• Fashion & Textile Research Journal
• /
• v.4 no.2
• /
• pp.198-202
• /
• 2002

Degummed silk from Bombyx mori was dissolved in 9.3M lithium bromide solution. The regenerated silk fibroin films were completely ${\alpha}$-randomcoil type as shown by x-ray diffraction and infrared spectroscopy. The structural changes in silk fibroin induced by immersion into methanol and dilute hydrochloric acid and its photo-yellowing effect was studied. The changes of crystallinity were measured by infrared spectrometer. Yellowness index caused by ultraviolet irradiation were observed as a function of the structural change on silk fibroin. On treatment with methanol, ${\alpha}$-randomcoil silk film is converted to the ${\beta}$-form structure. After the treatment of hydrochloric acid on ${\beta}$-form structure in silk induced by immersion into methanol, ${\beta}$-form in silk fibroin is partially decreased. Crystallization owing to ${\beta}$-form transition reduced the initial yellowness index by ultraviolet irradiation. A little ${\beta}$-form structure in silk fibroin increased the initial yellowness in comparison with more ${\beta}$-form structure.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.329-333
• /
• 2016

Disinfection by electrolysis would be useful for small wastewater treatment plant, combined sewer overflow, ballast water, swimming pool, and fish farming, where the transport, storage, and the use of chlorine gas is limited. This study investigated the feasibility of the electrolysis of dilute hydrochloric acid (HCl) for disinfection. The effects of HCl concentration, voltage and reaction time on the generation of oxidizing agents, HOCl, $O_3$, and $H_2O_2$, were examined in a series of batch test. The highest current efficiency was 99.3% which was found at 2.2%, 3 V, and 5 min of HCl concentration, voltage, and reaction time, respectively. Continuous electrolysis at 2.2% HCl, 3 V, and 5 min of the hydraulic retention time showed 97.4% of the current efficiency. Addition of sodium chloride up to 20 g/L linearly increased the oxidizing agents production. 92.2% of total coliforms were removed by the contact with the electrolyzed water.

• Journal of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.309-314
• /
• 1984

The species and equilibria of uranium and vanadium have been investigated in the various concentration of perchloric, hydrochloric and sulfuric acid by anion exchange chromatography. In the concentration range of $0.01\;{\sim}\;0.5M$ hydrochloric and $0.01\;{\sim}\;0.5M$ perchloric acid, uranium seems to be $UO_2^{2+}$species and in higher concentration than 0.5M hydrochloric acid $UO_2^{2+}$seems to form the chloride complex ion as $UO_2Cl^+$, $UO_2Cl_2$, $UO_2Cl_3^-$ and $UO_2Cl_4^{2-}$ according to the increase of the hydrochloric acid concentration. In the dilute(0.01N) sulfuric acid the adsorbability of uranium on anion exchange resin is strong and then decreases with increasing the sulfuric acid concentration. From this result we conclude that $UO_26{2+}$ formed the complex ion as $UO_2(SO_4)_2^{2-}$. In the perchloric acid of $0.01\;{\sim}\;0.5N$ concentration the existing equilibrium of vanadium and its constant calculated at $20^{\circ}C$ is $1.9{\times}108$ for $H_2V_{10}O_{28}^{4-}$ + $14H^+$ = $10VO_2^+ + 8H_2O$. The elution behaviors of vanadium in the hydrochloric and sulfuric acid are smiliar to those in perchloric acid.

• Analytical Science and Technology
• /
• v.36 no.6
• /
• pp.259-266
• /
• 2023

The demand for rare-earth elements (REEs) is increasing owing to their significance as prominent materials in electronics, high-tech industries, geological research, nuclear forensics, and environmental monitoring. In general, the utilization of REEs in various applications requires the use of chromatographic techniques to separate individual elements. However, REEs have similar physicochemical properties, which makes them difficult to separate. Recently, several studies have examined the separation of REEs using LN resin as the stationary phase and aqueous nitric acid and hydrochloric acid solutions as eluents. Using this method, light REEs have been separated using dilute acid solutions as the eluent, whereas heavy REEs are separated using solutions with high acid concentrations. To increase the separation resolution between different REEs, either the column length or resin size is changed. In addition, the suggested methods are implemented to decrease the analysis time. This review presents technical information on the chromatographic separation of REEs using the LN resin and discusses the optimal experimental conditions.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.38-44
• /
• 2001

The adsorption ability of dyes on chitin, a natural polymer was investigated for decolorization of dye wastewater. Chitin was manufactured in lab by decalcification in dilute aqueous hydrochloric acid solution and deproteination in dilute aqueous sodium hydroxide solution with shrimp shells. Absorbance of residue solution of dyebaths after dye adsorptions of chtin were measured in varieties of dye concentration and dipping periods. Three kinds of Direct dyes -C.I. Direct Red 81 (red 81), C.I. Direct Brown l(brown 1) and C.I. Direct Green 26(green 26) - were used. Red 81 and brown 1 have smaller molecular weight than green 26. The results from experimentals were of]tamed as follows: 1) Adsorption of green 26 was improved in dyebath by addition of salt, but red 81 and brown 1 were not found any improvements. 2) Smaller size of chitin particles could be absorbed much more speedy. In this experiments, the smallest range of chitin particle size was $250\mu{m}$ and less. 3) The most efficient amount of chitin for 20m1 of dyebath was 0.2g, 4) Both of red 81 and brown 1 showed good and speedy adsorption abilities as dyestuffs of over 90 percent in just one minute in dyebath of 0.01% dye concentration. But green 26 was absorbed slowly because of its large molecular weight. It took 40minutes to absorb dyestuffs of over 90 percent in dyebath of 0.01% dye concentration.

• Journal of Environmental Health Sciences
• /
• v.24 no.3
• /
• pp.11-17
• /
• 1998

Chitin is known as biodegradable natural polymer. In spite of various application of chitin derivatives from waste marine sources, commercial use of chitin has been limited due to high resistance to chemicals and the absense of proper solvents. We chitin prepared through the decalcification, bleaching and deproteination from Protunus trituberculatus shells by change of Hackman's method. Also, Microcrystalline chitin made by hydrolysis that was reduce made of resistance solvents used by dilute hydrochloric acid, ultrasonic and hydrogen peroxide. Crosslinked chitin derivatives were preparaed from chitin with crosslink agents(epichlorohydrin, 1,3-dichloropropanol) follwed by crosslinkage at 6C position. The effects of these parameters on chitin dervatives were invastigated by IR, DSC, XRD, BET, PSA and SEM. SEM analysis showed that both chitin and crosslinked chitin had a particle shaped morphology.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.1
• /
• pp.1-5
• /
• 1999

The bioavailabilities of baicalin in water, oil, w/o and o/w emulsion were evaluated in rats. The dissolution rate of baicalin in o/w emulsion was smaller than those of w/o form in dilute hydrochloric acid solution (pH 1.2) and in PBS (pH 6.8). The absorption rate of baicalin from w/o emulsion was smaller than that of o/w emulsion in the different parts of rat intestine of the rats. Following oral administration in rats, the $C_{max}$ of baicalin from water phase, oil phase, o/w wand w/o emulsion were 2.11, 0.61, 1.57, and $1.35\;{\mu}g/ml$, respectively. The relative bioavailability of w/o emusion was 129 % when it was compared with water phase. This result suggests that the improvement of bioavailability for baicalin in w/o emulsion might be practically available.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.1
• /
• pp.44-56
• /
• 1997

Influence of electrochemical etching conditions on capacitance gain of aluminium electrolytic on capacitor foil has been investigated by etching cubic textured high purity aluminum foil in dilute hydrochloric acid. Uniformly distributed etch pit tunnels on aluminum surface have been obtained by pretreatment aluminium foil in 10% NaOH solution for 5 minutes followed by electrochemical etching. Electrostatic capacitance of etched aluminium foil anodized to high voltage increased with the increase of current density, total charge, temperature and concentration of electrolyte up to maximum CV-value and then deceased. Election optical observation of the etched foil revealed that the density of etch of etch pits increased with the increase of current density and concentration of electrolyte. this increase of etch pit density enlarged of the increase of capacitance. However, abnormal high current density and high electrolyte concentration induced the local dissolution of the foil surface which resulted the decrease of foil capacitance.

• YAKHAK HOEJI
• /
• v.13 no.2_3
• /
• pp.84-87
• /
• 1969

Microanalysis of organic sulfur compounds by means of combining thin layer chromatography and oxygen combustion flask method was attempted. The following procedure was found to be very simple and to give accurate results. The mixture of sulfa drugs was separated with T.L.C., and it was burned in a flask filled with oxygen, and the gas formed was absorbed in a dilute solution of sodium hydroxide. The solution was neuralized with hydrochloric acid and heated in a water bath. The sulfate ion formed was then treated with barium chromate solution and its absorbancy at 370 m.mu. was measured.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.489-490
• /
• 2006

Branched sulfonated poly(ether sulfone-ketone) copolymer was prepared with bisphenol A, 4,4-difluorobenzophenone, sulfonated chlorophenyl sulfone (40mole% of bisphenol A) and THPE (1,1,1-tris-p-hydroxyphenylethane). THPE was used 0.4 mol% of bisphenol A to synthesize branched copolymers. Organic-inorganic nano composite membranes were prepared with copolymer and a series of $SiO_2$ nanoparticles (20 nm, 4, 7 and 10 wt%). The composite membranes were cast from dimethylsulfoxide solutions. The films were converted from the salt to acid forms with dilute hydrochloric acid. The membranes were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymers with water and methanol. Branched copolymer and nano composite membranes exhibit proton conductivities from $1.12{\times}10^{-3}$ to $6.04{\times}10^{-3}\;S/cm^2$, water uptake from 52.9 to 62.4%, IEC from 0.81 to 1.21 meq/g and methanol diffusion coefficients from $1.2{\times}10^{-7}$ to $1.5{\times}10^{-7}\;cm^2/S$.