• 제목/요약/키워드: Derived form

검색결과 2,217건 처리시간 0.028초

Top-Covered 마이크로스트립구조의 Closed-form 그린함수 (A Closed-form Green마s Function for Top-Covered Microstrip Substrate)

  • 김건우;고지환;이영순;조영기
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
    • /
    • pp.109-112
    • /
    • 2002
  • So far, the closed-form Green's functions have been derived almost for th open microstrip structures. In the present study, closed-form Green's functions for a top-covered microstrip structure are derived. And an effect of top-cover is discussed in comparison with open structure.

  • PDF

선체중심선면(船體中心線面)에 분포(分布)된 특이점계(特異點系)로부터 얻어지는 최소조파저항선형(最少造波抵抗船型)과 그 응용(應用) (Minimum Wave Resistance Hull Form Derived from Center Plane Source Distribution and its Application to Hull Form Design)

  • 김효철;현범수
    • 대한조선학회지
    • /
    • 제19권4호
    • /
    • pp.31-37
    • /
    • 1982
  • Developing a minimum wave resistance hull form which is satisfying the given requirements such as displacement and speed is one of the important problems in ship hydrodynamics. The theoretical approach conducted by Pien was successful in developing an optimized hull form, however, which can not be applied directly to practical hull form without manual lines fairing process. To avoid this difficulty, source distribution which arrived after the optimization was put into a fictitious restricted channel and as a result practicably modified hull form was derived by stream line tracing. The wave resistance of the hull thus obtained was calculated by solving the simplified integral equation suggested by Kan. The resistance at design point is almost same with that of the original hull which was represented by source distribution on the vertical rectangular center plane. It is therefore recommended to use the derived hull form for the hull which obtained after manual lines fairing process at Pienoid method. Further researches both in theory and experiment are necessary before this concept is put into practical application.

  • PDF

Time-dependent analysis of cable trusses -Part I. Closed-form computational model

  • Kmet, S.;Tomko, M.
    • Structural Engineering and Mechanics
    • /
    • 제38권2호
    • /
    • pp.157-169
    • /
    • 2011
  • In this paper the time-dependent closed-form static solution of the suspended pre-stressed biconcave and biconvex cable trusses with unmovable, movable and elastic or viscoelastic yielding supports subjected to various types of vertical load is presented. Irvine's forms of the deflections and the cable equations are modified because the effects of the rheological behaviour needed to be incorporated in them. The concrete cable equations in the form of the explicit relations are derived and presented. From a solution of a vertical equilibrium equation for a loaded cable truss with rheological properties, the additional vertical deflection as a time-function is determined. The time-dependent closed-form model serves to determine the time-dependent response, i.e., horizontal components of cable forces and deflection of the cable truss due to applied loading at the investigated time considering effects of elastic deformations, creep strains, temperature changes and elastic supports. Results obtained by the present closed-form solution are compared with those obtained by FEM. The derived time-dependent closed-form computational model is used for a time-dependent simulation-based reliability assessment of cable trusses as is described in the second part of this paper.

The eigensolutions of wave propagation for repetitive structures

  • Zhong, Wanxie;Williams, F.W.
    • Structural Engineering and Mechanics
    • /
    • 제1권1호
    • /
    • pp.47-60
    • /
    • 1993
  • The eigen-equation of a wave traveling over repetitive structure is derived directly form the stiffness matrix formulation, in a form which can be used for the case of the cross stiffness submatrix $K_{ab}$ being singular. The weighted adjoint symplectic orthonormality relation is proved first. Then the general method of solution is derived, which can be used either to find all the eigensolutions, or to find the main eigensolutions for large scale problems.

아크로뱃 로봇의 정준형과 도립제어 (Cannonical Form of Acrobat Robot and Its Control of Swing-up)

  • 남택근;소명옥;박진길
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제26권4호
    • /
    • pp.432-438
    • /
    • 2002
  • In this paper, we described a technique for the swing-up control of a 2 link acrobat robot using a cannonical form which is derived form the law of conservation of an angular momentum based on the center of the first joint. The wide usefulness of the canonical form of the acrobat robot, which was suggested here, is could also be applied to control a free flying robot or an underactuated planar manipulator with no gravity term. Some simulation results are provided to verify the effectiveness of the proposed algorithm

국내 여성 패션모델 체형 반영 인대 활용을 통한 입체재단 제작 길원형 특성 분석 (Analysis of Bodice Patterns Developed through Draping Method Using the Dress Form Representing Korean Female Fashion Models' Body Features)

  • 박진아
    • 패션비즈니스
    • /
    • 제21권1호
    • /
    • pp.74-87
    • /
    • 2017
  • The aim of this study was to analyze the features of bodice patterns modeled using a dress form that represents Korean female fashion models' body features. A controlled experiment was carried out using an existing dress form that has been frequently used in South Korea. The purpose of the study was to suggest notable findings derived from understanding the development of bodice patterns for Korean female fashion models. The comparison of features of bodice patterns from the developed and existing dress forms was carried out with consideration of the upper body features of the developed dress form, such as body angles and body cross-sectional shapes. The following results were derived from the investigations. (1) The angles of the upper and lower breast cups of the developed dress form differed to those of the existing dress form, showing a 5.0cm smaller front shoulder dart and a 3.5 larger ㎝ ㎝ front waist dart within the bodice patterns. (2) The body angle features of the developed dress form included a straighter neck and shoulder blade and more concave center back than the existing dress form, with a 2.0 reduced back neck height and a 4.8 larger back waist dart for ㎝ ㎝ the bodice back panel. The more realistic body angles of the developed dress form anticipate the improvement of garment pattern-making. (3) The altered shoulder angles resulted in an increased size of the back shoulder dart and a decreased size of the front shoulder height within the bodice patterns. (4) The increased rate of curvature of cross-sectional shapes on the bust and waist circumferences of the developed dress form resulted in an increase in the sizes of the front and back waist darts.

기하학적 비선형해석을 이용한 비정형 막 구조물의 형상탐색과 인터페이스 기법 (Form-finding of Free-form Membrane Structure based on Geometrically Non-linear Analysis and Interface method)

  • 김지인;나유미;강주원;이재홍
    • 한국공간구조학회논문집
    • /
    • 제12권1호
    • /
    • pp.77-85
    • /
    • 2012
  • 막 구조물은 연성의 막에 초기 장력을 주고 외관의 강성을 늘림으로써 외부하중에 안정된 형태를 유지하는 구조물로 두께를 얇게 하여 대공간 구조에 많이 채택된다. 이러한 막 구조는 자유로운 곡선을 표현할 수 있는 특성이 있어, 구조적 형태의 선정은 매우 중요하다. 이에 본 논문에서는 넙스를 기저함수로 하는 비정형 곡면으로 형상을 표현하고, 최적의 곡면 형상 탐색을 위한 대변형 결과값 도출을 위해 기하학적 비선형을 고려한 유한요소해석법을 제안하였다. 또한, 형상 탐색 결과로 나타난 곡면의 형상 근사화의 최소화를 위해 유한 요소망으로 표현된 최종 형상을 다시 넙스로 구현하는 인터페이스 기법을 제안하여, 비정형 막 구조물의 최적 곡면을 표현하였다.

Load-carrying capacities and failure modes of scaffold-shoring systems, Part II: An analytical model and its closed-form solution

  • Huang, Y.L.;Kao, Y.G.;Rosowsky, D.V.
    • Structural Engineering and Mechanics
    • /
    • 제10권1호
    • /
    • pp.67-79
    • /
    • 2000
  • Critical loads and load-carrying capacities for steel scaffolds used as shoring systems were compared using computational and experimental methods in Part I of this paper. In that paper, a simple 2-D model was established for use in evaluating the structural behavior of scaffold-shoring systems. This 2-D model was derived using an incremental finite element analysis (FEA) of a typical complete scaffold-shoring system. Although the simplified model is only two-dimensional, it predicts the critical loads and failure modes of the complete system. The objective of this paper is to present a closed-form solution to the 2-D model. To simplify the analysis, a simpler model was first established to replace the 2-D model. Then, a closed-form solution for the critical loads and failure modes based on this simplified model were derived using a bifurcation (eigenvalue) approach to the elastic-buckling problem. In this closed-form equation, the critical loads are shown to be function of the number of stories, material properties, and section properties of the scaffolds. The critical loads and failure modes obtained from the analytical (closed-form) solution were compared with the results from the 2-D model. The comparisons show that the critical loads from the analytical solution (simplified model) closely match the results from the more complex model, and that the predicted failure modes are nearly identical.

Downlink Performance of Distributed Antenna Systems in MIMO Composite Fading Channel

  • Xu, Weiye;Wang, Qingyun;Wang, Ying;Wu, Binbin
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제8권10호
    • /
    • pp.3342-3360
    • /
    • 2014
  • In this paper, the capacity and BER performance of downlink distributed antenna systems (DAS) with transmit antenna selection and multiple receive antennas are investigated in MIMO composite channel, where path loss, Rayleigh fading and lognormal shadowing are all considered. Based on the performance analysis, using the probability density function (PDF) of the effective SNR and numerical integrations, tightly-approximate closed-form expressions of ergodic capacity and average BER of DAS are derived, respectively. These expressions have more accuracy than the existing expressions, and can match the simulation well. Besides, the outage capacity of DAS is also analyzed, and a tightly-approximate closed-form expression of outage capacity probability is derived. Moreover, a practical iterative algorithm based on Newton's method for finding the outage capacity is proposed. To avoid iterative calculation, another approximate closed-form outage capacity is also derived by utilizing the Gaussian distribution approximation. With these theoretical expressions, the downlink capacity and BER performance of DAS can be effectively evaluated. Simulation results show that the theoretical analysis is valid, and consistent with the corresponding simulation.

반추수난소(反芻獸卵巢)의 조직화학적연구(組織化學的硏究) (A Histochemical Study of the Ruminant Ovary)

  • 곽수동;이차수
    • 대한수의학회지
    • /
    • 제17권2호
    • /
    • pp.41-49
    • /
    • 1977
  • The present study was underve the histochemical nature of various follicles and interstitial tissues in the ovaries of Korean native goats and cattle as well as the histochemical changes of those in the ovaries of Korean native goats treated with dexamethasone. Much more lipid granules appeared in the granulosa and theca cells of atretic follicles compared with normal follicles in these ruminant ovaries. In the ovaries of Korean native goats the interstitial tissue derived from the theca interna of atretic follicles appeared the form of patches of cells and the interstitial tissue derived from stromal cells appeared the form of diffuse, obscure bounds. In the ovaries of Korean native cattle the interstitial tissue derived from theca interna of atretic follicles showed sparsely scattered form of pathes of cells. The histochemical components were described on the basis of lipids in the granulosa and theca cells of normal follicles, atretic follicles and interstitial tissue. In the ovaries of Korean natve goats treated with dexamethasone, the granulosa and theca cells of atretic foillicle contained plenty lipid granules that were increased in size and number, however, lipid granules were markedly decreased in the interstitial tissue.

  • PDF