• 한국의류산업학회지
• /
• 제4권2호
• /
• pp.198-202
• /
• 2002

Degummed silk from Bombyx mori was dissolved in 9.3M lithium bromide solution. The regenerated silk fibroin films were completely ${\alpha}$-randomcoil type as shown by x-ray diffraction and infrared spectroscopy. The structural changes in silk fibroin induced by immersion into methanol and dilute hydrochloric acid and its photo-yellowing effect was studied. The changes of crystallinity were measured by infrared spectrometer. Yellowness index caused by ultraviolet irradiation were observed as a function of the structural change on silk fibroin. On treatment with methanol, ${\alpha}$-randomcoil silk film is converted to the ${\beta}$-form structure. After the treatment of hydrochloric acid on ${\beta}$-form structure in silk induced by immersion into methanol, ${\beta}$-form in silk fibroin is partially decreased. Crystallization owing to ${\beta}$-form transition reduced the initial yellowness index by ultraviolet irradiation. A little ${\beta}$-form structure in silk fibroin increased the initial yellowness in comparison with more ${\beta}$-form structure.

• 대한환경공학회지
• /
• 제38권6호
• /
• pp.329-333
• /
• 2016

전기분해에 의한 소독은 소규모 하수처리장, 강우월류수, 선박평형수, 수영장, 양식장 등 염소의 운송, 보관, 사용에 어려움이 있는 곳에 활용될 가능성이 높다. 본 연구에서는 전압(2-5 V), 반응시간(1-10 min), 전해질농도(HCl 0.4-2.2% (w/v), NaCl 5-20 g/L)가 전기분해 산화제(HOCl, $O_3$, $H_2O_2$) 생성 효율에 미치는 영향을 고찰하였다. 회분식 실험 시 투입 전자 대비산화제 전환율(전류 효율)이 가장 높은 최적 조건은 HCl 2.2%, 3 V, 반응 시간 5분이었으며, 이 때의 전류 효율은 99.3%였다. HCl 2.2%, 3 V에서 수행한 연속식 전기분해실험에서는 전류 효율이 97.4% 이상이었으며, NaCl 농도(0-20 g/L) 증가에 따라 주요 산화제인 HOCl의 농도가 비례하여 증가하여 최대 99.8%의 결과를 보였다. 연속식 실험에서 얻은 전기분해수를 이용한 살균실험 결과 5분 안에 92.2% 이상의 총대장균군이 제거되어, 전기분해가 병원성 미생물 소독에 유효하게 사용될 수 있을 것으로 확인되었다.

• 대한화학회지
• /
• 제28권5호
• /
• pp.309-314
• /
• 1984

과염소산, 염산 그리고 황산의 농도 변화에 따른 우라늄과 바나듐 이온의 음이온수지에 대한 용리곡선으로부터 이들 이온의 화학종의 변화와 평형관계를 음이온교환크로마토그래피법으로 연구하였다. 우라늄은 $0.01\;{\sim}\;0.5M$ 과염소산용액에서는 $UO_2^{2+}$의 화학종으로만 존재하며 염산용액에서는 0.5M 까지는 $UO_2^{2+}$ 상태로 존재하나 염산의 농도가 증가함에 따라 여러가지 $Cl^-$의 착물이 형성되는 용리현상을 보였고 황산용액에서는 묽은 황산의 농도에서 우라늄이 상당히 늦게 용리되어 나오는 것으로 보아 $SO_4$=과의 $UO_2(SO_4)_2$= 같은 음이온성 착물이 생성되는 것 같다. 바나듐은 $0.01\;{\sim}\;0.5M$ 과염소산용액에서 바나듐의 용리현상으로부터 $H_2V_{10}O_{28}^{4-}$과 $VO_2^+$간에 다음과 같은 평형이 존재함을 알았다. $H_2V_{10}O_{28}^{4-} + 14H^+ = 10VO_2^+ + 8H_2O$ 염산 및 황산용액에서도 이런 농도범위에서는 위와같은 평형이 존재하나 $VO_2$+과 $Cl^-$ 및 $SO_4^{2-}간의 착이온이 형성되는 것 같다. 위 식의 평형상수값은 $1.9{\times}108$이었다.

• 분석과학
• /
• 제36권6호
• /
• pp.259-266
• /
• 2023

The demand for rare-earth elements (REEs) is increasing owing to their significance as prominent materials in electronics, high-tech industries, geological research, nuclear forensics, and environmental monitoring. In general, the utilization of REEs in various applications requires the use of chromatographic techniques to separate individual elements. However, REEs have similar physicochemical properties, which makes them difficult to separate. Recently, several studies have examined the separation of REEs using LN resin as the stationary phase and aqueous nitric acid and hydrochloric acid solutions as eluents. Using this method, light REEs have been separated using dilute acid solutions as the eluent, whereas heavy REEs are separated using solutions with high acid concentrations. To increase the separation resolution between different REEs, either the column length or resin size is changed. In addition, the suggested methods are implemented to decrease the analysis time. This review presents technical information on the chromatographic separation of REEs using the LN resin and discusses the optimal experimental conditions.

• Advances in materials Research
• /
• 제13권2호
• /
• pp.103-114
• /
• 2024

Zeolites are microporous materials that find applications in different fields due to their numerous interesting properties. This research investigated the effect of leaching on unheated Ifon kaolin in dilute hydrochloric acid and sulphuric acid. The hydrothermal method synthesized zeolite-X type, and the resulting sample was characterized using different techniques. The silica/alumina ratio in the synthesized sample was approximately 5.6, while Infrared spectra confirmed that the synthesized material was Zeolite-X. Based on the X-ray diffraction patterns, other phases were also formed in addition to zeolite-X crystals. Thermogravimetry results indicated that the synthesized zeolite was relatively stable below 500℃, so its weight loss was only 13% after heating to about 200℃. A differential thermal analyzer confirmed this amount of weight loss, and endothermic and exothermic reactions were also observed for the samples calcined respectively at 700 and 900℃. Based on Brunauer-Emmett-Teller (BET) analyses, samples at 700℃ showed slower adsorption-desorption isotherms, pore volume, and sizes than those at 900℃. These results have shown that leaching and calcination temperature significantly affect the type of zeolite produced.

• 한국염색가공학회지
• /
• 제13권1호
• /
• pp.38-44
• /
• 2001

The adsorption ability of dyes on chitin, a natural polymer was investigated for decolorization of dye wastewater. Chitin was manufactured in lab by decalcification in dilute aqueous hydrochloric acid solution and deproteination in dilute aqueous sodium hydroxide solution with shrimp shells. Absorbance of residue solution of dyebaths after dye adsorptions of chtin were measured in varieties of dye concentration and dipping periods. Three kinds of Direct dyes -C.I. Direct Red 81 (red 81), C.I. Direct Brown l(brown 1) and C.I. Direct Green 26(green 26) - were used. Red 81 and brown 1 have smaller molecular weight than green 26. The results from experimentals were of]tamed as follows: 1) Adsorption of green 26 was improved in dyebath by addition of salt, but red 81 and brown 1 were not found any improvements. 2) Smaller size of chitin particles could be absorbed much more speedy. In this experiments, the smallest range of chitin particle size was $250\mu{m}$ and less. 3) The most efficient amount of chitin for 20m1 of dyebath was 0.2g, 4) Both of red 81 and brown 1 showed good and speedy adsorption abilities as dyestuffs of over 90 percent in just one minute in dyebath of 0.01% dye concentration. But green 26 was absorbed slowly because of its large molecular weight. It took 40minutes to absorb dyestuffs of over 90 percent in dyebath of 0.01% dye concentration.

• 한국환경보건학회지
• /
• 제24권3호
• /
• pp.11-17
• /
• 1998

Chitin is known as biodegradable natural polymer. In spite of various application of chitin derivatives from waste marine sources, commercial use of chitin has been limited due to high resistance to chemicals and the absense of proper solvents. We chitin prepared through the decalcification, bleaching and deproteination from Protunus trituberculatus shells by change of Hackman's method. Also, Microcrystalline chitin made by hydrolysis that was reduce made of resistance solvents used by dilute hydrochloric acid, ultrasonic and hydrogen peroxide. Crosslinked chitin derivatives were preparaed from chitin with crosslink agents(epichlorohydrin, 1,3-dichloropropanol) follwed by crosslinkage at 6C position. The effects of these parameters on chitin dervatives were invastigated by IR, DSC, XRD, BET, PSA and SEM. SEM analysis showed that both chitin and crosslinked chitin had a particle shaped morphology.

• Journal of Pharmaceutical Investigation
• /
• 제29권1호
• /
• pp.1-5
• /
• 1999

The bioavailabilities of baicalin in water, oil, w/o and o/w emulsion were evaluated in rats. The dissolution rate of baicalin in o/w emulsion was smaller than those of w/o form in dilute hydrochloric acid solution (pH 1.2) and in PBS (pH 6.8). The absorption rate of baicalin from w/o emulsion was smaller than that of o/w emulsion in the different parts of rat intestine of the rats. Following oral administration in rats, the $C_{max}$ of baicalin from water phase, oil phase, o/w wand w/o emulsion were 2.11, 0.61, 1.57, and $1.35\;{\mu}g/ml$, respectively. The relative bioavailability of w/o emusion was 129 % when it was compared with water phase. This result suggests that the improvement of bioavailability for baicalin in w/o emulsion might be practically available.

• 한국표면공학회지
• /
• 제30권1호
• /
• pp.44-56
• /
• 1997

Influence of electrochemical etching conditions on capacitance gain of aluminium electrolytic on capacitor foil has been investigated by etching cubic textured high purity aluminum foil in dilute hydrochloric acid. Uniformly distributed etch pit tunnels on aluminum surface have been obtained by pretreatment aluminium foil in 10% NaOH solution for 5 minutes followed by electrochemical etching. Electrostatic capacitance of etched aluminium foil anodized to high voltage increased with the increase of current density, total charge, temperature and concentration of electrolyte up to maximum CV-value and then deceased. Election optical observation of the etched foil revealed that the density of etch of etch pits increased with the increase of current density and concentration of electrolyte. this increase of etch pit density enlarged of the increase of capacitance. However, abnormal high current density and high electrolyte concentration induced the local dissolution of the foil surface which resulted the decrease of foil capacitance.

• 약학회지
• /
• 제13권2_3호
• /
• pp.84-87
• /
• 1969

Microanalysis of organic sulfur compounds by means of combining thin layer chromatography and oxygen combustion flask method was attempted. The following procedure was found to be very simple and to give accurate results. The mixture of sulfa drugs was separated with T.L.C., and it was burned in a flask filled with oxygen, and the gas formed was absorbed in a dilute solution of sodium hydroxide. The solution was neuralized with hydrochloric acid and heated in a water bath. The sulfate ion formed was then treated with barium chromate solution and its absorbancy at 370 m.mu. was measured.