• Transactions of the Society of Information Storage Systems
• /
• v.2 no.4
• /
• pp.224-229
• /
• 2006

There has been studied flow to minimize the spot size to increase data capacity. Optical data storage devices are being developed near practical limits with wavelength and NA of 405nm and 0.85. There has been studied many types of next generation storage devices such as blu-ray multilayer system, probe based data storage and holographic data storage. Among these data storage devices, solid immersion lens(SIL) based near field recording (NFR) has been widely studied. In this system, SIL is the key component that focuses the laser beam with a very small size which enables ultra high data capacity. Therefore, optical performance evaluation system is required for SIL assembly. In this dissertation, a simple and accurate SIL assembly measurement method is proposed with wedge plate lateral shearing interferometer(LSI). Wedge plate LSI is cheaper than commercialized interferometer, robust to the vibration and the moving distance for phase shifting is large that is order of micrometer. We designed the thickness, wedge angle, material, surface quality and wavelength of wedge plate as 1mm, 0.02degree, fused silica, lamda/10(10-5) and 405nm, respectively. Also, we confirmed simulation and experimental results with quantitative analysis. This simple wedge plate LSI can be applied to different types of SIL such as solid immersion mirror(SIM), hemispherical, super-hemispherical and elliptical SIL.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.1
• /
• pp.13-16
• /
• 2007

The purpose of this paper is real time tilt servo control of the holographic data storage system. Holographic data storage device is a next generation data storage device with high storage density, high transfer rate and short access time. This device is very sensitive to a disturbance due to the enormous storage density. As to the recording material changed disc type, the media continuously vibrates as the disc rotates. When disc rotates, deviation, eccentricity and unbalance disturbance are occurred. This disturbances cause disc tilt, finally reference beam does not illuminates to correct incidence angle. Therefore real time tilt servo control is essential. In this paper, the algorithm is proposed to make real time tilt detection in angle multiplexing of the holographic data storage system with an additional servo beam and the experiments are performed.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.445-450
• /
• 2001

DVD(Digital Versatile Disk) is the data storage media devised to make high storage density and high data input/output possible. Therefore higher rotational speed and better accuracy in optical pick-up are required compared with the existing optical storage device. These operational functional requirements are concerned with abilities of optical storage device. Especially, High rotational speed is deeply concerned with the noise and vibration of optical storage device, is important problem in development of optical storage device so much. This paper propose a new concept ROM media of optical storage device named as Cylindrical ROM media, and evaluate this by means of Axiomatic approach and empirical data.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.1
• /
• pp.21-35
• /
• 2000

MIDAS-II is the storage system for BADA DBMS developed at ETRI. This paper describes the extension of MIDAS-II for incorporating the tertiary storage device such as an optical disk jukebox or a tape library, enabling MIDAS-II to function as a storage system of the data server that stores a massive amount of multimedia data. The MIDAS-II disk volume structure is extended to efficiently function as a volume for the tertiary storage device with multiple platters, which canstore huge amount of data of the order of tera bytes. The storage structure of the LOB is changed to efficiently manage the LOB data in the tertiary storage device. The data structures of the shared memory, the process structure, and the utilities in MIDAS-II are also extended to efficiently incorporating the tertiary storage device. The functionalities of each MIDAS-II API function are expanded to handle the tertiary storage device, while the prototypes of those functions are intact in order not to affect the existing application programs. The performance evaluation shows that the extended MIDAS-II works effectively with the tertiary storage device. All these extensions and the performance evaluation are conducted in the SunOS 5.4 environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4B
• /
• pp.403-410
• /
• 2004

In general communication system is composed of processor subsystems, I/O processor subsystems and data storage device subsystems those are classified as their functions. In order to improve the data reliability, all subsystems are redundant. Storage device keeps the operational information such as system related information and charging information, and such informations must be stored in non-volatile memory. Flash memory and battery backup memory are commonly used as the non-volatile storage devices. But such kind of memories are expensive per unit capacity and data can't be restored when lost while not being backed up. In this paper we develop a redundant storage device to store a lot of data safely and reliably in communication system. The device consists of micro-controller, FPGA and hard disk It provides many functions those are rebuilding, automatic remapping, host service and remote host service. Also it is designed to provide host service while rebuilding is being done in order not to interrupt the communication services. The developed device can be used instead of expensive storage device like flash memory in various communication systems.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.263-266
• /
• 2000

In this paper we develop a dual storage device to store a lot of data safely and reliably in communication system. The device consists of micro-controller, FPGA and hard disk. It provides many functions those are rebuilding, automatic remapping, host service and remote host service. The developed device can be used instead of expensive storage device like flash memory in various communication systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1099-1102
• /
• 2005

In this paper, a new visual servo method, which uses 5 axis picomotor to compensate the misalignment generated between a SLM and a CCD in a holographic storage device, was proposed and the effectiveness of it was proved by the experiment. In a holographic storage device, the data processing is done by the SLM and the CCD, and the shape of data is 2 dimensional binary patterns. Therefore, the exact image matching between the SLM and the CCD is very important, and the mismatching of it causes the errors in the data reconstruction. First, the brief introduction of a holographic data storage is given, then, BER concept which is errors caused by pixel mismatch between the SLM and the CCD is defined. Second, the geometric relation between 5 axis picomotor and the CCD movement is studied. Finally, the visual servo method using 5 axis picomotor to reduce the BER in a holographic storage device is proposed and experimented. From the experiment, we find that about 3% BER improvement is obtained by the proposed method.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.4
• /
• pp.39-45
• /
• 2010

Because of portable storage device's technical improvement, it's speeding up the conversion of mass storage. It means it's easier to move and save data. Generally, USB is using for portable storage device and forensic perspective, it's possible us to study data drain through portable storage device under securement of using vestige of USB. If we can secure using vestige of USB from boot domain it's possible to investigate data drain & prove criminal act. This thesis is suggesting Key/Thumb drive & USB Drive Enclosure's confirmation of using or not and division way though Disk Signature analysis.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.377-382
• /
• 2010

With the advent of flash memory based new storage device (SSD), there is considerable interest within the computer industry in using flash memory based storage devices for many different types of application. The dynamic index structure of large text collections has been a primary issue in the Information Retrieval Applications among them. Previous studies have proven the three approaches to be effective: In- Place, merge-based index structure and a combination of both. The above-mentioned strategies have been researched with the traditional storage device (HDD) which has a constraint on how keep the contiguity of dynamic data. However, in case of the new storage device, we don' have any constraint contiguity problems due to its low access latency time. But, although the new storage device has superiority such as low access latency and improved I/O throughput speeds, it is still not well suited for traditional dynamic index structures because of the poor random write throughput in practical systems. Therefore, using the experimental performance evaluation of various index maintenance schemes on the new storage device, we propose an efficient index structure for new storage device that improves significantly the index maintenance speed without degradation of query performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.46-54
• /
• 2001

Technology of data storage device has developed noticeably as demands and needs of new media increase, Huge data can be conveniently handled using removable type optical disk. In the present paper, the trend and current issue of development for optical disk media are introduced. Standardization of next generation optical disk media, technology of recording and reading, and applications of magneto-optical devices are also discussed. Finally, a methodology of process optimization for design and fabrication of high density optical disk substrate is proposed.