• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1515-1517
• /
• 2008

The purposes of this study were to measure the ranges of motion in knee joint and during continuous passive motion(CPM) treatment and to computationally calculate joint angles at the knee joint dependent on the CPM machine design and its application. Four CPM machines and eleven candidates were recruited for this study. Experimental and numerical studies have been peformed to calculate the range-of-motion of CPM machines. From the experimental measurements, the average range of motions at the knee joint for the CPM machine #1, #2, #3, and #4 were lower than the manufactures suggested values due to improper alignments of the hip and knee joints to the CPM machines. Different design of CPM machine generated different outcomes of the ROM at the knee joints during CPM. The experiments and kinematic simulation in this study could be used to provide useful guidance in the treatment of CPM after joint surgery.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.515-521
• /
• 2003

There are now many theoretical investigations and real manufactures for numerous applications of photonic crystals (PCs) associated with photonic band gap and photonic integrated circuits. However, there are some difficulties to design and fabricate the desired pattern quality. It is not easy to satisfy accurate critical dimension (CD) for patterns with arbitrary shapes and pitch sizes aligned in various directions. In this work, we report the optimum conditions to better fabricate and design, and greatly improve pattern quality in delineating two-dimensional (2D) PCs in the nanometer range using single- step e-beam lithography system with conventional exposure mode.

• Design & Manufacturing
• /
• v.7 no.1
• /
• pp.40-44
• /
• 2013

My company develops, manufactures injection mold and produces thin-walled cosmetics and food containers. Without high quality and low production cost, it is hard to compete in the market. To be competitive, a company has to utilize mold with as many cavities as possible to lower manufacturing cost. Eject plate abrasion and deformation cut down mold lifespan, troubles during injection lower productivity and foreign substances in molds cause abrasion. This study focuses on how to improve mold life and productivity, and to slow down mold abrasion.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.3
• /
• pp.200-209
• /
• 1999

This paper presents a 3D-conferencing system as a prototype implementation of concurrent and distributed engineering environment using CORBA-Java and SDAI-Java. The system consists of some client and server objects that communicate with each other via ORB. The server objects use lightweight version of current working draft of SDAI-Java to access STEP product data models, and the client objects provide user-friendly graphical interface. The proposed system can be used for communicating with 3D CAD data between remote designers, manufactures and customers regardless of he H/W or S/W platforms they use.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.191-193
• /
• 2000

In this paper, being different from traditional methods, we design digital protective relay which can be applied to power management and control systems of not only small and medium but also a large scale plants. The digital protective relay was designed with DSP CPU(TMS320C31) to protect and measure more quickly and precisely. We will present test result which it performed according to the standards of Korea Electrical Manufactures Cooperative to prove the faculties of digital protective relay. The test result on the basis of KEMC1120 and IEC60255, show that the operation time error of the digital motor protection relay is improved within ${\pm}5%$.

• Journal of the Korea Furniture Society
• /
• v.17 no.4
• /
• pp.85-99
• /
• 2006

Fredrick Krause's chair in the Brooklyn Museum of Art (accession no. 87. 19) is a key to the understanding of factory-made, patent furniture, and the Modern Gothic style in the United States. However, research has rarely done for this chair as well as for the designer. Since this piece is incorporating the utility patent, it is a valuable example to understand the nineteenth-century patented furniture. Because of the popularity of Modern Gothic style, the similar style of chairs were often manufactured. This study explores how other examples are related and what the significance of the Brooklyn Museum chair is. The book of Sharon Darling provided especially helpful information about other Krause chairs in Fond du Lac and chair manufactures in Chicago. The interview with John Ebert at Galloway House in Fond du Lac, Wisconsin was especially helpful. Several primary sources proved helpful in researching the chair. The photo archives. of Kimbel and Cabus at the Cooper-Hewitt National Design Museum provides me a key to this research.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.106-113
• /
• 2012

A study on techniques to evaluate auditorium assignment visible efficiency using three-dimensional simulation. The most important thing to be considered is to ensure the visibility to the podium upon assigning auditorium of venues, classrooms or seminar rooms. However, since there are so many variables to be considered such as the form of the stage, the area and height of the stage, size of screen, and the distance and angle of the auditorium from the podium, the methods to assign auditorium are staying at the level of basic for a long time. Thus, in this study, we proposed simulation methodology to quantitatively evaluate the three-dimensional visible efficiency based on Visual Graph Analysis (VGA) theory. After analytical methodology manufactures application, it sets examples of visibility depending on location of screen, visibility depending on degree of height difference and visibility about three-dimensional Mass Zoning like a stage and verifies the efficacy. In addition, based on results, visibility expectation curve is drawn and the method to calculate the stepped height depending on necessary visibility is proposed.

• Transactions of Materials Processing
• /
• v.15 no.3 s.84
• /
• pp.206-212
• /
• 2006

Design programs of tube-sheet for heat exchanger based on the related engineering society codes have been widely used. But it is not easy fer beginners to use the design programs. So we need to develop an easy program for design of tube-sheet for heat exchanger. This paper describes a developed design-program of tube-sheet fur heat exchanger. The developed program was coded on boiler theory and pressure vessel codes, provided by TEMA(Tubular Exchanger Manufactures Association) and ASME(American Society of Mechanical Engineers). Visual Basic, which is convenient for beginners to deal with, was used in the programming. Also a finite element analysis of tube-sheet for heat exchanger was carried to verify this developed program by using a commercial software, ANSYS. In the finite element analysis, tube and tube-sheet of heat exchanger were substituted by solid plate having equivalent properties for convenience of calculation. The thickness of tube-sheet obtained by the developed design-program was in good agreement with that of tube-sheet by FEA.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.6
• /
• pp.416-423
• /
• 2023

Recently, the design point of the propeller is gradually changing due to the demand for energy saving and environmental protection. Until recently, self-propulsion model tests were conducted using stock propellers and geometry information was provided to propeller designers, but the range of existing stock propellers did not keep up with the changing design points, and the range of series propellers required in the initial design was also insufficient. Future propeller performance requires high performance and eco-friendliness, and the need for expansion of series propellers has increased. In order to respond to future needs and provide a wide range of advantages in propeller design, KRISO manufactures about 100 series propellers and builds series data through a model tests. In this paper, the approach method for deriving the representative optimal shape to be applied to the 4-blade series propeller in the initial stage of series propeller development was summarized.

• Journal of the Korea Furniture Society
• /
• v.15 no.1
• /
• pp.27-40
• /
• 2004

Designers in Korea have stuck to development of furniture which has high reliance of foreign national resources. They made mistake that they didn't try to make inroads into the world market. They have kept production system of labor intensive method till 1990. They imitated foreign manufactures to win in domestic economy. It became the complete lack of exploitation experience and brought stagnation of design which couldn't defeat. Now Korea is making progressive impression in territory of an electron and information in a foreign market. A new progress of furniture design which was developed centering around a digital suggest a new appearance that will lead a future with modernization in a space of residence. This sis a new starting point which was most completed by anyone. If we will prepare without delay we can take part in a world market with competitive power.