• 한국방재학회 논문집
• /
• 제8권1호
• /
• pp.145-151
• /
• 2008

농어촌지역의 하수종말처리시설 민간투자사업에 대한 계획인구 및 계획하수량 산정 방법을 검토하였다. 기존의 추정 방법에서는 인구 감소 추세임에도 불구하고, 인구가 정체될 것으로 가정하여 계획인구를 추정하고 있으며, 수도보급률이 매우 낮은 지역에서의 계획하수량을 정수장 급수보급량을 이용하여 산정하고 있다. 결과적으로 계획 인구 및 계획하수량의 과다 산정은 필요이상의 하수종말처리시설이 만들어지게 되는 결과를 가져오게 된다. 그러므로 본 연구에서는 계획 인구는 통계청의 장래인구 추계결과를 따르는 것으로 하고, 수도가 보급된 지역에서는 급수사용량을, 수도가 보급되지 않은 지역에서는 지하수 사용량을 이용하여 계획하수량을 산정하는 방안을 제시하였다.

• Korean Chemical Engineering Research
• /
• 제51권1호
• /
• pp.127-135
• /
• 2013

본 연구에서는 개선된 바이오필터설계를 가지는 새로운 바이오필터의 압력강하 및 미생물 population 분포 등을 관찰하고, 같은 유효부피를 갖고 unidirectional flow (UF)를 갖는 전통적 바이오필터의 경우와 비교하였다. 개선된 바이오필터는 운전 초기 또는 정상상태의 장기운전에서 전통적 바이오필터 압력강하의 약 40~80% 이상을 감소시켰다. 미생물 population 분포는 바이오필터 담체인 폐타이어담체와 입상 활성탄의 두 경우 모두 바이오필터 top 단에서 가장 낮았고 바이오필터 밑으로 내려갈수록 미생물 population이 커졌다. 한편 폐타이어담체는 입상활성탄 담체보다 월등히 큰 미생물 population을 나타내는 미생물 콜로니 개체수(CFU counts)를 보였다. 개선된 바이오필터에서 악취가스가 $bottom{\rightarrow}up$으로 공급되는 경우에 악취가스가 $top{\rightarrow}down$으로 공급되는 경우보다 미생물 population 성장이 더욱 컸으며, 입상활성탄 담체보다 폐타이어담체에서 이 현상이 더욱 두드러졌다. 전통적 바이오필터와 개선된 바이오필터시스템 각각의 미생물 population 분포도를 비교하였을 때에, 개선된 바이오필터의 미생물 population은 전통바이오필터보다 입상 활성탄 담체와 폐타이어담체의 경우에 각각 약 15배 및 2.5배 만큼 더 고르게 분포되었다.

• Communications for Statistical Applications and Methods
• /
• 제10권3호
• /
• pp.919-930
• /
• 2003

Mark-Recapture method for open population commonly use Jolly-Seber method. This method assumes that all animals are equally likely to be caught in each sample (the equal catchability). This objects are making introduction of Mark-Recapture method for open population and using the robust design that combine a open population method with close population method to solve upper problems. Then population growth rate estimators that are derived Pollock's Jolly-Seber parameters and Kendall's Jolly-Seber parameters are estimated.

• 한국BIM학회 논문집
• /
• 제9권1호
• /
• pp.22-31
• /
• 2019

In this paper, we construct a prototype model for city data prediction by using time series data of floating population, and use machine learning to analyze urban data of complex structure. A correlation prediction model was constructed using three of the 10 data (total flow population, male flow population, and Monday flow population), and the result was compared with the actual data. The results of the accuracy were evaluated. The results of this study show that the predicted model of the floating population predicts the correlation between the predicted floating population and the current state of commerce. It is expected that it will help efficient and objective design in the planning stages of architecture, landscape, and urban areas such as tree environment design and layout of trails. Also, it is expected that the dynamic population prediction using multivariate time series data and collected location data will be able to perform integrated simulation with time series data of various fields.

• Communications for Statistical Applications and Methods
• /
• 제15권5호
• /
• pp.783-791
• /
• 2008

Estimation procedure of the finite population proportion and distribution function is considered. Based on a logistic regression model, an approximately model- optimal estimator is defined and conditions for the estimator to be design-consistent are given. Simulation study shows that the model-optimal design-consistent estimator defined under a logistic regression model performs well in estimating the finite population distribution function.

• 대한인간공학회지
• /
• 제32권3호
• /
• pp.237-243
• /
• 2013

Objective: The present study developed an estimation method of boundary zone representative humanoids(hereafter, EBZ method) using descriptive statistics on the design target population. Background: The boundary zone method(hereafter, BZ method) generates representative humanoids at a boundary zone that statistically accommodates a designated percent of the design target population; however, the BZ method has a practical limitation because it requires a large scale anthropometric database on the design target population. Method: The EBZ method developed in the present study consisted of 3 steps. In the first step, the boundary zone of accommodating a designated percent(e.g., 90%) is formed under the assumption of normal distributions for anthropometric sizes. In the second step, cases that fall within the boundary zone are estimated using descriptive statistics(mean, standard deviation, and covariance) on the design target population. In the last step, K-mean cluster analysis is conducted for the cases, and representative humanoids are selected from each of clusters. Results: Evaluation results showed that mean accommodation percent of the EBZ method was 90.9%(range: 90.8~91.1%) which is similar to the target percent(90%). In addition, standard deviation of accommodation percent for 100 repetitions was 0.1%. Lastly, the number of representative humanoids generated by the EBZ method(n = 20) was similar to the BZ method(n = 16). Conclusion: The EBZ method can generate representative humanoids which accommodate a designated percent of the design target population using descriptive statistics. Application: The EBZ method can be utilized in the generation of humanoids for ergonomic design and evaluation of products when the large scale anthropometric database on the design target population is not existed.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.116-124
• /
• 1999

In most conventional design optimization of dynamic system, design sensitivities are utilized. However, design sensitivities based optimization method has numbers of drawback. First, computing design sensitivities for dynamic system is mathematically difficult, and almost impossible for many complex problems as well. Second, local optimum is obtained. On the other hand, Genetic Algorithm is the search technique based on the performance of system, not on the design sensitivities. It is the search algorithm based on the mechanics of natural selection and natural genetics. GA search, differing from conventional search techniques, starts with an initial set of random solutions called a population. Each individual in the population is called a chromosome, representing a solution to the problem at hand. The chromosomes evolve through successive iterations, called generations. As the generation is repeated, the fitness values of chromosomes were maximized, and design parameters converge to the optimal. In this study, Genetic Algorithm is applied to the actual dynamic optimization problems, to determine the optimal design parameters of the dynamic system.

• Journal of the Korean Statistical Society
• /
• 제35권3호
• /
• pp.239-250
• /
• 2006

A $2{\times}2$ crossover design including carryover effect is considered for assessment of population bioequivalence of two drug formulations in a Bayesian framework. In classical analysis, it is complex to deal with the carryover effect since the estimate of the drug effect is biased in the presence of a carryover effect. The proposed method in this article uses uninformative priors and vague proper priors for objectiveness of priors and the posterior probability distribution of the parameters of interest is derived with given priors. The posterior probabilities of the hypotheses for assessing population bioequivalence are evaluated based on a Markov chain Monte Carlo simulation method. An example with real data set is given for illustration.

• 상하수도학회지
• /
• 제19권6호
• /
• pp.749-757
• /
• 2005

The present study analyzed actual cases of designed flow estimation method and designed flow rate of sewage pipe lines. In order to examine the effects of peak-hour demand factor estimation with given daily highest peak loading, we analyzed its effects on designed flow rate with changing the peak-hour demand factor from 2.0 to 10.0. The results of this study are as follows. When reviewing the recent designs, we found that 59.4% of pipe line with 250mm and 300mm diameter, which fall under minimum allowable pipeline did not meet the minimum velocity which is specified as 0.6m/sec in design standards. The pipe line that have minimal access population or have very low slope did not satisfy the minimum velocity. In estimating the designed sewage flow, the applied daily highest peak loading and hourly highest peaking loading were the load factor for the entire population of the planned area, and for the peak loading of the initial pipes connected to a very small population, we applied the same factor as that applied to the entire area and, as a result, the hourly highest flow was underestimated. Because, in case of the initial pipes, the method of applying the same peak loading to all subject areas is highly possible to produce underestimated design flow, when estimating the designed flow of the initial pipes connected to a small population need to adopt a rational flow factor according to the size of population. For this, it is considered to investigate and analyze raw data on daily and hourly variation of sewage flow.

• 대한가정학회지
• /
• 제38권11호
• /
• pp.165-179
• /
• 2000

Korean population patters has become so called aged society by this July through the aged composed over 7% in whole population. It is worldly concern how can increase elderly people’s life satisfaction by providing homelike elderly housing facilities. The purpose of this study was to investigate the meaning of home, how to express the homelike characteristics into physical design and identify their housing satisfaction. The results were discussed and design ideas were suggested.