• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.1
• /
• pp.74-85
• /
• 2010

In order to formulate the compounded polypropylene(C-PP) which is suitable to an automotive door trim panel, 9 sorts of properties were measured after manufacturing the C-PP using an extruder and an injection machine with polypropylene(PP), ethylene-octene rubber(EOR) and talc. Mixture design, especially extreme vertices design, in DOE with MINITAB - commercial software was used to analyze the data. The relations between each property and each component, for example, $y=0.00907222x_1+0.00870556x_2+0.0155722x_3$ for specific gravity, were found out by the regression analysis and the variance analysis. The optimized formulation of the C-PP for an automotive door trim panel was acquired at PP(77.6962), EOR(11.0238) and talc(10.2800) by use of the response optimizer(mixture) in MINITAB.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.137-138
• /
• 2006

TPOs based on polypropylene has been dominating materials in hard automotive parts such as in bumper fascia, instrumental panel and door trim panel owing to their variety of advantages compared to engineering plastics and steels for years. Recently as environmental regulations related to recycle have been strengthened, the use of TPOs in soft automotive parts such as instrument panel skin and door trim skin is being required much more.. Therefore, in this study, we' d like to give an overview of soft TPOs and introduce soft TPO materials requirement and preferable materials composition by vacuum thermoforming and powder slush molding, respectively.

• Journal of the Korean Society of Visualization
• /
• v.8 no.1
• /
• pp.25-30
• /
• 2010

The flow characteristics under recirculation cool vent mode is numerically studied using commercial fluid dynamic code(CFX). For the reliable analysis, real vehicle and human FE model is employed in grid generation process. The geometrical location and shape of panel vent, and exhaust vent is set as that of real vehicle model. The flowrate of the working fluid is determined as 330CMH which is equivalent to 70 percent of maximum capacity of HVAC system. The high velocity regions are formed around 4 each panel vent. Because of the non-symmetrically located exhaust, non-uniform flow and partial backflow near the door trim is observed. Streaklines start from each panel vent show the flow pattern of the airflow in the passenger's compartment very well.