• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.229-230
• /
• 2015

This paper presents practical details about control-loop design and dynamic analysis for a voltage-mode controlled isolated double step-down DC-DC converter. Graphical loop gain method is used to design the feedback compensation and analyze the closed-loop performance of isolated double step-down DC-DC converter. The results of the control design and closed-loop analysis are validated by experiments on a prototype converter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.561-568
• /
• 2003

There arc two ways in the output voltage control method in PWM inverters. One Is double loop voltage control composed of inner current control loop and outer voltage control loop.'rho other is single loop voltage control method composed of voltage control loop only. It's characteristics shows lower performance in case of high output impedance than double loop voltage control. However, in case of low output impedance, it shows good control performance in all load ranges than double loop voltage control. In this paper, the rule and the gain of single loop voltage control have been developed analytically and these were verified through computer simulation and experiment.

• Bulletin of the Korean Mathematical Society
• /
• v.36 no.4
• /
• pp.747-754
• /
• 1999

We compute the mod p homology of the double loop space of Sp(n)/U(n) by the Serre spectral sequence and the Eilenberg-Moore spectral sequence with the homology operations.

• Bulletin of the Korean Mathematical Society
• /
• v.40 no.2
• /
• pp.281-288
• /
• 2003

We compute the mod p homology of the double loop space of 50(2n)/U(n) by the Serre spectral sequence of Hopf algebras. We also obtain the torsion information of the integral homology.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.3
• /
• pp.28-36
• /
• 1995

In this paper, a double loop control model using leaky delay LMS algorithm are proposed for active noise control. The proposed double loop control model estimates the loudspeaker characteristic and the error path transfer function with on-line using only gain and acoustic time delay to reduce computation burden. The control of error signal through double loop control scheme makes the more robust cntrol system. The input signal of filter to estimate acoustic time delay is used difference between input signal of input microphone and adaptive filter output. And also, in nonstationary environments, the leaky delay LMS algorithm is employed to counteract parameter drift of delay LMS algorithm. For practical noise signal, the proposed double loop control model reduces noise level about 12.9 dB.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.496-500
• /
• 2001

There are two ways in the output voltage control method in PWM inverter. One is the double loop voltage control composed of inner current control loop and outer voltage control loop. Because it shows fast response and low steady state error, utilized in many application. The Other is single loop voltage control method composed of voltage control loop only. It's characteristics shows lower performance in case of high output impedance than double loop voltage control. But in low output impedance, it shows good control performance in all load range than double loop control. In this paper, single loop voltage control rule and gain was developed analytically, and these were verified through computer simulation and experiment.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.914-915
• /
• 2008

Generally, inverter controller for UPS or renewable energy system have been used double loop PI controller, But it is hard to get controller gains for double loop controller because it is high order. Futhermore, to consider time specification is difficult too. This paper presents the way how to make double PI loop controller for inverter satisfied with time specification using CRA method and verify efficiency of it using Matlab and Psim.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.602-611
• /
• 2019

The major drawbacks of magnetic resonant coupled wireless power transfer (WPT) to the embedded sensors on spindles are transmission instability and low efficiency of the transmission. This paper proposes a novel double-loop coil design for wirelessly charging embedded sensors. Theoretical and finite-element analyses show that the proposed coil has good transmission performance. In addition, the power transmission capability of the double-loop coil can be improved by reducing the radius difference and width difference of the transmitter and receiver. It has been demonstrated by analysis and practical experiments that a magnetic resonant coupled WPT system using the double-loop coil can provide a stable and efficient power transmission to embedded sensors.

• Journal of Veterinary Clinics
• /
• v.39 no.4
• /
• pp.149-155
• /
• 2022

The aim of this study was to compare the mechanical properties of 0.6 and 0.8 mm cerclage wires with the 1.0 mm cerclage wire in the twist, single-loop, double-loop, double-wrap, and loop/twist knot methods. Six stainless steel cerclage wires of various diameters in different knot methods were tied round a customized jig mounted on a load testing machine. The initial tension, initial stiffness, and yield load were evaluated. The failure mode of each cerclage was observed. For each wire size, the double-loop, double-wrap, and loop/twist knots showed significantly greater initial stiffness, and yield load than those seen with twist and single-loop knots. The single-loop knot showed the least initial stiffness regardless of the diameter. As the cerclage wire diameter increased, the cerclage tended to show significantly greater initial stiffness, and yield load. Failure modes varied depending on the knot configurations. Single-loop knots of smaller-diameter wires less than 1 mm had similar or lower initial tension, initial stiffness, and yield load than a twist knot. Owing to the variance in mechanical properties, the clinical application of the knot type should depend on the diameter of the cerclage wire.

• Bulletin of the Korean Mathematical Society
• /
• v.34 no.3
• /
• pp.359-370
• /
• 1997

In this paper we get the Morava K-theory of the double loop spaces of quarternionic Stiefel manifolds for an odd prime p by computing the Atiyah - Hirzebruch spectral sequence. We also get the homology with Z/(p) coefficients and analyze p torsion in the homology with Z coefficients.