• 제목/요약/키워드: Deterioration phenomena

검색결과 84건 처리시간 0.025초

Corona 방전에 의한 Polyethylene의 표면열화현상 (Surface Deterioration Phenomena in Polyethylene under Corona Discharge)

  • 성영권;송진수;민남기
    • 전기의세계
    • /
    • 제24권5호
    • /
    • pp.82-90
    • /
    • 1975
  • This study investigated the deterioration phenomena of the Polyethylene surface contaminated with organic(Saccharose) or inorganic(NaCl) matters through electrical and optical experiments. And also these experimental results relatively well coincided with which was treated by theoretical process. On the electrical experiment, relation between electric field intensity in corona discharge and time reached to the breakdown, and relation between total amount of charges discharged and increment of applied voltage were investigated. On the optical experiment, discharge time dependence of surface deterioration rate and process of surface deterioration in the X-ray diffraction pattern were investigated. It was concluded that chemical effects by the corona discharge deteriorated insulation characteristics of Polyethylene surface.

  • PDF

승강기의 노후화 현상 조사 연구 (Deterioration of Elevator Components in Apartments)

  • 이기홍;서만선
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2007년도 춘계학술대회 논문집
    • /
    • pp.338-341
    • /
    • 2007
  • 본 논문에서는 공동주택에서 운전되고 있는 승강기의 노후화 현상에 대한 현장 조사를 실시하였다. 조사대상 승강기는 1990년도부터 시설된 교류제어방식 승강기와 1995년부터 설치된 인버터 승강기이다. 현장 조사 결과 승강기의 주요 노후화 현상은 누유, 마모, 부식 등인 것으로 조사되었다. 또한 승강기가 시설되고 8년이 되는 시점부터 고장 횟수가 크게 증가하는 것으로 분석되었다.

  • PDF

CLAD강의 DEBONDING 현상에 대한 연구(1) -열처리에 의한 clad강 계면의 강도 약화- (A Study on the Debonding Phenomena of Clad Steel(1) -Deterioration of Interfacial Strength in Clad Steel by Thermal Treatment-)

  • 윤중근;김희진
    • Journal of Welding and Joining
    • /
    • 제5권3호
    • /
    • pp.28-37
    • /
    • 1987
  • To clarify the debonding phenomena of clad steel, the effect of thermal treatment (temperature, holding time) on the interfacial strength of clad steel was preliminarily investigated. From this study, it was confirmed that the interfacial strength of clad steel was deteriorated by thermal treatment and the amount of strength deteriorated, depending on the condition of thermal treatment, could be evaluated by the following equation. ${\sigma}_{ HT}/{\sigma}_{i}/=A_{0}-A\;exp(-Q/RT)log(t/t_{0})$ This equation implies that temperature has a far strong effect on strength deterioration than tiem. The deterioration of interfacial strength of clad steel after thermal treatment may be derived from the thermal stress caused by the difference in thermal expansion coefficient between component materials and microstructural change along the interface.

  • PDF

Corona방전에 의한 유전체의 열화현상 (The Deterioration Phenomena for Dielectrics Causing Corona Discharge)

  • 성영권;백영학;차균현
    • 전기의세계
    • /
    • 제19권6호
    • /
    • pp.18-25
    • /
    • 1970
  • The object of this project is to manifest the mechanism of deterioration phenomena for dielectrics causing corona discharge and applies it for determine the standard corona detection technique. As the results, we observed that corona discharges may occur more strongly around cylindrical shape electrode in air than hemisphere shape electrode in vacuum, so that it depends on effects such as shape of the electrode, moisture, surface coditions, etc. According to observed the deterioration of dielectrics takes place in following stages. At first the attacked surface by an electron avalanche is uniformly eroded; then pits are formed; after that sharp channels are formed which lead to break-down as a treeing. The test are accelerated with higher frequencies by the cylindrical bar shape electrode in the pulse stright detection method more sensitive than Lissajous patterns. Lissajous patterns detection method is simple but usually insensitive and has disadvantage that the magnitude of the individual discharge is not measured.

  • PDF

고분자 절연재료에서 전기트리 열화 및 절연파괴 현상 (Electrical Treeing Deterioration and Dielectric Breakdown Phenomena in Polymeric Insulator)

  • 조영신;김상욱
    • 한국재료학회지
    • /
    • 제9권4호
    • /
    • pp.398-403
    • /
    • 1999
  • 폴리에틸렌과 에폭시 수지계 고분자 정연재료에서 발생하는 전기트리 열화 및 절연파괴 현상에 대해 연구하였다. 침-평판 전극구조를 갖는 블럭상 시편에 전기적 응력을 가하고 침 선단에서 발생하는 전기트리를 관찰하였다. 저밀도 폴리에틸렌에서 발생하는 전기트리 형상은 밀도가 매우 높은 부시상이었으며, 가교 풀려에틸렌에서는 가지형 전기트리가 관찰되었다. 에폭시 수지 에서는 첨가제 SN의 함량과 온도가 증가함에 따라 절연파괴 강도는 감소하였으며 전기트리는 더욱 복잡해졌다. 가교밀도가 높아 딱딱한 DGEBA/MDA 에폭시 수지계에서는 전도성 트리 경로 주위에 일련의 부채꼴 크랙이 관찰되었다.

  • PDF

무기계 표면침투제 용액으로 함침한 콘크리트의 특성 연구 (A Study on Characteristics of Concrete Impregnated with the Inorganic Surface Penetration Agents)

  • 배주성;김혁중;박국준;한종원
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제14권1호
    • /
    • pp.71-77
    • /
    • 2010
  • 콘크리트 구조물은 여러 가지 열화현상으로 내구성 및 건전성이 크게 저하되므로, 열화현상을 억제하는 것이 중요하다. 본 연구에서는 콘크리트의 열화현상을 억제하여 성능을 개선 시킬 수 있는 경제적이고 효율적인 표면침투제의 사용방법을 도출하기 위하여 표면침투제의 종류, 농도, 함침시간을 달리한 시험체의 점도, 표면장력, 압축강도, 내약품성, 내흡수량 및 염소이온 침투저항성 시험결과를 고찰하였다. 그 결과, 콜로이달 실리카 용액 및 소듐 알루미나 실리케이트 용액의 적정 희석 농도와 함침시간은 각각 15%, 5분 및 17%, 10초로 나타났다.

프랙탈 특성과 음향방출 계측법을 이용한 LDPE 시료에서의 트리잉 파괴진단에 관한 연구 (A Study On the Diagnosis Breakdown Using Fractal Characteristics and the Method of Acoustic Emission in Low Density Polyethylene)

  • 윤헌주;박재준;신승중;최재관;김성홍;김재환
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 하계학술대회 논문집 E
    • /
    • pp.1758-1760
    • /
    • 1997
  • Automatic detection system to detect acoustic emission pulse and fractal dimension were developed, to observe tree deterioration phenomena in LDPE. The purpose of our work are to use acoustic emission system and fractal dimension and to investigate the treeing phenomena in polymeric insulation under applied AC voltage 11[kV] with an artificial needle-shaped void(1.5[mm]) using the above system. We analyzed and phase angle-acoustic emission pulse amplitude-deterioration time ($\Phi$-AEA-t) pattern and phase angle-acoustic emission pulse number-deterioration time($\Phi$-AEN-t) pattern using statistical operators such as skewness, fractal dimension. In this paper show that the correlation of $\Phi$-AEA-t, $\Phi$-AEN-t, fractal dimension using regression analysis by the method of least squares can be used to predict the breakdown just before the breakdown occurs.

  • PDF

단일 복구조정활동 하에 단계적 퇴화를 가지는 단일기계 생산일정계획 (Single Machine Scheduling Problem with Step-deterioration under A Rate-modifying Activity)

  • 김병수
    • 산업경영시스템학회지
    • /
    • 제37권3호
    • /
    • pp.43-50
    • /
    • 2014
  • In this paper, we deal with a single machine scheduling problems integrating with step deterioration effect and a rate-modifying activity (RMA). The scheduling problem assumes that the machine may have a single RMA and each job has the processing time of a job with deterioration is a step function of the gap between recent RMA and starting time of the job and a deteriorating date that is individual to all jobs. Based on the two scheduling phenomena, we simultaneously determine the schedule of step deteriorating jobs and the position of the RMA to minimize the makespan. To solve the problem, we propose a hybrid typed genetic algorithm compared with conventional GAs.

알루미나계 자기애자의 장기 피로특성에 관한 연구 (Study on Long-term Deterioration Properties of Porcelain Insulators with Aluminous System)

  • 한세원;조한구;이동일;최인혁
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
    • /
    • pp.562-563
    • /
    • 2005
  • In case of aged porcelain, the failure in basic performance tests happened in cool-heat tests. Based on this characteristic, we studied the method predicting failure phenomena through more severe accelerated cool-heat ageing and accelerating thermal mechanical performance tests. Test results indicated that the thermal stress by temperature gradient was more severe parameter than thermal stress by quenching cycles within a category of standard or accelerating methods. And there is no the deterioration of statistic strength, but the deterioration of strength according to accelerating tests is serious.

  • PDF

대기환경변화를 고려한 콘크리트 구조물의 중성화 예측 (Prediction of Carbonation Progress for Concrete Structures Considering Change of Atmospheric Environment)

  • 이창수;윤인석
    • 콘크리트학회논문집
    • /
    • 제15권4호
    • /
    • pp.574-584
    • /
    • 2003
  • 도심지 환경에서 콘크리트 구조물의 열화를 일으키는 주요한 요인 중 하나는 중성화이다. 최근, 대기 중 $CO_2$농도와 온도가 크게 증가하는 지구 온난화 현상으로 인하여 중성화 열화환경도 더욱 심각해지고 있다. 본 연구에서는 IPCC에서 제안한 지구규모 대기환경 변화 시나리오인 IS92a를 토대로 향후 100년까지 대기 중 $CO_2$ 농도와 온도 상승율을 예측하였다. 질량보존의 법칙과 Fick의 1법칙을 기초방정식으로 하여 시간경과에 따른 콘크리트의 수화도, 콘크리트 열화에 미치는 각종 주요변수 등의 재료물성을 반영하였다. 또한, 서울시의 미세기후조건을 반영하기 위하여 추계학적 및 통계학적 기법을 도입하여 중성화로 인한 내구수명예측 기법에 반영하였다. 연구결과에 의하면 물-시멘트비가 큰 콘크리트에서 COS 농도증가로 인한 중성화 진행속도가 뚜렷히 빨라지는 것으로 나타났다. 그러나 물-시멘트비 55% 이하에서 충분히 양생된 보통 포틀랜드 콘크리트의 조건에서 중성화에 대한 우려가 높지 않을 것으로 생각된다.