• 한국항공우주학회지
• /
• 제48권4호
• /
• pp.255-267
• /
• 2020

SLD 조건은 직경이 50㎛ 이상인 과냉각대형액적의 분포가 지배적인 결빙 환경을 뜻한다. SLD 조건에서는 액적의 큰 크기로 인해 wall-droplet interaction, deformation 등의 물리적 현상이 착빙 과정에 중요한 영향을 미친다. 그에 따라 SLD 효과를 수치적으로 모사하기 위한 다양한 연구가 수행되었고, 부착률을 수정하는 후처리 기법을 통해 wall-droplet interaction 현상을 고려하는 방법이 제안되었다. 그러나 이 방법은 액적이 충돌하는 벽면 특성을 제대로 고려하지 않는 반경험식(Wright Model)을 사용하기 때문에 착빙 영역에서 여전히 부착률과 부착 한계를 과대 예측한다. 이 문제를 해결하기 위해 본 연구에서는 착빙 영역을 세 개의 영역으로 구분하였다. 그리고 벽면 특성을 고려하는 Bai and Gosman rebound 모델을 바탕으로 개발한, 새로운 wall-droplet interaction 모델을 후처리 기법에 도입했다. 그리고 액적의 항력계수를 증가시키는 deformation 현상을 반영하기 위해 3가지 deformation 모델을 비교·분석하여 가장 적합한 모델을 선정했다. 앞의 내용을 바탕으로 개발한 SLD 결빙 예측 코드를 검증하기 위해 실험 데이터를 활용하여 해석을 수행했다. 그 결과 수정된 후처리 기법은 착빙 영역에서 rebound 현상에 의한 부착률 감소를 더욱 크게 예측하였고 부착 한계와 부착률 크기를 예측하는 데 있어 향상된 정확성을 보여줬다. 그리고 deformation에 의한 항력계수의 증가를 가장 크게 결정하는 Wiegand model이 실험과 가장 유사한 것을 확인할 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.374-383
• /
• 2001

The spray/wall interaction is considered as an important phenomenon influencing air-fuel mixing in the internal combustion engines. In order to adequately represent the spray/wall interaction process, impingement regimes and post-impingement behavior have been modeled using experimental data and conservation constraints. The modeled regimes were stick, rebound, spread and splash. The tangential velocities of splashing droplets were obtained using a theoretical relationship. The continuous phase was modeled using the Eulerian conservation equations, and the dispersed phase was calculated using a discrete droplet model. The numerical simulations were compared to experimental results for spray impingement normal to the wall. The predictions for the secondary droplet velocities and droplet sizes were in good agreement with the experimental data.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.726-739
• /
• 2003

A multi-dimensioanl model is being increasingly used to predict the thermo-flow field in the gas turbine combustor. This article addresses an integrated survey of modeling of the liquid spray formation and fuel distribution in gas turbine with high-shear nozzle/swirler assembly. The processes of concern include breakup of a liquid jet injected through a hole type orifice into air stream, spray-wall interaction and spray-film interaction, breakup of liquid sheet into ligaments and droplet,5, and secondary droplet breakup. Atomization of liquid through hole nozzle is described using a liquid blobs model and hybrid model of Kelvin-Helmholtz wave and Rayleigh-Taylor wave. The high-speed viscous liquid sheet atomization on the pre-filmer is modeled by a linear stability analysis. Spray-wall interaction model and liquid film model over the wall surface are also considered.

• 한국항공우주학회지
• /
• 제40권8호
• /
• pp.647-654
• /
• 2012

외부 환경조건에 의한 항공기 위협인자로서 과냉각 대형 액적은 그 중요성이 지속적으로 보고되고 있다. 이러한 대형 액적의 거동은 상대적으로 작은 액적과 달리 그 형태가 변화하며 액적이 표면과 충돌시 파편이 발생하는 등 다양한 물리적 특성을 나타낸다. 이러한 대형 액적의 거동을 시뮬레이션 하기 위해 비정렬 격자계 기반 2차원 압축성 Navier-Stokes 코드와 액적 거동 시뮬레이션 코드를 개발하였다. 또한 대형 액적의 물리적 현상을 모사하기 위해 반경험적 기법에 기반한 액적항력모델과 액적-고체표면 충돌 모델을 기존 액적장 지배방정식의 액적항력계수 및 경계면의 수치적 경계조건으로 적용하였다. 그 결과 풍동 시험과 액적충돌 영역 및 최대 축적율은 매우 유사하게 나타난 반면 NACA23012 익형의 아랫면 주위 축적율의 경향은 풍동 시험보다 다소 크게 나타났다.

• 한국분무공학회지
• /
• 제25권2호
• /
• pp.60-67
• /
• 2020

Despite its benefit in engine thermal efficiency, gasoline-direct-injection (GDI) engines generate substantial particulate matter (PM) emissions compared to conventional port-fuel-injection (PFI) engines. One of the reasons for this is that the spray collapse caused by the spray-to-spray interaction forms the locally rich fuel-air mixture and increases the fuel wall film. Previous studies have investigated the spray collapse phenomenon through the macroscopic observation of spray behavior using laser optical techniques, but it is somewhat difficult to understand the interaction between sprays that is initiated in the near-nozzle region within 10 mm from the nozzle exit. In this study, the spray structure, droplet size and velocity data were obtained using an X-ray imaging technique from the near-nozzle to the downstream of the spray to investigate the spray-to-spray interaction and discuss the effects of spray collapse on local droplet size and velocity distribution. It was found that as the ambient density increases, the spray collapse was promoted due to the intensified spray-to-spray interaction, thereby increasing the local droplet size and velocity from the near-nozzle region as a result of droplet collision/coalescence.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.86-100
• /
• 1998

The impingement of the fuel spray on the wall within the combustion chamber in compact high-pressure injection engines and on the intake port wall in port-fuel-inje- ction type engines is unavoidable. It is important to understand the characteristics of impinging spray because it influences on the rate of fuel evaporation and droplet distrib- ution etc. In this study, the numerical study for the characteristics of spray/wall interaction is performed to test the applicability and reliability of spray/wall impingement models. The impingement models used are stick model, reflect model, jet model and Watkins and Park's model. The head of wall-jet eminating radilly outward from the spray impingement site contains a vortex. Small droplets are deflected away from the wall by the stagnation flow field and the gas wall-jet flow. While the larger droplets with correspondingly higher momentum are impinged on the wall surface and them are moved along the wall and are rolled up by wall-jet vortex. Using the Watkins and Park's model the predicted results show the most reasonable trend. The rate of increase of spread and the height of the developing wall-spray is predicted to decrease with increased ambient pressure(gas density).

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.159-164
• /
• 2009

The water droplet motion and the interaction between the droplets in a PEMFC air flow channel with multiple pores, through which water emerges, is studied numerically by solving the equations governing the conservation of mass and momentum. The liquid-gas interface is tracked by a level set method which is based on a sharp-interface representation for accurately imposing the matching conditions at the interface. The method is modified to implement the contact angle conditions on the walls and pores. The dynamic interaction between the droplets growing on multiple pores while keeping the total water flow rate through pores constant is investigated by conducting the computations until the droplet motion exhibits a periodic pattern. The numerical results show that the droplet merging caused by increasing the number of pores is not effective for water removal and that the contact angle of channel wall strongly affects water management in the PEMFC air flow channel.

• 한국전산유체공학회지
• /
• 제2권2호
• /
• pp.80-88
• /
• 1997

A new wall impaction model for diesel spray is described in this paper. The gas phase is modelled in terms of the Eulerian continuum conservation equations of mass, momentum, energy and fuel vapour fraction. The liquid phase is modelled following the discrete droplet model approach. The droplet parcel contains many thousands of drops assumed to have the same size, temperature and velocity components. The droplet parcel equations of trajectory, momentum, mass and energy are written in Lagrangian form. The new drop-wall interaction model is proposed, which is based on experimental investigations on individual drops, and it is applied for the general non-orthogonal grid. The model is then assessed through comparison with experiments over a wide range of test conditions of sprays. The results are in good agreement with experimental data.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1996년도 춘계 학술대회논문집
• /
• pp.137-142
• /
• 1996

A new wall impaction model for spray and its assessment are described in this paper. The gas phase is modelled in terms of the Eulerian continuum conservation equations of mass, momentum, energy and fuel vapour fraction. The liquid phase is modelled following the discrete droplet model approach. The droplet parcel contains many thousands of drops assumed to have the same size, temperature and velocity components. The droplet parcel equations of trajectory, momentum, mass and energy are written in Lagrangian form. The new drop-wall interaction model is proposed, which is based on experimental investigations on individual drops, and it is applied for the general non-orthogonal gird. The model is then assessed through comparison with experiments over a wide range of test conditions of sprays. The results are in good agreement with experimental data.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권1호
• /
• pp.47-53
• /
• 1999

Small compression-ignition direct injection engines have been developed as a measure to improve a fuel efficiency and reduce harmful exhaust gases. Those small engines generally employ high injection pressure increase on the spray impacting on a wall is discussed in this paper. The gas phase is modelled by the Eulerian continuum conservation equations of mass momentum energy and fuel vapour fraction. The liquid phases is modelled following the discrete droplet model approach in Lagrangian form and the droplet wall interaction is modelled as a func-tion of the velocity normal to impaction lands. The droplet distributions vapor fractions and gas flows are analyzed in various injection pres-sure cases. The penetrations of wall spray and vapor increase and the Sauter mean diameter decreases with increasing injection pressure.