• Journal of the Korean Society of Safety
• /
• v.30 no.2
• /
• pp.56-62
• /
• 2015

The purpose of this study was to identify the relationship between the index of Electrocardiography(LF/HF) and the occurrence of drowsiness driving while driving in a simulated situation. Participants were 31 undergraduate students with an experience in driving and they participated 30 minutes driving under enough sleep condition and 1 hour under the sleep deprivation condition. The Euro Truck Simulator II was used for driving simulation task and ECG and perceived drowsiness of each participants were measured during two driving conditions. Perceived sleepiness recorded by the checklist every 10 minutes and ECG data extracted before and after 15 seconds of every 10 minutes to verify the relationship between two variables. The results showed that the level of perceived sleepiness under sleep deprivation condition was higher than that under the enough sleep condition, and the level of LF/HF under sleep deprivation condition was lower than that under the enough sleep condition. In addition, the result of analysis of repeated measure ANOVA for ECG indicated that authentic sleepiness revealed in 20 minutes after the start of driving under the sleep deprivation condition. However, the result of perceived drowsiness indicated that authentic sleepiness revealed in 30 minutes after the start of driving. These result suggest that the time difference between biological and perceived response on drowsiness may be exist. Finally, the significant negative correlation between the LF/HF level and perceived drowsiness was observed. These findings suggest that ECG(LF/HF) can be an possible index to measure drowsiness driving.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.525-530
• /
• 2000

The vibration shape of the structure with arbitrary boundary condition under excitation is determined by the governing equation and the boundary condition and driving force. In this paper, driving point impedance that is defined by the ratio of the driving force at one point to the velocity of that point is selected as a measure to identify the boundary condition. First, this paper deals with a string with arbitrary boundary condition. It is selected because of its simplicity, but generality of which exhibits the desired physical phenomena. Particularly the relation among the driving point impedance, the boundary condition and the vibration shape is dealt as a primary step to identify the boundary condition by using the driving point impedance.

• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.61-74
• /
• 2005

This study is to investigate the effects of driving anger and traffic congestion on drivers' behaviors. Driving anger is the propensity to become angry while driving, and people differ in the tendency to get angry when encountering frustration and provocation on the road. Individual differences of the propensity contribute to anger on the road and aggressive driving leading traffic vaiolations and accidents. In the experiment three traffic conditions (an open road condition, a bumper-to-bumper traffic condition and a being stuck behind a slower driver condition) were simulated and driving behaviors were collected with RTSA-DS(Road Traffic Safety Authority-Driving Simulator). The results were as follows: Most of high anger drives drove at higher speeds in an open road condition, and in the bumper-to-bumper condition they drove faster and had an higher crash rate, which suggests they did aggressive driving, and risky and unsafe behaviors.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.1
• /
• pp.60-67
• /
• 2006

To improve the vehicle fuel economy, various technologies have been studied. Meanwhile it deteriorates fuel economy that the increased driving torque for Power Steering System (PSS) due to weighted vehicle and widened tire for low speed driving and parking. So the larger driving torque for PSS is, the lower fuel economy is. Therefore, the study about the effect of the driving torque for PSS and the engine total friction must be preceded to improve the vehicle fuel economy. In this study, a PSS module separated from the vehicle is used to measure the driving torque for PSS with respect to the pressure of PSS. The result shows that the driving torque for PSS was in direct proportion to the pressure of PSS 3 (N-m) driving torque for PSS vs. 10 (bar) pressure of PSS, and 8 (N-m) vs. 40 (bar). In addition, the driving torque and pressure for PSS was measured according to the engine speed in the component test condition which was in the vehicle condition. Measuring the driving torque for PSP in the vehicle condition was established by using the VeFAS which was a fuel economy analyzer developed in our lab and installing PSS By-pass line. The effect of the driving torque for PSS on the vehicle fuel economy was analyzed with FTP-75 cold start mode.

• Journal of Korean Institute of Industrial Engineers
• /
• v.38 no.1
• /
• pp.41-45
• /
• 2012

Until now, most studies of foot moving or driving posture have been performed under laboratory driving conditions. But there are many different things between actual driving conditions and laboratory driving conditions because, in laboratory conditions, it is hard to consider vehicle's noise, vibration and people's psychology state while driving. Thus this study is performed through actual driving conditions. And while driving test, we recorded driver's foots with 2 cameras to investigate foots(left and right) heel point and how human foots move to control the three pedals : accel, brake and footrest.. Through driving test, the results of this study show that the position of driver's heel point isn't related to stature and tends to be generalized.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.8
• /
• pp.592-599
• /
• 2014

A torsional vibration at driveline happens seriously at rapid vehicle acceleration. The torsional vibration at driveline can be reduced by optimization of joint angle and yoke phase angle of driveline. But, the joint angle of driveline is changed according to vehicle driving condition as acceleration, deceleration, forward and backward driving, so that excessive vibration is transmitted to vehicle body at specific driving condition. Especially under rapid acceleration condition, vibration transmitted to body could be maximized because excitation force at rapid acceleration is bigger than that at normal driving condition due to changed joint angle. The torsional vibration of driveline can be kept at low level by controlling suspension parameter to minimize rigid axle displacement as well as optimizing joint angles considering the vehicle acceleration condition.

• International journal of advanced smart convergence
• /
• v.11 no.1
• /
• pp.94-100
• /
• 2022

It is common for commercial vehicles to make the top part according to the use after making the bear chassis, and to connect various devices with the bear chassis. Various brackets used in bear chassis for the development of all automobiles, including commercial vehicles, play a role of connecting the components required for driving and operating the car to the car body. In commercial vehicles, components necessary for operation are installed in the bear chassis; that is, the bear chassis of commercial vehicles is a space where the devices required for driving and operating the vehicle are installed. The devices required for the configuration of the vehicle are drive, brake, exhaust and steering, etc. These devices are basically connected to the body, the front axis, or the rear axis. The part interlinking the apparatuses required for the vehicle drive to the car body or axis is bracket. In this study, we analyzed the boundary conditions to evaluate the stability of the three brackets that connect the components of the car to the front axis of the new type of 30-seater bus in the development process. In order to analyze the boundary conditions, the boundary conditions according to the driving condition of the vehicle were classified. For stress analysis to evaluate the stability of brackets according to the driving state of the vehicle, it is reasonable to give the bracket a boundary condition of harsh conditions.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.608-613
• /
• 2002

In this paper we developed the MPC sensor for steering control and steering control of the AGVDS(Autonomous Guided Vehicle Driving System) for Durability test. Among durability tests, the accelerated durability test has been widely used to evaluate the durability of vehicle structure and chassis parts in a short period of time on the designed road that has severe surface conditions. However it increased the drivers fatigue mainly caused by the severe driving conditions. The driver's difficulty to maintain the constant speed and control the steering wheel reduces the reliability of test results. In addition to the general detecting sensor for steering control was restricted by surrounding condition. So we need to develop steering control sensor was robust in the bad driving condition. In this paper we developed steering control sensor using magnetic induction which is robust in the bad driving condition and implemented the AGVDS.

• Science of Emotion and Sensibility
• /
• v.6 no.3
• /
• pp.1-11
• /
• 2003

The purpose of the present driving simulation study was to examine the effect of cellular-phone use on driving performance when required driving speeds were systematically varied(60, 80, 100, or 120km/h) while either using cellular-phones(experimental condition; Hands-Free or Hands-Held) or not(control condition). Driving performance was measured both by longitudinal vehicle control(i.e., variabilities in driving speed and headway) and lateral vehicle control(variabilities in lane position). The results can be summarized as followings: (1) The significant difference in driving speed variation between the two cellular-phone usage conditions was found only at relatively higher driving speed conditions(i.e., over 80km/h). (2) Only in the experimental condition where cellular-phone was required to be used while driving, the magnitudes of variation in driving speed, headway and lane position were gradually increased as the required driving speeds were increased(this tendency was not found in control condition). And. (3) the dependent measures of this study appeared to suggest that cellular-phone usage itself (rather than the types of cellular-phone) had significant impact on driving performance. Finally, implication and issues related to this study were discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2013

Recently, the automotive technology has developed with electronics and information technology as convergence technology while vehicles had been regarded as machines. Moreover, vehicles are becoming more intelligent and safer devices, assembly of advanced technologies by customers' demand. Even though all of installations of vehicle have attracted as diverting devices, it cause drivers' mistakes like delay of response on traffic condition. Here, we proposed the Field Operational Test (FOT) environment which could be used as driving and road conditions collector(Vehicle motion, Traffic condition, Driver input, Driver state, etc.) for researches about Driver Friendly Intelligent System(SCC, LDWS, etc.), Human Vehicle Interface(Driving Workload, etc.) and Economic Drive Model. Furthermore driving patten and fuel consumption patten of drivers were analyzed by measured data and direction of future research was suggested.