• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.14-19
• /
• 2010

In this paper, a novel architecture for device miniaturization of multimode interference-based couplers (MMICs) is proposed by replacing conventionally designed MMICs by cascaded two-section stepped-width or stepped-index MMICs. For the 82% cross coupling efficiency in a stepped-width MMIC, the coupling length of device results in just 6.7% length reduction. However, for a stepped-width and stepped-index MMIC, the coupling efficiency increases to 93% and the length reduction of 9% occurs. Furthermore, with additional incorporation of tapered devices, it shows that a compact MMIC can be designed in which the coupling efficiency is 90% and the length is reduced to 25%.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.25-30
• /
• 2008

In this paper, a novel architecture for device miniaturization of multimode interference-based (MMI) couplers is proposed. The coupling length of $N{\times}N$ MMI couplers scales as the square of the MMI region width so that the use of these structures with large-N ports can require large chip size. To solve the design problem, the butterfly grating-assisted MMI couplers, that have smaller device dimensions than conventional MMI couplers, are discussed and evaluated. Numerical simulations and novel design rules for such structures derived through theoretical analysis are presented.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.919-926
• /
• 2021

In this paper, a study was conducted on the miniaturization of an e-Mobility battery charger module using GaN-FET. GaN-FET is one of the types of WBG devices, and it is a device that exceeds the performance of existing Si power semiconductors. In particular, GaN-FET has the advantage of small packaging size and high switching frequency operation, which is advantageous for miniaturization of power converters. Therefore, a bidirectional DC/DC converter module for e-mobility charging using GaN-FET was developed. To apply to the converter to be developed, analysis is performed on the characteristics of GaN-FET, and after manufacturing a prototype of a bidirectional DC/DC converter module, the efficiency and temperature data of the power converter are analyzed to verify its feasibility.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.445-446
• /
• 2012

Recently the interest in wireless power transfer have been studied. ECR (Electromagnetic Coupled Resonance) device, depending on the size of the frequency characteristics of the structure, increasing in volume and larger volume of wireless power transmission device to make use of ECR is a big barrier. So to solve this problem for ECR device miniaturization and high efficiency has been actively studied. In this paper, the size of the device for ECR IM (Impedance Matching) by applying a one-turn coil circuit, remove the device in the form of ECR Network Analyzer measured by removing the one-turn coil has demonstrated the possibility of the device in the form of ECR.

• International Journal of Railway
• /
• v.8 no.1
• /
• pp.10-14
• /
• 2015

Due to the characteristics of the vehicle structure, the magnetic levitation train has a confined bottom space thus a study on miniaturization and weight reduction of auxiliary power unit is essential. This auxiliary power unit is an essential device used for illumination, air conditioning, heating and air brake equipment excluding the motor. The previous auxiliary power unit for magnetic levitation train has used the hard switching having a high switching frequency with heavy loss in order to reduce the size of filter reactor and transformer but the reduction in volume was not significant. In this paper, by reducing the loss, reducing the size of the cooling unit and by increasing the switching frequency using the soft switching of resonant converter, it has miniaturized and reduced the weight of filter reactor and transformer which occupy significant space in the auxiliary power unit. This study has verified the performance of 50KVA grade prototype through simulated interpretation and analysis, and compared the size and weight of auxiliary power unit of the previous magnetic levitation train.

• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.250-257
• /
• 2005

Respiratory tubes with the length of 35 mm and the diameter of 10, 15, and 20 mm were made and both the static($P_{S}$) and dynamic($P_{D}$) pressures were measured for steady flow rates ranging 1-12 l/sec. Regression analysis resulted successful fitting of $P_{S}$ and $P_{D}$ data with quadratic equations with correlation coefficients higher than 0.99. The measurement standards of the American Thoracic Society (ATS) were applied to $P_{S}$ data, which demonstrated the smallest tube diameter of 15 mm to satisfy the ATS standards. The maximum $P_{D}$ value of the velocity type transducer with the diameter of 15 mm was estimated to be 75 cm$H_{2}O$, implying approximately 7 times larger sensitivity than the widely used pneumotachometer. These results showed that the velocity type respiratory air flow transducer is a unique device accomplishing miniaturization with the sensitivity increased, thus would be of great advantage to develop portable devices.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.8
• /
• pp.592-599
• /
• 2003

As one of the Principal modalities of human sensation, tactile feel is prerequisite for building wide variety of applications such as telemanipulation, virtual reality and medical engineering. A dynamic Braille display device based on a polymer actuator is presented. The actuator, often called artificial muscle actuator has advantageous features over the existing methods in terms of intrinsic softness, ease of fabrication, cost-effectiveness and miniaturization. The principles of actuation with dielectric elastomer is introduced, and necessary considerations on the design of a tactile display device are discussed. The design of the device is described in detail including the fabrication process and driving electronics. Also, preliminary results of experiments are given to evaluate its performance.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.11
• /
• pp.875-881
• /
• 2003

The received signal of a mobile phone is normally sensed through two independent means which are the sound generation of a speaker and vibration generation of a vibration motor. As an improvement scheme to meet the consumer's demand on weight reduction and miniaturization of a mobile phone, the design and development of an integrated vibration and sound generating device are performed in this research. To this purpose, the optimal shapes of the voice coil. the permanent magnet and the vibration plate are designed, and the excitation force applied to the vibration system of the new device is estimated and verified through theoretical analyses, computer simulation, and experiments using an expanded model. In addition, vibration performance comparison of the device with the existing vibration motor is performed, and from the overall process, therefore, the method and procedure for the vibration performance analysis of the integrated vibration and sound generating device are established.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.840-844
• /
• 2013

In this study, we try to estimate vascular compliance for management vascular disease. Because It is known the vascular compliance represents the state of the blood vessels. In general, the vascular compliance is estimated using an acceleration photoplethymogram from measured by photoplethymogram-based. The acceleration photoplethymogram is come from second derivative of photoplethymogram. By using the acceleration photoplethymogram, we can estimating vascular compliance, vascular age, vascular state. In this study, for measuring acceleration photoplethymogram we have developed a measurement device having analog filters. It has the advantage of miniaturization, low-power because it is simpler than digital filters. Using the developed device, we have estimated vascular compliance and tested the reliability of our device compare with conventional device having digital filters. As a result.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.9
• /
• pp.78-85
• /
• 2008

Piezoelectric materials have been investigated as vibration energy converters to power wireless devices or MEMS devices due to the recent low power requirements of such devices and the advancement in miniaturization technology. Piezoelectric power generation can be an alternative to the traditional power source-battery because of the presence of facile vibration sources in our environment and the potential elimination of the maintenance required for large volume batteries. This paper represents the new power source which supplies energy device node. This system, called "energy harvesting system", with piezo materials scavenges extra energy such as vibration and acceleration from the environment. Then it converts the mechanical energy scavenged to electrical energy for powering device This paper explains the properties of piezo material through theoretical analysis and experiments The developed system provides a solution to overcome the critical problem of making up wireless device networks.