• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.291-293
• /
• 2000

In 64M DRAM, sub-1/4m NMOSFETs with STI(Shallow Trench Isolation), anomalous hump phenomenon of subthreshold region, due to capped p-TEOS/SiN interlayer induced defect, is reported. The hump effect was significantly observed as channel length is reduced, which is completely different from previous reports. Channel Boron dopant redistribution due to the defect should be considered to improve hump characteristics besides consideration of STI comer shape and recess.

• EDISON SW 활용 경진대회 논문집
• /
• 제3회(2014년)
• /
• pp.505-507
• /
• 2014

본 연구에서는 제일원리 계산을 이용하여 $Si(100)/SiO_2$ 계면 내부에서 발생하는 point defect들의 거동에 대해 살펴보았다. Defect 계산에 앞서 안정한 $Si/SiO_2$ 계면을 찾아보았고 찾은 계면을 바탕으로 계면에서 point defect의 formation energy를 계산해 보았고 이를 통해 Si defect의 경우 Si층 쪽 보다는 $SiO_2$ 층에서, 그리고 계면 내부 보다는 계면 경계 근처에서 발생할 가능성이 높음을 보였다.

• 한국건축시공학회지
• /
• 제18권2호
• /
• pp.195-202
• /
• 2018

The defects that are bound to arise in most construction projects cause disputes among the contracting parties regarding the defect warranty liability (DWL)guaranteed by the retention of the contractor's performance security at the end of the performance period of the contract. Most current projects involve a multiple-tier contractual relationship, causing the liability for some defects to overlap. In addition, many construction projects are made up of multiple detailed work types which an expert hired by the owner inspects the part completed by the contractor and pays an interim payment. However, after the completion of work, the contractor will still hold the defect warranty liability. In a scenario in which the work is delayed due to reasons for which the owner is responsible, the defect warranty liability period is also increased, imposing an additional burden on the contractor. In this study, basic research was carried out with the goal of reducing problems related to defect warranty liability Problems related to defect warranty liability cases and the nature of the defect warranty liability period were investigated. Possible solutions to the problems caused by the DWL that were suggested include the separation of the negligence liability period and the strict liability period, as well as the introduction of a retention money system.

• Journal of Chest Surgery
• /
• 제8권2호
• /
• pp.81-88
• /
• 1975

Up to October 31, 1975, 34 cases of atrial septal defect, secundum type, operated in this department, were presented. This is 23.2% of all congenital heart diseases, operated utilizing cardiopulmonary bypass, in this department during this period [34 out of 146]. Out of 34 cases, 32 cases are pure ostium secundum type and one case is sinus venosus and another one is ostium secundum type with partial anomalous pulmonary venous drainage. Six cases of endocardial cushion defect and 3 cases of trilogy of Fallot are excluded in this report. All 34 cases are repaired under direct vision utilizing extracorporeal circulation. Among 34 cases of atrial septal defect, 16 cases are male, and 18 cases are female. Their ages range between 3 to 48 years, but over 59% of the cases are below the ages of 20 years. Thirty-two cases are repaired by direct sutures while 2 cases are repaired with Teflon patches. The average perfusion time is 30 minutes; the shortest 12 and the longest 81 minutes. The number of the defect is single in 31 cases, double in 2 cases, triple in one case. But the associated defect except the main defect are so small as can be closed by simple direct suture. The size of the defect is average $12cm^2$; the smallest 0.7 and the largest $25cm^2$. The surgical mortality is 2 cases [5.6%] and other cases are found to be excellent in the follow up studies.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.691-696
• /
• 2015

소프트웨어 결함에 대한 관심이 높아지고 있다. 기업은 소프트웨어를 개발하는 조직, 고객대응 조직, 품질관리 조직 등 다양한 방법과 채널을 이용하여 개선을 위한 노력을 하고 있다. 이렇게 수집된 결함 데이터 들을 그 조건과 용도에 맞게 분석하여 소프트웨어 결함을 최소화하고 나아가 제품품질 향상에 기여할 수 있다. 본 연구에서 기업용 소프트웨어의 결함 추이를 테스트 성숙도 모델을 기반으로 분석하여 결함 예방 프로세스를 수립하고 프로젝트에 적용하여 106개의 결함이 16개로 감소하였다. 본 연구는 소프트웨어 품질활동 중 기본이 되는 기존결함에 관심을 가짐으로서 최소한의 자원을 활용하여 소프트웨어 제품 품질을 개선할 수 있는 방안을 제시하는데 의의를 가진다.

• Journal of Chest Surgery
• /
• 제12권4호
• /
• pp.339-345
• /
• 1979

Mitral valve disease is the most common disease of the acquired heart diseases, and atrial septal defect is also one of common congenital heart diseases. Coexistence of these two lesions is rare, but of great hemodynamic interest. Among 443 cases with mitral valve disease and 90 cases with atrial septal defect experienced in the Department of Thoracic Surgery, Seoul National University Hospital, there were 6 cases with atrial septal defect complicated by mitral valve disease. 1. Of the 6 patients, four were female and two were male. The age was ranged from 18 to 46. 2. Atrial septal defect was ostium secundum type in all cases, and the mitral valvular lesions were regurgitation in four and stenosis in two. Type II ventricular septal defect was also combined in one of the cases. 3. The atrial septal defect was corrected by, primary closure and the mitral valve was replaced with the prosthetic or bioprosthetic valve in all cases. The combined ventricular septal defect was closed using Teflon felt patch. 4. The operative result was good except in one who was expired of bacterial endocarditis 4 months after hospital discharge.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제37권5호
• /
• pp.386-393
• /
• 2010

영상에서 일정 영역의 화소들이 불규칙적인 형태를 이루는 것을 불량이라 하는데 이를 수학적으로 정확히 정의하기 어렵다는 점이 불량 검출을 쉽지 않게 한다. 하지만 주어진 영상이 다수의 반복되는 패턴을 가지고 있다면 불량이 아닌 영역은 그 외의 다른 영역들로 설명되어 될 수 있다는 점을 이용하여 영상내의 불량 영역을 찾아낼 수 있다. 따라서 본 논문은 이러한 특성을 이용하여 다양한 패턴이 반복되는 영상에 존재하는 불량을 검출하는 방법을 제시한다. 제시된 방법은 크게 세 단계로 이루어진다. 첫 번째 단계는 interest point 검출단계이다. 두 번째 단계는 적절한 패치의 크기를 결정하는 단계이다. 마지막으로 세 번째 단계는 불량을 검출하는 단계이다. 제시된 방법은 반도체 wafer를 SEM을 이용하여 촬영한 영상들을 통하여 예증된다.

• 상하수도학회지
• /
• 제31권6호
• /
• pp.619-628
• /
• 2017

As the 3D laser scanning technology capable of databaseing large sewage box culverts becomes possible, it is necessary to develop a standardization manual that can clearly distinguish the structural and operational defect types of box culver and analyze the defect data. In this study, we collected and analyzed defects in sewage box culverts of 14,827m in total by selecting three districts in Korea. The major defects were surface damages, and their defect densities were $2.17m^2/m$, $0.27m^2/m$ and $0.10m^2/m$ for aggregate exposure, Steel reinforcement exposure, and Steel reinforcement projecting. In order to support the decision of the box culverment management, it was divided into five grades and each defect code and defect score were allocated. The results of this study are useful for the diagnosis of the sewage box culverts in Korea and it is expected to support a decision making for management.

• 전자공학회논문지 IE
• /
• 제48권4호
• /
• pp.1-6
• /
• 2011

본 논문에서는 LCD 제조공정 상에서 발생할 수 있는 결함을 검사하고 분류할 수 있는 적응적인 LCD 표면 결함 검사 시스템을 제안하였다. 즉, 반복되는 LCD 패턴의 주기를 확정한 후에 결함 패턴을 검출하고 검출된 결함 패턴의 특징을 계산하여 결함을 분류하였다. 그리고 결함을 검출하는 과정에서 발생하는 잡음은 모폴로지 연산자를 이용하여 제거하였다. 또한, 검출된 결함 패턴에서 기하학적인 특징과 통계적 특징을 계산한 후 신경회로망 알고리즘을 이용하여 여러 종류의 결함 패턴을 적응적으로 분류하였으며, 실험 결과 92.3%의 결함 검출율 및 94.5%의 결함 분류 및 인식율을 획득함으로써, LCD 결함 검사 시스템의 실질적인 구현 가능성을 제시하였다.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1597-1601
• /
• 2020

Background: Non-destructive evaluation of defects in metals or composites specimens is a regular method in radiographic imaging. The maintenance examination of metallic structures is a relatively difficult effort that requires robust techniques for use in industrial environments. Methods: In this research, iron plate, lead marker and tungsten defect with a 0.1 cm radius in spherical shape were separately simulated by MCNP code and SuperMC software. By ¹⁹²Ir radiation source, two exposures were considered to determine the depth of the actual defined defect in the software. Also by the code, displacement shift of the defect were computed derived from changing the source location along the x- or y-axis. Results: The computed defect depth was identified 0.71 cm in comparison to the actual one with accuracy of 13%. Meanwhile, the defect position was recognized by disorder and reduction in obtained gamma flux. The flux amount along the x-axis was approximately 0.5E+11 units greater than the y-axis. Conclusion: This study provides a method for detecting the depth and position of the defect in a particular sample by combining code and software simulators.