• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.156-162
• /
• 2011

The control loop time delay caused by sampling, the zero-order-holder effect and calculations is inevitable in the digital control of dc-dc switching converters. The time delay will limit the bandwidth of the control loop and therefore degrade the transient performance of digital systems. In this paper, the quantization time delay effects with different time delay values based on a generic second-order system are analyzed. The conclusion that the bandwidth of digital control is reduced by about 20% with a one cycle delay and by 50% with two cycles of delay in comparison with no time delay is obtained. To compensate the time delay and to increase the control loop bandwidth, a duty ratio predictive control scheme based on linear extrapolation is proposed. The compensation effect and a comparison of the load variation transient response characteristics with analogy control, conventional digital control and duty ratio predictive control with different time delay values are performed on a point-of-load Buck converter by simulations and experiments. It is shown that, using the proposed technique, the control loop bandwidth can be increased by 50% for a one cycle delay and 48.2% for two cycles of delay when compared to conventional digital control. Simulations and experimental results prove the validity of the conclusion of the quantization effects of the time delay and the proposed control scheme.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.2
• /
• pp.83-90
• /
• 1994

The container crane is still operated by skillfull human operators. So an automatic crane operation system is strongly required. In this paper, the digital control method is applied to position an anti-swing control for container crane. Two methods of digital optimal regulator control and digital redesign control are used for experiment. From these experimental results, it is respected that both methods can be applied effectively to an actual container crane operation.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.410-417
• /
• 2009

This paper represents a design and implementation of a digital controller for a multi-phase synchronous buck converter (SBC) using a digital signal processor (DSP). The multi-phase SBC has generally been used for a voltage regulation module (VRM) of a microprocessor because of its high current handling capability at a low output voltage. The VRM requires high control performance of tight output regulation, high slew rate, and load sharing capability of multiple converters. In order to achieve these requirements, the design and implementation of a digital control system for a multi-phase SBC are presented in this paper. The digital PWM generation, current sensing, and voltage and current controller using a DSP TMS320F2812 are considered. The experimental results are provided to show the validity of the implemented digital control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.909-914
• /
• 1988

The structure of a digital controller based on modern control theory is more complex than that of a PID controller. In implementing the digital control of an actual system by using the digital controller, we often encounter gaps between theory and practice e.g. quantization error, sampling error, modeling error, contaminated noise etc. In such cases, simulator plays an important role in detecting difficulties. This paper demonstrates the importance of the computer simulator for designing a digital controller. The controller and the simulator are constructed by different computer respectively, with a link between the blocks by analogue signals through the A/D, D/A converters. Through the simulator test, we can evaluate the digital controller; identify and solve difficulties in the digital control. The controller, which pasted the simulator test, is used identically in the actual system. This was a successful procedure for designing the controller. As an example, we successfully constructed the digital controller using the computer simulator for inverted pendulum control. We then compared the control results of simulator and actual equipment. Furthermore we commented on the construction of the computer simulator which exactly expressed the actual system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.1
• /
• pp.13-22
• /
• 2010

In this paper, we propose a management system for positioning and indicating the surveyed control point using RFID and UMPC. This system is composed of digital control point, management system and application. The digital control point transmits information of the surveyed control point and the management system receives the data from the digital control points and manages the scattered digital control points. The system offers three services for managing the surveyed control point. The first service is control point monitoring service for identifying the change of location, locating the missing control point and the second service is control point search service notifying selected control point to user, and the third service is control point land management service for editing the control point information in the land. Therefore, this system makes it easy for administrators to access the control point information of the scattered surveyed control point through the country and enhances the managing efficiency.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.317-321
• /
• 1991

In recent years, the discrete-data and digital control systems have gained importance in all industies due in part to the advances made in microcomputers, as well as the advantages found in working with digital signals. So, the developments of the computer aided design packages to analysis, control law design and digital implementation of control systems are increasingly needed and those substantial technological improvements are now expected. In the paper, a real time control program package(RTCPP) for the implementation of digital control is developed by using C language. The digital controls for the feedfoward and feedback controllers such as PI(propotional and Integration) type, regulator and servo types can be implemented by an IBM PC compatible computer with some interface modules of A-D/D-A converter and RS-232C. The effectiveness of RTCPP is illustrated by the application controls for motor and magnetic levitation systems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.144-148
• /
• 2004

This thesis also proposes an applied digital exciter control system for a synchronized generator using a digitally PSS controller. Experiment results show that the digital control system manifests excellent control performance compared to analog control systems. It has also been confirmed that it is easy for the modern control theory to implement digital control.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.7
• /
• pp.868-875
• /
• 1999

In this paper, digital motor control center using protection relay is developed in order to protect power systems by means of timely fault detection and diagnosis during operation for induction motor which have various load environments and capacities in power systems. Digital motor control center is employed by power supervisory control systems without separate remote terminal unit and transducers adding communicational ability. Also we develope a maximum demand controller to control the load effectively at peak status and a power factor controller to minimize real power losses and improve the power factor. Therefore, when using the developed controller, real time computation is possible by loading DSP in hardware and applying real-time kernel which can convert each algorithm to task module.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.10
• /
• pp.637-645
• /
• 2000

This study was represented the improvement of the flexible position control for linear motion of hybrid type linear pulse motor(HLPM). The driving method used a minute 125 microstep drive instead of full step drive method. The digital control method was applied to the PI control for more stable position control, at this time the PI control parameters have gained by a Ziegler-Nichols turning method. The loop transfer function of control system was combined with both motor transfer function and digital PI control equation. Such, the proper for digital PI control system is verified to through the simulation and experimental result of the stability step response and bode plot with proper gain and phase margin.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1283-1288
• /
• 2003

This paper proposes an approach to attitude control artificial satellites with jet-engine. The jet-engine produces on-off thrust, which can be modelled as pulse-width-modulated (PWM) function. Therefore, the problem is converted to design a PWM controller and we develop an efficient technique for this purpose using digital redesign. The digital redesign is a converting technique a well-designed analog controller into the equivalent digital one maintaining the property of the original analog control system in the sense of state-matching. The redesigned digital controller is again converted into PWM controller using the equivalent area principle. We show a computer simulation of the attitude control of artificial satellites.