• 제목/요약/키워드: Diode detector

검색결과 280건 처리시간 0.021초

W-Band 다이오드 검출기 설계 (Design of W-Band Diode Detector)

  • 최지훈;조영호;윤상원;이진구
    • 한국전자파학회논문지
    • /
    • 제21권3호
    • /
    • pp.278-284
    • /
    • 2010
  • 본 논문에서는 저잡음 증폭기와 무바이어스 쇼트키 다이오드를 사용하여 W-Band에서 동작하는 밀리미터파 다이오드 검출기를 설계, 제작하였다. 향상된 감도 특성을 얻기 위해 다이오드 검출기는 검출기와 저잡음 증폭기로 구성된다. 저잡음 증폭기단은 발진을 제거하기 위해, 높은 저지 대역 특성을 갖도록 설계된 하우징에 저잡음 증폭기 MMIC 칩을 사용해 제작한다. 다이오드 검출기단은 단순한 구조를 사용하기 위해 무바이어스 쇼트기 다이오드를 사용하고, 저잡음 증폭기단과의 연결을 용이하도록 하기 위해 평면형으로 설계한다. 설계 및 제작된 W-band 검출기는 입력 전력 -45~-20 dBm의 변화에 대하여 20~500 mV의 출력 전압을 얻었다. 본 검출기는 수동 밀리미터파 영상 시스템에 적용할 수 있다.

정류기형 다이오드를 이용한 반도체 방사선 검출 장치의 제작과 그 응용에 관한 연구 (The Construction of Solid State Detector System Using Commercially Available Diode and Its Application)

  • 신동오;홍성언;이병용;이명자
    • 한국의학물리학회지:의학물리
    • /
    • 제1권1호
    • /
    • pp.91-95
    • /
    • 1990
  • The solid state detector system was constructed using commercially available rectifier diode for the assessment of quality assurance in radiotherapy. Dosimetry system which consists of the electrometer and the water phanton was used for measuring small field size scanning. The measured results, which had linearity in accordance with variation of radiation dose for gamma-ray of Co- 60 and 6 and 10MV photons of linear accelerator, showed quite linear characteristics within 1% error. The percent depth dose of 10MV photon of Mevatron KD linear accelerator was measured in small field size using diode, and the results were compared with that of using ion chambers. The results show that the difference of percent depth dose between the value of diode and that of ion chamber was negligible in large field size. However, in small size less than 4$\times$4cm, the difference of percent depth dose estimated by diode and ion chamber was 4.7% by extrapolation to 0$\times$0cm. Considering the smaller volume of diode than that of ion chamber, it might be more reliable to use diode for estimating percent depth dose. Above results suggest that diode can be used for routine check such as beam profile, flatness, symmetry and energy

  • PDF

자궁경부암 환자에서 In vivo dosimetry(Diode detector)를 이용할 직장선량의 측정 (Measurement of Rectal Rodiation dose in the Patients with Uterine Cervix fencer using In Vivo Dosimetry(Diode Detector))

  • 김성기;김완선
    • 대한방사선치료학회지
    • /
    • 제16권1호
    • /
    • pp.29-37
    • /
    • 2004
  • 목적 : 자궁경부암 환자의 고선량률 근접치료 시 부작용을 줄이기 위해 가장 주의 깊게 선량을 고려해야 할 곳은 직장과 방광이다. 일반적으로 직장이나 방광에서의 선량값은 Planning장치의 계산값에만 의존하고 있는 상태이고, TLD를 이용한 직장 선량분석은 보고된 바 있으나 In vivo dosimetry(Diode detector)를 이용한 보고는 거의 없었다. 본 연구에서는 자궁경부암 환자치료 시 매번 diode detector를 직장 내에 삽입하여 직장 선량을 측정하고 측정된 값을 토대로 직장의 부작용을 줄이는데 기초 자료로 활용 하고자 하였다. 대상 및 방법 : 2003년 2월부터 2003년 6월까지 Ir-192 동위원소 고선량률 근접치료기로 치료받은 자궁경부암환자 6명(tandem and ovoid 4명, cylinder 1명, tandem and cylinder 1명)을 대상으로 총 28회 측정을 실시하였고 직장내 Diode detector를 매번 측정 시마다 anterior, lateral film을 동일한 지점에서 촬영 후, Planing을 실시하여 측정값과 비교해 보았다. 결과 : 4명의 tandem md ovoid에서 3명의 직장내 Diode detector측정값의 평균과 편차는 $274.1{\pm}13.4cGy$이고 1명의 tandem and ovoid에서 $126.1{\pm}7.2cGy$, cylinder에서 $99.7{\pm}7.1cGy$, tandem and cylinder에서 $77.7{\pm}11.5cGy$이었다. 결론 : 직장의 매 측정 시마다 Diode detector측정값은 직장의 상태에 따라 표준편차가 매우 크므로 단 한번의 치료계획 계산 값으로 직장의 부작용을 예측하는 것은 어렵다. 본 연구에서 얻어진 결과로 볼 때 가능하다면 TLD 또는 In vivo dosimetry 장비를 이용하여 치료 시마다 실측하여 직장의 부작용을 판단하는 것이 중요하며 직장의 부작용이 예상될 시 gauze packing 및 조사시간을 조절하거나 shielded된 기구를 사용하여 직장의 선량을 낮추도록 하는 것이 필요하다고 사료된다.

  • PDF

의료용 선형가속기의 소조사면에 대한 검출기 종류에 따른 평가 (Evaluation of the Small Field of for the Detector Type Medical Linear Accelerator)

  • 이동운;정강교;신귀순;조평곤
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제39권2호
    • /
    • pp.177-184
    • /
    • 2016
  • 최근 선형가속기를 이용한 방사선치료는 세기조절방사선치료, 정위적방사선치료 등이 널리 사용되고 있다. 이러한 방사선 치료기법은 일반적으로 역방향치료계획을 사용함으로써 소조사면을 제외하기 어렵다. 그러므로 소조사면의 선량특성에 관한 정확한 측정이 필요하다. 따라서 유효체적이 서로 다른 검출기를 이용하여 소조사면에 대한 깊이선량백분율, 빔측면도, 그리고 선량출력계수를 측정하여 각 검출기의 선량특성 평가하고자 하였다. 실험 결과 X-선 6 MV에너지에 대한 빔선질($PDD_{20}/PDD_{10}$)은 $10{\times}10cm^2$에서 Diode 검출기는 Pinpoint 검출기에 비해 2.4%로 높았다. 모든 조사면에서 유효체적이 작은 Diode 검출기가 다른 검출기들과 50%이상 작은 반음영을 보여 공간분해능이 우수한 것으로 평가되었다. 출력선량계수는 조사면 $2{\times}2cm^2$에서 Semiflex 검출기 다른 검출기에 비해 2%정도 적게 측정되기 시작해서 조사면 $1{\times}1cm^2$에서는 20%정도 차이를 보이며 유효성이 없는 것으로 판단된다. 조사면 $1{\times}1cm^2$에서 Diode 검출기와 Pinpoint 검출기의 측정값은 13%정도 차이를 보였다. 조사면 $3{\times}3cm^2$이하에서는 검출기의 유효체적에 따른 출력선량계수의 차이가 크므로 가능한 유효체적이 작은 검출기를 사용해야 될 것으로 사료된다.

에너지 하베스팅 응용을 위한 진동 감지기가 있는 전파정류 회로 설계 (Design of a Full-Wave Rectifier with Vibration Detector for Energy Harvesting Applications)

  • 가학진;유종근
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 추계학술대회
    • /
    • pp.421-424
    • /
    • 2017
  • 본 논문에서는 진동 감지기가 있는 전파 정류 하베스팅 회로를 설계하였다. 설계된 회로는 진동 감지기와 능동다이오드를 통해 진동이 감지될 때에만 동작하며, 진동이 없을 때 비교기를 off시켜 $C_{STO}$에 저장된 에너지의 누설을 방지한다. 커패시터에 저장된 에너지는 레벨 변환기와 능동다이오드의 구동에 사용된다. 진동 감지기는 Hysteresis 기능이 있는 Schmitt Trigger와 피크검출기로 구현하였다. 제안된 회로는 $0.35{\mu}m$ CMOS 공정으로 설계하였으며, 모의실험을 통해 동작을 검증하였다. 설계된 에너지 하베스팅 회로의 칩 면적은 $590{\mu}m{\times}583{\mu}m$이다.

  • PDF

광대역 고감도 DLVA 개발

  • 이두훈;김상진;김재연;조현룡;이정문;김상기
    • 한국전자파학회지:전자파기술
    • /
    • 제11권4호
    • /
    • pp.39-52
    • /
    • 2000
  • A design of 2 stage S-DLVA(successive detector log video amplifier) was studied to detect wide dynamic radar pulse ranging from -70 ㏈m to 0㏈m. A basic design idea was focused on the linear detection in logarithmic scale of wide dynamic range radar pulses from nosie-like weak power of -70 ㏈m to relatively high power 0 ㏈m. It is highly formidable, since it requires high speed detection less than 10 nsec over the operating frequency ranges from 6 to 18 ㎓. A limiter diode, a tunnel diode and an L17-C were used as a protecting device, a detector diode and a log video amplifier in companion as a single stage detector to give voltage output proportional to the input power of about 35 ㏈ dynamic range. A protype of 2-stage DLVA having one more single stage detector was fabricated with a 32 ㏈ low noise amplifier and a 3 ㏈ hybrid coupler to provide total 70 ㏈ dynamic range detection. The logging characteristics were measured to have log slope of 25m.V/㏈ against 70 ㏈ logging range from -55 ㏈m to +15 ㏈m, the log linearity of within +/- 1.5 ㏈, and tangential sensitivity was at -63 ㏈m. The pulse dynamics of rise time and recovery time were measured as 50 nsec and 1.2 $\mu$sec, respectively. The reason might be due to the parasitic capacitances of packaged limiter, tunnel diode, and L17-C.

  • PDF

밀리미터파 포락선 검파기를 이용한 무선통신 (Wireless Communication using Millimeter-Wave Envelope Detector)

  • 이원희;장성진
    • 한국인터넷방송통신학회논문지
    • /
    • 제17권6호
    • /
    • pp.79-82
    • /
    • 2017
  • 본 논문에서는 밀리미터파 포락선 검파기를 이용한 무선통신시스템을 제안하였다. 송신기는 쇼트키 다이오드 기반의 서브 하모닉 믹서를 이용하였으며, 수신기는 밀리미터파 포락선 검파기를 이용하였다. 송신기는 쇼트키 다이오드 서브 하모닉 믹서, 주파수 3배기, 혼안테나로 구성되며, 수신기는 혼안테나, 밀리미터파 포락선 검파기, 저역통과필터, 베이스 밴드 증폭기, 리미팅 증폭기로 구성된다. 1.485 Gbps, 300 GHz에서 아이 다이어그램 (eye-diagram) 측정 결과 에러 프리 (error-free)로 아주 좋은 성능을 보였다. 헤테로다인 수신기에 비해 통신 거리는 줄었으나, 소형 경량화 제작이 가능하다.

방사선 치료위치 검증을 위한 다이오드 검출기의 특성에 관한 연구 (A Study on Characteristics of Diode Detecter for Verification of Radiation Therapy)

  • 이동훈;김윤종;지영훈;이동한;홍승홍
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
    • /
    • pp.106-109
    • /
    • 2000
  • The diode characteristics for therapy radiation sensor have been studied by irradiating therapy radiation from the MM22 microtron accelerator. Signal processing has been performed in the pulse mode which can process the signal fast. We have designed integrator, peak detector and synchronization circuit to detect diode signal in the pulse mode for implementation of portal image. We also read the diode signal by A/D board and displayed the peak value with LabView program. Because the quality of portal image obtained by film in the case of therapy radiation is much worse than that of diagnostic film, Digital radiography system by rectifier diode detector was suggested for portal Image.

  • PDF

전신방사선조사(TBI)시 다이오드 측정기(Diode detector) 및 열형광선량계(TLD)를 이용한 골조직 선량감쇄에 대한 고찰 (A study on dose attenuation in bone density when TBI using diode detector and TLD)

  • 임현실;이정진;장안기;김완선
    • 대한방사선치료학회지
    • /
    • 제15권1호
    • /
    • pp.67-77
    • /
    • 2003
  • I. 목적 전신방사선조사(TBI)시 균등한 선량을 조사할 목적으로 사용되는 각 신체부위별 보상체(compensator) 두께의 결정은 열형광선량계(TLD)를 이용하여 표면선량(surface dose)를 측정하고, 심부선량(depth dose)으로 환산하는 방법을 주로 이용한다. 그러나 이와 같은 방법은 골(bone) 조직에 대한 선량감쇄(dose attenuation)의 영향이 고려되지 않아 신체중심부에서의 정확한 심부선량을 알 수가 없다. 이에 본 연구에서는 열형광선량계와 다이오드측정기(Diode detector)로 표면선량과 심부선량을 동시에 측정하여 골조직에서의 선량감쇄 영향을 알아보고자 한다. II. 대상 및 방법 실험은 본원에서 TBI 치료를 받은 5명의 환자를 대상으로 실시하였으며, 측정장비로는 Siemens Mevatron 10MV X-ray, TLD(Harshaw 5500), Diode detector(Sun Nuclear)를 사용하였다. 선량 조사방법은 복부의 배꼽(umblicus)를 중심으로 하여 이문대향법(Bilateral)으로 150cGy가 조사되도록 하였다. 측정방법은 열형광선량계로 두부, 경부, 대퇴부, 슬관절, 족관절, 부위의 표면선량을 측정하였으며, 이 가운데 대퇴부, 슬관절, 족관절에서는 중심부 선량측정이 가능하여 동시에 심부선량을 측정하였다. 또한 실험대상자 중 3명의 환자는 상기와 같은 부위(두부, 경부, 대퇴부, 슬관절, 족관절)에 다이오드측정기로 심부선량을 측정하였다. III. 결과 TLD로 측정한 표면선량을 심부선량으로 환산한 값은 두부, 경부, 대퇴부, 슬관절, 족관절에서 각각 $92.78{\pm}3.3,\;104.34{\pm}2.3,\;98.03{\pm}1.4,\;99.9{\pm}2.53,\;98.17{\pm}0.56$ 이었고, 중심부 심부선량 측정이 가능한 대퇴부, 슬관절, 족관절에서는 각각 $86{\pm}1.82,\;93.24{\pm}2.53,\;91.50{\pm}2.84$로 나타났다. 따라서 표면선량과 중심부 심부선량 비교가 가능한 대퇴부, 슬관절, 족관절에서의 TLD의 측정치를 비교해보면 부위에 따라 최소 $6.67\%{\sim}$ 최대 $11.65\%$까지 골조직에 의한 선량감소가 나타나는 것을 알 수가 있다. 또한, Diode detector로 측정한 심부선량 값은 두부, 경부, 대퇴부, 슬관절, 족관절에서 각각 $95.23{\pm}1.18,\;98.33{\pm}0.6,\;93.5{\pm}1.5,\;87.3{\pm}1.5,\;86.90{\pm}1.16$으로 나타났으며, TLD로 측정한 대퇴부, 슬관절, 족관절에서의 표면선량과 비교했을 때 부위에 따라 최소 $4.53\%{\sim}$ 최대 $12.6\%$ 까지 차이를 보였다. 그리고 골조직에 의한 선량감쇄의 영향이 적은 복부(배꼽)에서는 열형광선량계 및 다이로드측정기로 측정한 값이 각각 $101.58{\pm}0.95,\;104.77{\pm}1.18$로 큰 차이가 없었다. IV 결론 전신방사선조사시 표면선량을 측정하여 심부선량으로 환산한 값은 골조직의 감쇄영향을 고려하지 못하므로 다이로드측정기(Diode detector) 또는 열형광선량계(TLD)로 중심부선량을 직접 측정하는 것이 중요하다. 그러나 중심부의 심부선량을 직접 측정할 수 없을 경우에는 골조직의 감쇄영향을 고려하여 복부배꼽에서의 선량보다 $5\%{\sim}10\%$ 정도의 선량이 초과 조사되도록 보상물질의 두께를 적절하게 조절하는 것이 필요할 것으로 사료된다.

  • PDF

Full-Wave Rectifier with Vibration Detector for Vibrational Energy Harvesting Systems

  • Yoon, Eun-Jung;Yang, Min-Jae;Park, Jong-Tae;Yu, Chong-Gun
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제16권3호
    • /
    • pp.255-260
    • /
    • 2016
  • In this paper, a full-wave rectifier (FWR) with a simple vibration detector suitable for use with vibrational energy harvesting systems is presented. Conventional active FWRs where active diodes are used to reduce the diode voltage drop and increase the system efficiency are usually powered from the output. Output-powered FWRs exhibit relatively high efficiencies because the comparators used in active diodes are powered from the stable output voltage. Nevertheless, a major drawback is that these FWRs consume power from the output storage capacitor even when the system is not harvesting any energy. To overcome the problem, a technique using a simple vibration detector consisting of a peak detector and a level converter is proposed. The vibration detector detects whether vibrational energy exists or not in the input terminal and disables the comparators when there is no vibrational energy. The proposed FWR with the vibration detector is designed using a $0.35-{\mu}m$ CMOS process. Simulation results have verified the effectiveness of the proposed scheme. By using the proposed vibration detector, a decrease in leakage current by approximately 67,000 times can be achieved after the vibration disappears.