• 융합신호처리학회논문지
• /
• 제11권1호
• /
• pp.9-12
• /
• 2010

본 논문은 재난 감시를 위한 디지털 미디어 프로세서 기반의 적외선 열화상 처리 시스템의 설계 및 구현에 대하여 기술한다. 디지털 열화상 처리 보드는 DM642 디지털 미디어 프로세서와 비디오 인코더, 비디오 디코더 상용 칩을 기반으로 설계하고 구현하였다. 또한, 재난 감시 기능은 적외선 열화상의 온도분포를 분석하고 화재발생과 같은 재난상황을 감시하는 알고리즘을 구현하였으며, 적외선 열화상 입력은 $320\;{\times}\;240\;{\mu}$-bolometer 타입의 적외선 열화상 카메라를 사용하였다. 구현된 시제품의 시험 평가 결과, 10 프레임/초의 처리 속도로 요구되는 적외선 열화상 분석과 화재 검출 기능이 잘 동작 하였으며 구현 시스템의 실용성을 확인하였다.

• 방송공학회논문지
• /
• 제18권4호
• /
• pp.550-558
• /
• 2013

가시광 영상과 원적외선 영상은 각각 질감 정보와 열 정보를 가지므로 서로 다른 정보를 표현한다. 그러므로 가시광 영상 개선을 위해 가시광 영상의 정보만을 이용하는 것보다 가시광 영상에서 존재하지 않는 원적외선 영상의 열 정보를 이용하는 것이 보다 좋은 결과를 얻을 수 있다. 본 논문에서는 원적외선 영상을 이용한 효과적인 가시광 영상 개선을 위해 가시광 영상에서 개선이 필요한 정도에 따라 가중치 맵을 만든다. 가중치 맵은 채도와 밝기를 이용하여 계산하며 원적외선 영상에서 열 정보를 고려하여 값을 조정한다. 마지막으로 조정된 가중치 맵을 이용하여 원적외선 영상의 정보와 가시광 영상의 정보를 융합함으로써 두 영상의 정보를 효과적으로 포함한 결과 영상을 생성한다. 실험결과에서는 가시광 영상에서 개선이 필요한 영역을 원적외선 영상 정보와의 융합으로 원본의 가시광 영상보다 향상된 결과를 보여준다.

• 한방재활의학과학회지
• /
• 제27권3호
• /
• pp.107-115
• /
• 2017

Objectives This study is planned to classify correlation between HIVD of L-spine MRI and Digital Infrared Thermal Image (DITI). Methods We measured the temperature of both leg whose 120 men and 116 women patients with lumbar pain in Bucheon Jaseng Korean Medicine Hospital. And We use Magnetic Resonance Imaging (MRI) for classifying the patients who has lumbar intervertebral disc or not. Results 1) There was no statistical relation between difference of both leg's temperature and gender (p>0.05). 2) There was meaningful statistical relation between difference of both leg's temperature and age (p<0.05). 3) There was meaningful statistical relation between direction of HIVD of L-spine and direction of temperature reduction. 4) There was meaningful statistical relation between the severity of HIVD of L5/S1 and degree of temperature reduction. But there was no statistical relation between the severity of HIVD of L3/4, L4/5 and degree of temperature reduction. Conclusions We can use Digital Infrared thermal image (DITI) on low back pain patients for diagnosis. But we should not use DITI alone. DITI has limit in diagnosis.

• 한국산학기술학회논문지
• /
• 제1권2호
• /
• pp.27-31
• /
• 2000

대상 물체의 온도분포를 해석하고 계측하기 위해 열상 장비가 구현된다. 시스템의 주요한 부분은 초점면 배열 형태의 센서가 적용된 열상 카메라이다. 적용된 열상 센서는 중파장 적외선 영역의 신호를 검출하며 열상을 형성하기 위한 기본 신호를 출력한다. DSP가 활용되어 센서 신호처리를 통해 열상을 구성하고 NTSC 신호 및 디지털 신호 출력을 한다. 열상의 화질을 개선하기 위해 이점 교정법을 적용한다. 이는 낮은 온도와 높은 온도를 기준으로 하여 초점면 배열 센서 화소 신호의 공간적인 비균일함을 교정하는 것으로서 실험 결과를 통해 열상의 화질이 개선됨을 보인다.

• 한국농공학회논문집
• /
• 제52권2호
• /
• pp.67-73
• /
• 2010

Unlike Urban building, horticultural facilities has a lot of heat loss through plastic or glass covering material which could be much influential to growing plant and consuming energy for heating greenhouse. In many cases, heat loss from a break of cover, a gap of joint sealing, the entrance to greenhouse and windows for ventilation are the main factors considered in calculating the heating load for horticultural facilities. however the normal observation through human eye and digital camera could not recognize where the heat loss occurred. but the infrared thermal image camera with detecting thermal difference could be very effective for noticing heat loss by analyzing infrared thermal image. In this study, greenhouse structure, covering material, internal and external provisions for Horticultural facilities were surveyed in different sites and Infrared thermal camera shooting and image analysis were performed for auditing heat loss from cultivation facilities The results from this study were that unexpected heat loss had been noticed in 7 representative cases of greenhouse such as side wall covered with single or double plastic, and the joint of horizontal thermal curtain, roof without horizontal thermal curtain, entrance to greenhouse, windows for ventilation. the most important factors for keeping heat energy were whether the horizontal thermal curtain with multifold thermal material was installed or not. The internal or external covering using multifold thermal curtain proved to be the most effective ways to keep heat energy from losing through heat transmission, heat radiation. from inside to outside the horticultural facilities.

• 제어로봇시스템학회논문지
• /
• 제6권5호
• /
• pp.396-403
• /
• 2000

A thermal imaging system is implemented for the measurement and the analysis of the thermal distribution of the target objects. The main part of the system is a thermal camera in which a focal plane array typed sensor is introduced. The sensor detects the mid-range infrared spectrum of target objects and then it outputs a generic video signal which should be processed to form a frame thermal image. Here, a digital signal processor(DSP) is applied for the high speed processing of the sensor signals. The DSP controls analog-to-digital converter, performs correction algorithms and outputs the frame thermal data to frame buffers. With the frame buffers can be generated a NTSC signal and transferred the frame data to personal computer(PC) for the analysis and a monitoring of the thermal scenes. By performing the signal processing functions in the DSP the overall system achieves a simple configuration. Several experimental results indicate the performance of the overall system.

• Journal of Acupuncture Research
• /
• 제18권1호
• /
• pp.1-13
• /
• 2001

The Background and Purpose : Most diagnostic method for the facial palsy were invasive and complex. And we don't know very well prognosis for the recovery of facial palsy in the first stage after the onset. But the Digital Infrared Thermal Image(DITI) isn't invasive and complex diagnostic method for the facial palsy. So we should study on the clinical prognostic diagnosis of Bell's palsy among facial palsy with the DITI. Objective and Methods : This study researched into the clinical statistics for 89 case who are in Bell's palsy, and they are treated with oriental medical care at the Woosuk university during 2 years form November 1998 to October 2000. All objectives have the Grade 6(Zero state) of Bell's palsy in first week after the onset. It takes a patient's facial temperature after the onset. Group A is taken from 1 day to 4 days after the onset. Group B is taken from 5 day to 8 days after the onset. And group C is taken from 9 day to 12 days after the onset. Results and Conclusions : The Digital Infrared thermal image technique showed the more high temperature, the more rapid cure and short treatment period on TE23, B2, S3, S6 in abnormal site of Bell's palsy. But it showed the more low temperature, the more rapid cure and short treatment period on TE17 of abnormal site of Bell's palsy. As a conclusion, we could think that the prognostic diagnosis of Bell's palsy closely related with the thermal difference normal and abnormal site of Bell's palsy that were took picture after the onset.

• 센서학회지
• /
• 제27권5호
• /
• pp.300-305
• /
• 2018

The uncooled microbolometer thermal sensor for low cost and mass volume was designed to target the new infrared market that includes smart device, automotive, energy management, and so on. The microbolometer sensor features 80x60 pixels low-resolution format and enables the use of wafer-level vacuum packaging (WLVP) technology. Read-out IC (ROIC) implements infrared signal detection and offset correction for fixed pattern noise (FPN) using an internal digital to analog convertor (DAC) value control function. A reliable WLVP thermal sensor was obtained with the design of lid wafer, the formation of Au80%wtSn20% eutectic solder, outgassing control and wafer to wafer bonding condition. The measurement of thermal conductance enables us to inspect the internal atmosphere condition of WLVP microbolometer sensor. The difference between the measurement value and design one is $3.6{\times}10-9$ [W/K] which indicates that thermal loss is mainly on account of floating legs. The mean time to failure (MTTF) of a WLVP thermal sensor is estimated to be about 10.2 years with a confidence level of 95 %. Reliability tests such as high temperature/low temperature, bump, vibration, etc. were also conducted. Devices were found to work properly after accelerated stress tests. A thermal camera with visible camera was developed. The thermal camera is available for non-contact temperature measurement providing an image that merged the thermal image and the visible image.

• 문화기술의 융합
• /
• 제8권2호
• /
• pp.329-336
• /
• 2022

양피지로 만들어진 고문서에 필사된 후 오랜 시간동안 부식되고 자연 훼손되어 해독하기 어려운 거란문자를 문서를 손상시키지 않으면서 비접촉방식으로 가시화하기 위해 능동형 적외선 열화상 기술을 개발하였다. 문서 표면에 할로겐 램프를 이용하여 광대역 적외선을 정현파 형태로 변조/입사시키면서 서체 부분과 기록용지 표면으로부터 차별적으로 방사되는 적외선을 영상화함으로서 훼손되어 잘 보이지 않는 고대 글자를 가시화 하였다. 능동형 적외선 영상으로부터 거란 문자로 추정되는 문자들을 기존의 광학영상이나 적외선 영상보다 명확하게 판독할 수 있었으며 그 결과로서 영어 알파벳의 'd' 음가를 가지는 거란문자인 ' '나 'ri' 발음의 거란문자인 ' '를 포함하여 다양한 거란문자를 확인할 수 있었다. 이로서 본 연구를 통해 개발된 능동형 적외선 기술이 향후 고문서 자료의 디지털 복원과 보존에 능동형 적외선 열화상기술이 효과적으로 활용될 수 있을 것으로 기대된다.

• 한국의류학회지
• /
• 제43권4호
• /
• pp.592-604
• /
• 2019

This study examines the stealth function of sputtered fabric with an infrared thermal imaging camera in terms of the thermal and infrared (IR) transmittance characteristics. Various base fabrics were selected, infrared imaging was performed, and infrared transmittance was measured. By infrared camera experiment it was found that the sample was concealed because it had a similar color to the surroundings when the aluminum layer was directed toward the outside. In addition, a comparison of the infrared thermographic image of the untreated sample and the sputtered sample in the laboratory showed that the difference in ${\Delta}E$ value ranged from 31 to 90.4 and demonstrated effective concealment. However, concealment was not observed in the case of the 3-layer (Nylon-Al-Nylon) model when a sputtered aluminum layer existed between two nylon layers. The direction of the sputtering layer did not affect the infrared transmittance in the infrared transmittance experiment. Therefore, it seems better to interpret the concealing effect in the infrared thermographic images by using thermal transfer theory rather than infrared transmittance theory. We believe that the results of this study will be applicable to developing high performance smart clothing and military uniforms.