg in free fatty acid, 789 dpm/mg in sterol ester and 358 dpm/mg in hydrocarbon respectively. 4. The specific radioactivities of the sterols are 115 dpm/mg in cholesterol, 147,821 dpm/mg in 24-methylenecholesterol, 20, 887 dpm/mg in fucosterol.

• Journal of Broadcast Engineering
• /
• v.25 no.3
• /
• pp.362-373
• /
• 2020

Recently, as autonomous vehicles and intelligent CCTV are growing more interest, the efficient object detection is essential technique. The DPM(Deformable Part Models) which is basis of this paper have used a typical object system that represents highly variable objects using mixtures of deformable part for object. Although it shows high detection performance by capturing part shape and configuration of object model, but it is limited to use in real application due to the complicated algorithm. In this paper, instead of image feature pyramid that takes up a large amount of computation in one part of the detector, we propose a method to reduce the computation speed by reconstructing a new image feature pyramid that uses adaptive bilinear interpolation of feature maps obtained on a specific image scale. As a result, the detection performance for object was lowered a little by 2.82%, however, the proposed detection method improved the speed performance by 10% in comparison with original DPM.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.12
• /
• pp.573-579
• /
• 2005

Dynamic analysis of a transmission line which is compensated by a FACTS device such as STATCOM, SSSC and UPFC is carried out in this paper and the impacts on conventional line protection methods such as the DCPM (Differential Current Protection Method) and the DPM (Distance Protection Method) are reviewed. A refined DCRM is proposed to detect faults properly regardless of the FACTS operation. The proposed method is applied to a FACTS-compensated line with a variety of faults and is verified by simulation results. An adaptive DPM on a FACTS-compensated line was proposed previously in the literature. In order to emphasize the necessity of the modified DPM, the conventional DPM is applied to a FACTS-compensated system. Significant factors such as fault types, fault locations, and fault resistances as well as FACTS device types are considered for relaying setting.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.1
• /
• pp.81-88
• /
• 2020

Diesel particulate matter (DPM) induces inflammatory cytokines in HaCaT and stimulates XRE promoter activity through AhR binding. Thus, it increases CYP gene family expression. In this study, we have elucidated inhibitory effect of LG Herbal Medicine Complex (LG-HMC) on DPM-induced XRE promoter activity and inflammatory cytokine expression. First of all, the XRE promoter activity was overexpressed by DPM treatment and the LG-HMC abrogated the XRE promoter activity. Morus alba bark extract, Scutellaria baicalensis root extract and constituents of LG-HMC, were found to be main effecters against DPM induced XRE promoter activation. We also found that DPM treatment elevated inflammatory cytokines in HaCaT and the treatment of LG-HMC, Morus alba bark extract and Scutellaria baicalensis root extract down-regulated the DPM induced inflammatory cytokine expression. Additionally, Morus alba bark extract and Scutellaria baicalensis root extract were found to act as free radical scavengers. In conclusion, we confirmed skin protective effect of LG-HMC and uncovered two components, Morus alba bark extract and Scutellaria baicalensis root extract, that play major role in protecting epidermal kertinocytes from damage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2A
• /
• pp.128-134
• /
• 2012

In this paper, we propose a novel approach to enhance the recognition performance of a far and partially occluded three-dimensional (3-D) target in computational curving-effective integral imaging (CEII) by using the direct pixel-mapping (DPM) method. With this scheme, the elemental image array (EIA) originally picked up from a far and partially occluded 3-D target can be converted into a new EIA just like the one virtually picked up from a target located close to the lenslet array. Due to this characteristic of DPM, resolution and quality of the reconstructed target image can be highly enhanced, which results in a significant improvement of recognition performance of a far 3-D object. Experimental results reveal that image quality of the reconstructed target image and object recognition performance of the proposed system have been improved by 1.75 dB and 4.56% on the average in PSNR (peak-to-peak signal-to-noise ratio) and NCC (normalized correlation coefficient), respectively, compared to the conventional system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.190-196
• /
• 2013

Curved integral imaging is a simple method to display 3D images in space using lens array and provides wide viewing angle. In this paper, we propose a nonlinear 3D correlator based on the direct pixel-mapping (DPM) method in order to improve the recognition performance of 3D target object in curving-effective integral imaging. With this scheme, the elemental image array (EIA) originally picked up from a partially occluded 3-D target object can be converted into a resolution enhanced new EIA by using DPM method. Then, through nonlinear cross-correlations between the reconstructed reference and the target plane images, the improved pattern recognition can be performed from the correlation outputs. To show the feasibility of the proposed method, some preliminary experiments are carried out and results are presented by comparing the conventional method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.593-602
• /
• 2016

Numerical simulations on the close-coupled supersonic gas atomizer for metallic powder production were performed in this study. A proper turbulence model was chosen and then VOF(Volume of Fluid) and DPM(Discrete Phase Model) methods were sequentially applied for the simulations of primary and secondary break-up processes of liquid metal. Diameters of parent droplets were calculated by analyzing Level-Set function contour from the VOF result. Finally, the distribution of particle diameter was obtained from the DPM result at exit of the computational domain.

• Environmental Engineering Research
• /
• v.23 no.3
• /
• pp.265-270
• /
• 2018

This study was to measure the exposure of diesel vehicle drivers to elemental carbon (EC) as an indicator of diesel particulate matter (DPM) emitted from diesel vehicles in an underground coal mine over 3 years as per NIOSH Method 5040. Our study results (range $10{\mu}g/m^3-377{\mu}g/m^3$ for the loader drivers, $19{\mu}g/m^3-162{\mu}g/m^3$ for the SMV drivers) were similar or less than previous study results (range $5{\mu}g/m^3-2,200{\mu}g/m^3$) for normal mine operations. From this study results, it appeared that the exposures decreased in the second and the third year. It is thought that the reasons for the decreased personal DPM (EC) exposures over the 3 years were related to the following recommendations; more frequent monitoring and maintenance of the diesel vehicles and their DPM filtration systems, more consistent monitoring of the mine's ventilation system and changes of work practices such as minimizing the opening of diesel vehicle windows. An educational program on adverse health effects of exposure to DPM and use of respiratory protection (P2 respirators) also assisted in minimizing driver exposure to DPM.

• Nuclear Engineering and Technology
• /
• v.11 no.2
• /
• pp.119-126
• /
• 1979

The reaction of 4,4'-dihydroxydiphenl methane (4,4'-DPM) with glycidyl methacrylate (GMA) catalyzed by triethylbenzyl ammonium chloride (TEBAC) has been studied for the purpose of synthesis of electron beam curable prepolymer. The reaction was in good agreement with third-order kinetics. according to -d[GMA]/dt=k[TEBAC][DPM][GMA] and the apparent activation energy was about 33.4kca1/mole. However, the reaction rates were increased if tile reaction proceeded after the mixtures exposed to air for 24 hrs at room temperature. The effects of the catalyst and the difference in the reactivity between 2.2'-DPM to GMA were discussed. The plausible reaction mechanism was proposed on basis of experimental data obtained.