• Journal of information and communication convergence engineering
• /
• v.8 no.5
• /
• pp.528-533
• /
• 2010

This research is part of the development of Data Acquisition embedded system that specifically use in ship. The purpose of this data acquisition system mainly is to acquire data from multiple sensors or others related external devices and it will further discuss in this paper. The data collecting, hardware design, software design and the final project outcome of this data acquisition system will be discussed in this paper.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.10a
• /
• pp.8-11
• /
• 1986

Data acquisition system is needed in signal analysis and processing by using computer. This paper realizes the high speed data acquisition system by using 8bit, 20MHZ refresh A/D converter and 18 x 64 Byte high speed memory. The high speed data acquisition system provides converted data to IBM-PC XT micro computer.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.196-199
• /
• 2006

Various communication mechanisms have been developed to acquire a meaningful data from sensors. The key requirement during the sensor data acquisition is determinism and reduction of time dependency. It is a fundermental level of satellite data management for controlling satellite operation software data acquisition from sensors or subsystem. Satellite operation software has various software modules to be operated in addition to data acquisition. Therefore, unnecessary time delay shall be minimized to perform the data acquisition. As the result, interrupt method might be prefered than polling method because the former can decrease the restriction of design during implementation of data acquisition logic. The possible problems while using interrupt method like as interrupt latency caused by delaying of interrupt processing time are analyzed. In this paper, communication mechanism which can be used to interface with satellite computer and subsidary subsystem by using interrupt is presented. As well, time dependency between software scheduling and data acquisition is analyzed.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.3
• /
• pp.1-20
• /
• 2020

In accordance with the Government's policy, renewable power generation is expanding very largely. This leads to increasing uncertainty in the power market and power system owing to the intermittent and fluctuating output characteristics of renewable power generators. Data on the acquisition of renewable power generators can be largely classified according to the operation of the power market and power system. Data on the settlement for the payment for the power amount are acquired in the power market, and real-time data for monitoring the status and output of the generators are acquired in the power system. However, renewable power generators operating in the power market have different acquisition cycles depending on the method of communication of the power meter. They acquire data only for settlement purposes and have no real-time data, which requires improvement. In this paper, the acquisition status is reviewed by classifying the data of renewable power generators into settlement and real-time data. In addition, measures and acquisition criteria for real-time data of renewable power generators for improving the acquisition method are proposed.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.166-171
• /
• 2001

A digital seismic data acquisition and processing system using a PC has been developed in order to replace the analog data acquisition system of shallow marine seismic survey. An A/D converter that has 12bits of resolution and 225KHz of conversion rate was ued to acquire data, and a data acquisition software was developed as a Windows program which provides convenience of use. Raw data acquired at field has been saved to the hard-disk simultaneously. The signal to noise ratio, vertical and horizontal resolution could be improved by a digital data processing of the raw data. The digital processing of the raw data includss gain recovery, filtering, deconvolution, and muting. With the prediction deconvolution algorithm multiple reflections appearing on the shallow marine seismic section could be removed successfully.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.3
• /
• pp.67-76
• /
• 2002

Data-Acquisition systems are widely used in Photovoltaic(PV) system application in order to analyze and optimize the performance of PV systems. In this paper, the development of a computer-based data-acquisition system and its application are described. The proposed Computer-based data-acquisition System consists of a set of sensors for measuring both environmental and electrical parameters. The collected data are first conditioned and then interfaced to PC using a data-acquisition card. The Labview program was used to further process, display on the monitor at real time and store on the hard disk. We designed and installed two stand-alone PV systems to supply different loads, which in this case a Low Pressure Sodium(LPS) 55 [W] lamp and a electrodless 55 [W] lamp. When the proposed data acquisition system is applied on the designed PV systems, Optimized system operation methods are investigated to confirm a stable load availability and extend battery life time.

• 시스템엔지니어링워크숍
• /
• s.4
• /
• pp.135-140
• /
• 2004

Defense analysis & evaluation includes menace analysis, validation analysis, problem analysis, scientific technical analysis, technical trad-off analysis, alternative analysis, cost analysis, etc. Reliable related data is required to perform these analysis activities efficiently. but in case of these defense analysis & evaluation data acquisition system, the data is insufficient and scattered about each organization. the data of database system is also not utilized sufficiently. abroad technical data is also low level data such as catalog or military officer's collection. therefore, this paper propose defense analysis & evaluation data acquisition system by systems engineering process. we also propose construction method of data acquisition system.

• Journal of the Korean Society of Systems Engineering
• /
• v.1 no.2
• /
• pp.69-76
• /
• 2005

Defense analysis & evaluation includes menace analysis, validation analysis, problem analysis, scientific technical analysis, technical trade-off analysis, alternative analysis, cost analysis, etc. Reliable related data is required to perform these analysis activities efficiently. but in case of these defense analysis & evaluation data acquisition system, the data is insufficient and scattered about each organization. The data of database system is also not utilized sufficiently. Abroad technical data is also low level data such as catalog or military officer's collection. Therefore, this paper propose defense analysis & evaluation data acquisition system by systems engineering process. we also propose construction method of data acquisition system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.851-858
• /
• 2012

In this paper, we design a seismic data acquisition system(SDAS) and implement it. This system is essential for development of a noble local earthquake disaster preventing system in population center. In the system, we choose a proper MEMS-type triaxial accelerometer as a sensor, and FPGA and ARM processor are used for implementing the system. In the SDAS, each module is realized by Verilog HDL and C Language. We carry out the ModelSim simulation to verify the performances of important modules. The simulation results show that the FPGA-based data acquisition module can guarantee an accurate time-synchronization for the measured data from each axis sensor. Moreover, the FPGA-ARM based embedded technology in system hardware design can reduce the system cost by the integration of data logger, communication sever, and facility control system. To evaluate the data acquisition performance of the SDAS, we perform experiments for real seismic signals with the exciter. Performances comparison between the acquired data of the SDAS and the reference sensor shows that the data acquisition performance of the SDAS is valid.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.4
• /
• pp.176-181
• /
• 1997

A practical, easy-to-use data acquisition device has been developed for use in civil and envirionmental engineering applications. It uses the PC parallel port for the acquisition and data transfer and is simple enough to be setup and run in laboratory and field experiment conditions. The usual limitations of data storage capacity of several data loggers was solved by using PC resources. Also versatile programming capability using high level languages of the PC programming environment such as C and Visual Basic enables the data acquisition device to be configured as a general and practical data acquisition system. An example of effective uses of the device is. provided for the water environment measurement at the Bangwha bridge construction site. The in site. test proved the device to be practical in civil and environmental engineering applications.