• Proceedings of the Korea Database Society Conference
• /
• 1998.09a
• /
• pp.448-474
• /
• 1998

Data warehouse (DW) is important for analytical processing. Metadata is a key to its architecture. This paper proposes an architecture that consists of seven components. To illustrate data warehouse environment (DWE), this Paper proposes taxonomies having four flows. on the basis or the taxonomies and metadata, this paper proposes a methodology for building the data warehouse and metadata simultaneously. This integrated development methodology (IDM) consists of seven phases: (i) preparatory phase, (ii) requirement analysis phase, (iii) data warehouse development phase, (iv) operational data store development phase, (v) data mart development phase, (vi) metastore development phase, and (vii) maintenance phase. A metastore system is Proposed to help develop metadata interactively. An illustrative example is investigated to demonstrate the usefulness of IDM.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.3
• /
• pp.379-386
• /
• 2016

In this paper, phase noise analysis result for 2.4 GHz PLL(phase locked loop) using SPD(sample phase detector) is proposed. It can be used for high performance frequency synthesizer's LO(local oscillator) to extend output frequency range or for LO of offset PLL to reduce a division rate or for clock signal of DDS(direct digital synthesizer). Before manufacturing, theoretical estimation of PLL's phase noise performance should be performed. In order to calculate phase noise of PLL using SPD, Leeson model is used for modeling phase noise of VCO(voltage controlled oscillator) and OCXO(ovened crystal oscillator). After theoretically analyzing phase noise of PLL, optimized loop filter bandwidth was determined. And then, phase noise of designed loop filter was calculated to find suitable OP-Amp. Also, the calculated result of phase noise was compared with the measured one. The measured phase noise of PLL was -130 dBc/Hz @ 10 kHz.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.87-88
• /
• 2014

The paper presents a novel phase locked loop(PLL) control method for robust three-phase thyristor dual converters under sag, notch, and phase loss conditions. This method is applied to three line to line voltages of grid to derive three phase angle errors from three separated single-phase PLLs. They can substitute for abnormal phase to guarantee the synchronization in the various grid fault conditions. The performance of novel PLL with moving average method is verified through simulations.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1170-1175
• /
• 2009

When managers estimate exact construction cost at early stage and design phase, they can reduce construction cost in a more efficient way than to predict at construction stage. But, the current of public construction cost estimation and management is concentrated almost after detailed design phase. Therefore, construction cost management in design development phase to generally use approximate estimating is not correct. Also, the existing construction cost used the method that estimated by gross floor area-based cost estimates at design development phase. So, it is difficult to show the specific amount of materials and basis about the estimated cost of the construction. This study derived problems and limits of construction management at design development phase in case of public office building project through review of literature and current survey, and suggested estimating process model process of structural construction cost go improve these matters.

• Journal of Agricultural Extension & Community Development
• /
• v.23 no.4
• /
• pp.431-439
• /
• 2016

There are rural development policy for creating liveable rural. The support structure of the capacity phase of the Master Plan of Comprehensive Rural Village Development Project would that one. The support structure of the capacity phase has implied the assumption that the accumulated capacity of the village to the previous step will have a significant impact on the business to the next level. Rural development should be understood that simple: rather than for business applications, processes community is going to build capacity through continuous learning and practice. Its accumulated capacity should be possible to predict and then steps must be developed continuously for a long time, looking at the previous phase. Thus, according to the support structure of the capacity phase, it should be applied a causal relationship between the front and rear phase.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.5
• /
• pp.297-304
• /
• 2000

The motor for torpedo propulsion is needed the compact and short rating high power characteristics. This paper describes the development of the motor through the theory and Finite Element Method(FEM) analysis for Brushless Direct Current Motor(BLDCM) of 7 phase 6 poles. Back EMF, inductance and eddy current loss were analyzed. The proposed methods like magnetic wedge acquired by these FEM analysis were introduced. Phase-leading angle using encoder was used. Test results on the motor of 7 phase 6 poles were showed the validity of proposed methods and phase-leading angle.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.6
• /
• pp.824-831
• /
• 2019

For effective development in consideration of the maintainability of the weapon system, it is necessary to understand whether the maintainability design requirements are satisfied at the early phase of development. This requires the application of an early design phase maintainability prediction process to provide opportunities for improvement. By defining the ambiguity group definition, fault isolation level, fault isolation probability, and countermeasures for faults, it was possible to predict early phase development. The MTTR of the initial design phase applying Procedure V to the artillery system was 3.46H, which is about 16 % higher than 2.98H, the MTTR using Procedure II. This is a result of system design ambiguity that has not been specified in the early phase of development.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.680-687
• /
• 2014

PGA(phase gradient autofocus) has been widely used to remove motion induced phase errors in the ISAR(inverse synthetic aperture radar) imaging. The critical process for the processing time and image quality is windowing stage in PGA. In this paper, the new method to determine window size based on polynomial least square approximation is proposed. Moreover, dominant range bins are selected for efficient phase error estimation, which improve image quality and speed up convergence. The simulation results show that the proposed algorithm provides high quality ISAR images while computational efficiency of inherent PGA is retained.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.413-420
• /
• 2017

We investigate the performance of a true time delay(TTD) phase shifter to reduce the beam squint caused by frequency changes of a phased array antenna in wideband communication systems. To design a high gain phased array antenna, we need a long TTD, which causes high RF loss, low resolution and large dimension of TTD phase shifters. To overcome the problems, we propose a schematic of dual TTD phase shifters, which consists of short time delay(STD) in radio frequency(RF) part and long time delay(LTD) in intermediate frequency(IF) part. Our analysis results show that the proposed scheme reduces the required bits and delay time in RF band of the TTD compared to the conventional single TTD scheme.

• ETRI Journal
• /
• v.23 no.4
• /
• pp.199-201
• /
• 2001

The phase noise reduction in a configuration of the HEMT oscillator with a dielectric resonator coupled by a quarter-wavelength impedance inverter is investigated. Two HEMT oscillators for a satellite payload system are manufactured in the same configuration except for the coupling configuration of the dielectric resonator (DR) in order to empirically demonstrate the phase noise reduction. Experimental result shows that a phase noise reduction by 14 dB can be enhanced by increasing the characteristic impedance of a coupling microstrip impedance inverter.