• Journal of Distribution Science
• /
• v.14 no.11
• /
• pp.91-102
• /
• 2016

Purpose - The objectives of this study are as follows. First, it aims to suggest an analysis model that has integrated the relationship between the two factors and export performance and conduct an empirical analysis of the factors. Second, the study seeks to analyze the mediating effect by setting direct channel governance as a specific activity to connect market orientation, a cultural asset, to export performance. Third, through these analyses, the study intends to apply the relationship between market orientation and direct channel governance that the existing studies have failed to observe comprehensively on SMEs in Korea. Based on these analyses, the study expects to expand the discussion of previous researches by analyzing the mediating effect of direct channel governance. Research design, data, and methodology - This study developed a model that has integrated market orientation, direct channel governance, and export performance. It established 7 hypotheses including the mediating effect of direct channel governance. Market orientation was consisted of customer orientation and competitor orientation, and 4 latent variables were measured by 18 questions. LISREL, an analysis tool of structural equation model, was used for hypothesis test and there were 183 sample for analysis. Results - The analysis results showed that customer orientation has a positive influence on direct channel governance, but competitor orientation did not have a statistically significant effect. On the contrary, export performance showed an opposite result. That is, customer orientation did not have any influence but competitor orientation had a significant influence on export performance. It was also confirmed that there was a significant influence in the relationship between channel governance and export performance. According to the analysis of mediating effect, direct channel governance had a full mediating effect between customer orientation and export performance. Conclusions - The study results demonstrated that it is important to build a direct channel governance on the export SMEs in Korea, especially since the direct channel governance complements the influence of customer orientation that does not directly influence export performance among market orientation activities. This implies that Korean export SMEs must strive to build an effective direct channel governance.

• Asia Marketing Journal
• /
• v.15 no.2
• /
• pp.29-47
• /
• 2013

Distribution channel decisions involve long-term commitments with other firms that are very difficult to change or replace. In particular, marketing channel decisions in emerging markets are much more complicated due to unfamiliar conditions and problems such as lack of market data and distribution systems. Therefore, when a company considers changing or introducing a marketing channel in an area, it is much more difficult to judge its effectiveness in an emerging market than in a developed market. In this study, we investigate the development process of a new direct marketing channel of Hongfu Fertilizer Company (hereafter Hongfu), a medium-sized Chinese fertilizer manufacturer, and propose an approach to test the feasibility of this new marketing channel in the Chinese rural market. We measure the effectiveness of Hongfu's new marketing channel from two perspectives: i) from customers' perspective through direct responses of farmers, which showed that a new channel can increase the convenience and lower the purchasing costs for the farmers, and ii) from the company's perspective, by calculating the incremental profit of the company using the expansion factor (T/Q) method, which suggested that the execution of Hongfu's strategy to expand a new marketing channel will result in an increase in profits. The results of this study contribute to the development of a methodology to test the feasibility of a new direct marketing channel in the emerging markets such as the Chinese rural market. Traditional and indirect distribution channels in emerging markets are generally not very efficient and difficult to change. Especially, in emerging markets, like the Chinese rural market, the methods of testing channel feasibility must be different from that of developed markets. Considering market situations, market experiments can be more effective then systematic market surveys in testing channel feasibility in emerging markets. This study implies that managers must learn to cope with a transition from the traditional marketing channels in emerging markets. With the development in farmers' understanding of marketing concept, the transition from traditional marketing channel is unavoidable for all firms. Farmers in China are generally very conservative, however, their buying behaviors are changing. Therefore, fertilizer companies should try to adjust in accordance with farmers' demand characteristics that the efforts to meet the economic needs of farmers with new marketing channels as well as trust building are critical in the near future.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.288-298
• /
• 2016

Proactive relay selection in cognitive radio networks has recently received considerable attention. However, its outage probability analysis is limited to partially-identical fading distributions, uncorrelation among received signal-to-noise ratios (SNRs), and no direct channel. This paper completes this literature deficiency by generalizing the existing analysis for non-identical fading distributions, correlation among received SNRs, and with direct channel. Numerous results demonstrate that relay selection with a direct channel achieves a higher diversity order and superior performance than that without a direct channel at virtually no cost of power and bandwidth. Further, proactive relay selection suffers an error floor at either a large maximum transmit power or large maximum interference power; however, the error floor level can be significantly remedied with an increase in the number of relays.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1761-1765
• /
• 2005

The plastic injection molding industry is increasing pressure to reduce the cycle time in order to improve the productivity. The time of a cooling die is a large part of the cycle time. The conformal cooling channels can reduce the cooling time effectively as compared with conventional production die. It is hard to make the die with a conformal cooling channel by the conventional method. This paper introduces the method of a conformal cooling channel manufacturing by the DMT (Direct Metal Tooling) that is a new technology.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.2
• /
• pp.1-9
• /
• 1980

A voltage synthesizing channel selection circuit was designed to improve on the conventional vol tape synthesizer which has been memorized each charnel's tuning vol cage itself. In the course of this study, tuning voltage was calculated by channel number entered from 10 keys. Then this circuit has tie function of direct access channel selection and rear display of channel number for the whole range of UHF and VHF, Attention was also given to realize the fine tuning by searching each commended channel, and the sequential selection by using 2keys, and the flash of channel indicator in case of inactive station.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.162-169
• /
• 2000

A Direct Drive Valve(DDV) hydraulic actuation system which is commonly used as an aircraft's control surface driving actuator has multi-loop control structure to ensure its safety operation. However, because of not perfect matching of one self channel characteristics with the others, the servo valve driving current of each channel can be widely different. Therefore, the long-time use of DDV actuator without any correction of these channel current offsets will cause the problem of performance or life expectancy degradation due to unwanted heats in the linear motor. A current equalization loop structure which can minimizes current offsets between channels is introduced and designed. The performance of the current equalization loop is investigated and verified through the analytic and experimental ways.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.45-48
• /
• 2008

This paper presents a passive air-breathing direct methanol fuel cell (DMFC) which has been designed and tested. The single cell is fuelled by methanol vapor that is supplied through flow channel from a methanol reservoir at the anode, and the oxygen is supplied via natural air-breathing at the cathode. The methods for supplying the methanol vapor to the single cell were parallel channel and chamber. This research investigates various methods to identify the effects of using flow channels for providing the methanol vapor at the anode, and the opening ratio between the inlet and outlet ports for the methanol flow at the anode. The best flow channel condition for passive DMFC was a chamber, and the opening ratio was 0.8. Under these conditions, the peak power was 10.2mW/$cm^2$ at room temperature and ambient pressure. The key issues for the Passive DMFCs for using methanol vapor are that sufficient methanol needs to be supplied using a large as possible opening ratio. However, it is shown that the performance of the passive DMFC, which has a channel at the anode,is low due to the low differential pressure and insufficient methanol supply rate.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1807-1812
• /
• 2004

Sinusoidal wavy channel is one of the most commonly used devices in the industry for achieving mixing and heat transfer. Here we report on results obtained from the DNS of flow inside the wavy channel performed using the finite volume technique. As a primary stage to obtain the optimal design for heat transfer and mixing, this study observed the basic flow structures in a wavy channel. The mass flow rate is kept constant with friction Reynolds number of $Re_{\tau}$ = 140 . Time- and space-averaged and instantaneous flow fields are illustrated to observe the flow structures. Although the direct comparison of results between turbulent wavy and flat channel is somehow difficult due to the different flow phenomena derived from different configuration, here the mean streamwise velocity and RMS of velocities at same $Re_{\tau}$ of two different channels are compared. The basic difference between wavy and flat channel flow is the existence of small scale wall vortices along the walls in a wavy channel. These vortices make flow more complex, which will accompany the increase of heat transfer, pressure drop and drag.

• The Journal of Fisheries Business Administration
• /
• v.23 no.2
• /
• pp.101-128
• /
• 1992

How to distribute fisheries catches from producer to consumer is very important for everybody joined fisheries marketing channels (FMC), because most people are influenced their revenue and expenditure through marketing channels. Many institutions in Korea after 1960's have tried to develop the rationalization of FMC, but they have not gotten the satisfactory results in general in spite of a lot fruits. Comparing with general manufacturing industry, the fisheries industry has some specializations in the marketing channels. It makes them unique structure included wholesale market system similiar to fresh (perishable) food market with expertised technology. Wholesale market collects, distributes the fisheries catches and evaluates in by auction or bidding without consideration of producer's opinion. It is very necessary institution to make a decision to equatible price for fresh food and to play an important role for marketing effectiveness with minimum total transation and with massed reserve among institutions. But it has two weak points to increase the marketing cost and to make products bad fresh (perishable). Therefore, both Producer and consumer want to find the direct channels not to pass through wholesale market and to get more profit. I wanted to explain what problems of traditional FMC are and why the direct channel is necessary as follows in this paper. Chapter II : The types and specialization of FMC Chapter III : The structure and problem of fisheries wholesale market channel Chapter IV Marketing cost of FMC and direct channel I suggested when the direct channel in FMC is designed, new planner must carry out marketing functions which are performanced by wholesaler, middle man and the joined members of auction at wholesale market. In view of consumption area, these functions are : (1) the finding of production partner to make a business ; (2) communication of information ; (3) collecting ; (4) distribution ; (5) selecting and grading ; (6) evaluating ; (7) financing and payment ; (8) organization, in view of consumption area. The government must support also the group or individual of new direct channels to succeed it with (1) furnishing of market information (2) supplying of land and facility (3) financing (4) feed-back of dierct channels totally (5) making an opportunity of communication between producer and consumer. I want to emphasize again wholesale market is necessary and important institution for equatible price of fresh food in spite of the its weak points. At the same time. the direct channels are necessary to reduce the marketing cost and to keep better fresh food.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.42-42
• /
• 2003