• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1841-1846
• /
• 2003

The mobile platform-manipulator discussed in this paper is a three link manipulator mounted on a mobile platform. This mobile manipulator is used for welding operation and it is able to operate in a narrow space. The task of the torch, which is mounted at the end effector of the manipulator, is to track along the seam line and the task of the mobile platform is to move the origin point of the manipulator in order to go away from the singularity of the manipulator’s configuration. In this paper, the path planning for the motion of two subsystems (i.e., the manipulator and the mobile platform) was presented by the decentralized control method. Two controllers for the mobile platform and the manipulator were designed, and the relationship between the independent controllers is its state information. The simulation results are also presented to demonstrate the effectiveness of the control method.

• Smart Structures and Systems
• /
• v.19 no.1
• /
• pp.47-56
• /
• 2017

Considerable achievements in developing structural regulators as an important method for vibration control have been made over the last few decades. The use of large quantities of cables in traditional wired control systems to connect sensors, controllers, and actuators makes the structural regulators complicated and expensive. A wireless decentralized control experimental platform based on Wi-Fi unit is designed and implemented in this study. Centralized and decentralized control strategies as sample controllers are employed in this control system. An optimal control algorithm based on Kalman estimator is embedded in the dSPACE controller and the DSP controller. To examine the performance of this control scheme, a three-story steel structure is developed with active mass dampers installed on each floor as the wireless communication platform. Experimental results show that the wireless decentralized control exhibits good control performance and has various potential applications in industrial control systems. The proposed experimental system may become a benchmark platform for the validation of the corresponding wireless control algorithm.

• Journal of Mechanical Science and Technology
• /
• v.19 no.3
• /
• pp.756-767
• /
• 2005

This paper presents a decentralized motion control method of welding mobile manipulators which use for welding in many industrial fields. Major requirements of welding robots are accuracy, robust, and reliability so that they can substitute for the welders in hazardous and worse environment. To do this, the manipulator has to take the torch tracking along a welding trajectory with a constant velocity and a constant heading angle, and the mobile-platform has to move to avoid the singularities of the manipulator. In this paper, we develop a kinematic model of the mobile-platform and the manipulator as two separate subsystems. With the idea that the manipulator can avoid the singularities by keeping its initial configuration in the welding process, the redundancy problem of system is solved by introducing the platform mobility to realize this idea. Two controllers for the mobile-platform and the manipulator were designed, respectively, and the relationships between two controllers are the velocities of two subsystems. Control laws are obtained based on the Lyapunov function to ensure the asymptotical stability of the system. The simulation and experimental results show the effectiveness of the proposed controllers.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.5
• /
• pp.689-701
• /
• 2008

In this paper, a fully adaptive feedforward feedback synchronized tracking control approach is developed for precision tracking control of 6 degree of freedom (6DOF) Stewart Platform. The proposed controller is designed in decentralized form for implementation simplicity. Interconnections among different subsystems and gravity effect are eliminated by the feedforward control action. Feedback control action guarantees the stability of the system. The gains of the proposed controller can be updated on line without requiring any prior knowledge of Stewart Platform manipulator. Thus the control approach is claimed to be fully adaptive. By employing cross-coupling error technology, the proposed approach can guarantee both of position error and synchronization error converge to zero asymptotically. Because the actuators work in synchronous manner, the tracking performances are improved. The corresponding stability analysis is also presented in this paper. Finally, simulation is demonstrated to verify the effectiveness of the proposed approach.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.3
• /
• pp.191-200
• /
• 2019

This study proposes a hardware-in-the-loop simulation (HILS) system based on National Instruments' PXI platform to test power management and operation strategies for DC microgrids (MGs). The HILS system is developed based on the controller HIL prototype, which involves testing the controller board in hardware with a real-time simulation model of the plant in a real-time digital simulator. The system provides an economical and effective testing function for research on MG systems. The decentralized power management strategy based on the DC bus signaling method for DC MGs has been developed and implemented on the HILS platform. HILS results are determined to be similar to those of the off-line simulation in PSIM software.

• Smart Structures and Systems
• /
• v.12 no.3_4
• /
• pp.399-414
• /
• 2013

The smart sensor technology has opened new horizons for assessing and monitoring structural health of civil infrastructure. Smart sensor's unique features such as onboard computation, wireless communication, and cost effectiveness can enable a dense network of sensors that is essential for accurate assessment of structural health in large-scale civil structures. While most research efforts to date have been focused on realizing wireless smart sensor networks (WSSN) on bridge structures, relatively less attention is paid to applying this technology to buildings. This paper presents a decentralized damage detection using the WSSN for building structures. An existing flexibility-based damage detection method is extended to be used in the decentralized computing environment offered by the WSSN and implemented on MEMSIC's Imote2 smart sensor platform. Numerical simulation and laboratory experiment are conducted to validate the WSSN for decentralized damage detection of building structures.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.376-377
• /
• 2018

A hardware-in-the-loop (HIL) platform for a power management control of islanded DC microgrids is established. In order to avoid the complexity and high costs, a decentralized control based on the DC Bus Signaling (DBS) method is applied to the HIL system. The simulation results for the HIL microgrid platform have verified the effectiveness of power management strategy.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.4
• /
• pp.127-136
• /
• 2022

As technological development continues, platforms with more diverse structures are emerging. Existing research predicts that a new structure based on technology and innovation will affect the two-sided market. This study evaluated the decentralized identifier (DID) platform, a new platform based on blockchain technology, of the importance of this platform from the perspective of the two-sided market. Using the Analytic Network Process, IT, platform, and blockchain experts conducted a dual comparison survey. Data with a consistency ratio value of 0.1 or less were selected and analyzed for 12 data. The research results showed the importance of service quality, policy support, openness, and uncertainty. This study is expected to be used to support the development of strategic decision-making for blockchain and DID platform-based business companies.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.235-237
• /
• 2018

The Internet has allowed many things to move fast, including sharing of data, files and others within a second. Many domains use applications range from IoT, smart cities, healthcare, and organizations to share the data when necessary. However, there are some challenges faced by existing systems that works on centralized nature. Such challenges are data breach, trustiness issue, unauthorized access and data fraud. Therefore in this work, we focus on using a smart contract which is used by blockchain platform and works on decentralized form. Furthermore, in this work our contract provides an access to the file uploaded onto the decentralized storage such as IPFS. By leveraging smart contract-role based which consist of a contract owner who can manage the users when access the certain resources such as a file and as well as use of decentralized storage to avoid single point of failure and censorship over secure communication channel. We checked the gas cost of the smart contract since most of contracts tends to be a high cost.

• Journal of information and communication convergence engineering
• /
• v.22 no.1
• /
• pp.64-69
• /
• 2024

Blockchain is a decentralized network in which data blocks are linked. Through a decentralized peer-to-peer network, users can create shared databases, resulting in a trustworthy and aggregated database known as a blockchain that enhances reliability and security. The distributed nature of the blockchain enables data to be stored on multiple nodes, eliminating the need for a central server or platform. This disintermediation significantly reduces the transaction and administrative costs. The blockchain is particularly valuable in applications where reliability and stability are critical because it establishes an open database that ensures data integrity, making it virtually impossible to tamper with or falsify data. This study explores the diverse applications of the blockchain technology in virtual assets, such as cryptocurrency, decentralized finance, central bank digital currency, nonfungible tokens, and metaverses. In addition, it analyzes the potential prospects and developments driven by these innovative technologies.