• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.71-81
• /
• 2000

The water-based ink has lately attracted considerable attention because of problems of energy and population. Carbon blacks have been widely utilized in water-based systems to provide pigmentation. One of the most important factors in the successful formulation of an aqueous system containing carbon black is the dispersion and the selection and proper utilization of the dispersing agent. This is similar to water-based ink. This paper discusses dispersion of carbon black with the factors affecting the dispersing agent requirement (DAR) and describes a laboratory method for determining it. Variables that affect the dispersion, such as structure, surface area, and oxidation level of the carbon black are examined through test data. Anionic and nonionic dispersing agents are evaluated using the DAR method. From this study, the increased surface area, the increased DAR is indicated. DAR is indicated to depend on HLB(Hydrophilic Lipophilic Balance) of dispersing agent and pH of dispersing system.

• 한국인쇄학회지
• /
• 제30권2호
• /
• pp.59-68
• /
• 2012

As one of the eletronic device industries has been developed by using a recent printing method, the consumption of Ag paste has been on the rise as well. The printing method has simple processes in comparison with other methods. Also it enables to be large-scaled and to lower price ranges. If UV curing system would be applied to the printing method, energy consumption and dangerousness from curing system can be minimized in a short period of time so that its method can be more eco-friendly. This study conducted an experiment in order to make UV curing Ag paste which is feasible to implement micro patterns with different dispersing agents. The purpose of the study is to analysis the suitable printability for micro pattern and to test dispersibility, hardening properties, conductivity and adhesive stength by measuring viscosity, TI(thixotropy index), G', G", $tan{\delta}$(G"/G') after making paste. We have experimented with four dispersing agents. After We did an analysis of characteristic of rheology, conductivity and adhesive stength, etc, We confirmed that the paste added FP 3060 has excellent dispersibility, conductivity and adhesive stength. If the paste has excellent dispersibility, we will expect that micro pattern is made by that.

• 한국지반공학회지:지반
• /
• 제14권4호
• /
• pp.117-128
• /
• 1998

지오그리드를 이용한 입체적인 매트리스기초는 연약지반의 지지력을 증가시키기 위해서 증증 사용되며 그 효과를 인정받고 있다. 지오그리드-매트리스 시스템이란 그 자체의 강성에 의해 하중을 보다 더 넓게 기초지반에 분산시킴으로서 지지력의 증대효과 및 침하억제효과를 가져오는 공법이다. 그러나, 이에 대한 메카니즘은 아직 명확하게 규명되어 있지 않다. 본 연구에서는 지오그리드 매트리스기초 아래 전파응력분포 특성을 파악하기 위해 모형실험을 실시하였고, 실험에서는 지오그리드 매트리스기초와 두께 및 지지하는 기초의 강성 등을 영향인자로서 고려하였다. 실험결과로부터 매트리스기초하의 전파응력분포 특성을 파악하였고, 지오그리드 매트리스기초 설계시 지지력을 구할 수 있는 방법을 제안하였다.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.243-245
• /
• 2002

Pigment-dispersing factor (PDF) is an octadecapeptide distributed in the optic lobe and the brain in a variety of insect species. There are lines of evidence suggesting possible involvement of PDF in the insect circadian system. However, its physiological roles in the circadian time keeping mechanism have not been clearly defined. In this study, we have examined the phase shifting effects of Gryllus-PDF on the circadian locomotor rhythm in the cricket Gryllus bimaculatus of which circadian clock is located in the optic lobe. Phase shifts in the circadian activity rhythm were measured following microinjection of 22nl of vehicle (Ringer's solution) or O.lmM PDF into the optic lobe through the compound eye at various circadian times. The results showed that PDF induced phase shifts of the circadian clock in a phase-dependent manner, suggesting that it may play a role as an input signal for the circadian clock.

• 한국의류산업학회지
• /
• 제3권1호
• /
• pp.42-47
• /
• 2001

The hardening system of polyurethanes has usually caused by air pollution. bad working condition and fire hazard according to using orgarnic solvents. Therefore there have been researched on emulsion, water soluble and colloid-dispersion based water soluble instead of using organic solvents recently. This study synthesized polyurethane dispersing particle by means of mixing precursor and neutralized emulsion method. In the first step, polyurethane was preparated from isophorone diisocyanate and poly (ethylene-adipate) glycol, and got precursor by introducing dimethyl propionic acid as a hydrophilic group. Synthesized polyurethane was bonded to the surface of fiber and crosslinked as a anti-static agent, and then looked for the change of color and softening property.

• 한국생산제조학회지
• /
• 제22권3_1spc호
• /
• pp.537-543
• /
• 2013

A water-$Al_2O_3$ nanofluid was manufactured, and its thermal conductivity was measured in this study. The measurement was performed at volumetric concentrations of 0.5%, 1%, 2%, and 3%, and the nanoparticle sizes were 20 nm and 70 nm. Experimental test equipment, using the transient hot wire method, was installed to measure the thermal conductivity of the nanofluid, and the measured results were confirmed by measuring pure water with a measurement error of 0.92% at $20^{\circ}C$. The thermal conductivity enhancement ranged from 4.8% to 13.6% for the 20 nm particle size, and from 3.1% to 8.8% for the 70 nm particle size at a concentration range of 0.5% to 3%. The enhancement increased with a decrease in particle size and an increase in concentration. With the elapse of time after manufacturing the nanofluid, the thermal conductivity enhancement decreased significantly from 5 to 9 h, and this trend was measured under all of the measurement conditions. After 24 h, the enhancement ranged from 1.2% to 3.5% for the 20 nm particles, and from 0.6% to 2.3% for the 70 nm particles. The enhancement trends with the elapse of time were almost identical with and without stirring the nanofluid. SDBS (Sodium Dodecyl Benzene Sulfonate) was added as a dispersing agent, and the decrease in the thermal conductivity enhancement was delayed.

• 펄프종이기술
• /
• 제33권4호
• /
• pp.42-48
• /
• 2001

The spent liquor (BSL) obtained from alkaline sulfite-anthraquinone (AS-AQ) cooking of pine bark was applied as a deinking agent. In the ONP deinking system, although BSL removed the small size of ink particles (${\geq}$$12.5{\mu}m$), it did not improve the brightness of pulp. The brightness of pulp slightly improved when treated with BSL at 150~$180^{\circ}C$. However, the brightness of the pulp was lower than that of a commercial deinking agent (oleic acid). It seems that BSL treated with a high temperature still had a high dispersing ability on the ink particles. Intensive oxidations were introduced, and remarkable deinking effects were observed at 13kgf/$cm^2$ oxygen pressure, $160^{\circ}C$ and 2h. When BSL treated at 13kgf/$cm^2$ oxygen pressure, $170^{\circ}C$ and a time period of 30~90 min is added to the pulp, at 0.1% or lower, the deinking effect became higher than that of oleic acid. On the other hand, additional alkali treatments during the oxidation possibility as a deinking agent when oxidized. However, since the oxidized BSL still has a high dispersing ability and lower molecular weight, several modifications need to be done in the near future in order to be applied as a high quality deinking agent.

• 대한환경공학회지
• /
• 제22권4호
• /
• pp.713-722
• /
• 2000

본 연구는 입자크기를 분석하기 위한 장치인 레이저회절 분광계의 측정오차 및 재현성을 분석한 것이다. 레이저회절 spectrometers는 입자크기를 분석하기 위한 장치 중에서 가장 대표적이고 중요성을 가진다. 이 측정장치는 운전이 간단하며, 입자분석에 있어서 재현성이 우수하고, 빠른 속도로 분석이 가능한 형태이다. 입자크기를 분석하는 과정에 있어서 공급되는 분산형태와 흐름율에 따라서 측정오차가 미세하게 발생되었고, 흐름율은 분산형태가 건식인 경우 0.1~23 g/min로 공급하였고, 습식인 경우는 분산되는 용매에 따라서 1.4~35 %가 되도록 조절하여 측정결과에 따라서 발생되는 측정오차를 분석하였다. 흐름을 변화에 따라서 발생되는 측정 오차는 측정 cell 내의 입자에 입사되는 레이저 회절패턴이 변화함으로서 측정오차가 다양하게 발생하였다. 본 연구에서 측정오차를 분석하기 위해서는 입자모양, 크기, 분산형태와 용매, 흐름율과 농도의 변화에 따라서 실험을 실행하였고, 분석장치의 시스템에 따른 측정오차를 나타내기 위해서는 장치내의 역학적인 공정, 측정시간, 초점거리, 주입압력, 전처리과정인 ultrasonic이나 혼합에 의한 분산효과에 따라 측정오차 및 재현성을 분석하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.472-480
• /
• 2014

The In solar power system, the height and azimuth of the sun are important parameters which control generated power magnitude. The tracking method that controls the daily generation magnitude according to latitude and longitude using the two axles is often used in the existing sunlight tracking system today. In this two-axle PV track control system, the self-load is concentrated on one FRAME. It is influenced of the regular load, snow load and the wind load, etc. It is difficult to set up the system in the conventional building. This research is a development about the small-scale economy track device of independent load-dispersing solar generation system. The position tracking algorithm is through new coordinates transformation calculating the height and azimuth of the sun.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.86-88
• /
• 2007

In solar power system, the height and azimuth of the sun are important parameters which control generated power magnitude. The tracking method that controls the daily generation magnitude according to latitude and longitude using the two axles is often used in the existing sunlight tracking system today. In this two-axle PV track control system, the self-load is concentrated on one FRAME. It is influenced of the regular load, snow load and the wind load, etc. It is difficult to set up the system in the conventional building. This research is a development about the small-scale economy track device of independent load-dispersing solar generation system. The position tracking algorithm is through the new coordinates transformation calculating the height and azimuth of the sun.