• The Korean Journal of Food And Nutrition
• /
• v.22 no.2
• /
• pp.199-204
• /
• 2009

For the purpose of developing a safe & hygienic manufacturing method to acquire low levels of benzo(a)pyrene in black and red ginseng products, this study investigated the effects of steam- and dry-processing temperatures on benzo(a)pyrene production in ginseng. By the red ginseng with a fix dry-process temperature of $50^{\circ}C$ and setting the steam-process temperature between $80{\sim}120^{\circ}C$, an extremely small amount(0.1 ppb) of benzo(a)pyrene was produced, indicating there was no relationship between the steam-temperature and benzo(a)pyrene production. On the other hand, when the red and black ginseng were steamed at the fixed temperature of $100^{\circ}C$ and dried at various temperatures between $50{\sim}120^{\circ}C$, the amount of benzo(a)pyrene produced was closely connected with the dry-temperature, and increased with higher drying temperatures. Upon repeating the steam and dry process nine times, in which the steam-temperature was set at $100^{\circ}C$ and the dry-temperature at $50^{\circ}C$, higher amount of benzo(a)pyrene were produced in red and black ginseng, respectively, with increasing steam- and dry-processing time. However, the level of benzo(a)pyrene still remained extremely small(below 0.12 ppb), showing a maximum amount in the black ginseng that was steamed and dried nine times. This suggests that the fine root of ginseng may be carbonized by increasing the number of times it is steam- and dry-processed. From the above results, this study determined that the optimum temperatures for manufacturing red and black ginseng products with safe levels of benzo(a)pyrene would be a temperature between 80 and $120^{\circ}C$ for steaming and a temperature less than $50^{\circ}C$ for drying.

• Fibers and Polymers
• /
• v.5 no.1
• /
• pp.19-24
• /
• 2004

PET yarns textured at different texturing conditions were treated with superheated steam or dry heat at different temperatures for different times. The effects of the treatment conditions on the thermomechanical and structural changes of the yarn were examined by shrinkage, X-ray diffraction and birefringence measurements. With increase in superheated steam temperature, the crystalline orientation factor and birefringence decreased, whereas crystal size increased. Dry heat treatment had a smaller effect on shrinkage and structural properties in comparison with superheated steam treatment. The additional shrinkage after texturing process was investigated. The effect of heat-setting in both media was more significant at $200^{\circ}C$. The time dependence of the properties was not linear.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.255-257
• /
• 2012

Epoxy resin without any hardener can harden in the presence of hydroxide ions in cement mortars and concretes at ambient temperature. The purpose of present study is to examine the hardening properties of hardener-free epoxy-modified mortars by curing conditions. The hardener-free epoxy-modified mortars using diglycidyl ether of A epoxy resin are prepared with various polymer-cement ratios, and subjected to initial moist/dry curing, initial steam(90℃) curing, initial steam/heat(80℃, 100℃) curing.As a result, degree of hardening of epoxy resin in initial moist/dry cured, initial steam cured and initial steam/heat(80℃) cured hardener-free epoxy-modified mortars is decreased with increasing polymer-cement ratio. However, it is markedly improved with additional dry-curing periods. On the other hand, regardless of the polymer-cement ratio and dry curing periods, degree of hardening of hardener-free epoxy-modified mortars with initial steam/heat(100℃) cure is over 95%.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2006-2011
• /
• 2010

The superheater in the thermal power plant makes the wet steam into the dry steam with high temperature and high pressure by using the boiler heat. The dry steam pressure rotates the turbine-generator system. The efficiency and life time of the boiler heavily depends on the steam temperature regulation. The steam temperature can be deviated from the reference by the MW demand of the power plant. It is therefore required that the PI(proportional-integral) controller should be robust against the disturbance such as the MW demand. In this paper, the PI controller with the integral state predictor is proposed and applied to regulate the steam temperature of the superheater, and it is compared with the conventional PI controller operated in the thermal power plant in view of control performance.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.441-444
• /
• 2006

Extrusion molding concrete panel is cured two times, that is the steam curing at atmospheric pressure and a high-pressure steam curing(autoclaving). Steam curing at atmospheric pressure is done before autoclaving and to acquire the proper strength for treat in process. Though this curing is the important factor on the quality of product and the speed in manufacturing process, it was not evaluated properly so far. Because of ignorance about curing, some engineers even think that the dry curing is better than the steam curing. This study is to investigate the properties of specimen according to variation of curing conditions in the coring chamber such as laboratory scale, pilot plant, and commercial plant. As estimating, in case of steam curing at atmospheric pressure to make extrusion molding concrete panel, moisture curing is better than dry curing and the desirable maximum temperature in curing chamber is about $50^{\circ}C$.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2702-2713
• /
• 2022

A steam generator tube rupture accompanying a core damage may cause the fission product to be released to environment bypassing the containment. In such an accident, the steam generator is the major path of the radioactive aerosol release. AEOLUS facility, the scaled-down model of Korean type steam generator, was built to examine the aerosol removal in the steam generator during the steam generator tube rupture accident. Integral and separate effect tests were performed with the facility for the dry and flooded conditions, and the decontamination factors were presented for different tube configurations and submergences. The dry test results were compared with the existing test results and with the analyses to investigate the aerosol retention physics by the tube bundle, with respect to the particle size and the bundle geometry. In the flooded tests, the effect of submergence were shown and the retention in the jet injection region were presented with respect to the Stokes number. The test results are planned to be used to constitute the aerosol retention model, specifically applicable for the analysis of the steam generator tube rupture accident in Korean nuclear power plants to evaluate realistic fission product behavior.

• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.870-880
• /
• 2016

A steam generator tube rupture (SGTR) event with a stuck-open safety relief valve constitutes one of the most serious accident sequences in pressurized water reactors (PWRs) because it may create an open path for radioactive aerosol release into the environment. The release may be mitigated by the deposition of fission product particles on a steam generator's (SG's) dry tubes and structures or by scrubbing in the secondary coolant. However, the absence of empirical data, the complexity of the geometry, and the controlling processes have, until recently, made any quantification of retention difficult to justify. As a result, past risk assessment studies typically took little or no credit for aerosol retention in SGTR sequences. To provide these missing data, the Paul Scherrer Institute (PSI) initiated the Aerosol Trapping In Steam GeneraTor (ARTIST) Project, which aimed to thoroughly investigate various aspects of aerosol removal in the secondary side of a breached steam generator. Between 2003 and 2011, the PSI has led the ARTIST Project, which involved intense collaboration between nearly 20 international partners. This summary paper presents key findings of experimental and analytical work conducted at the PSI within the ARTIST program.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.4
• /
• pp.308-314
• /
• 2017

This study was conducted with two ruminally cannulated Holstein steers to examine the effect of micronized and steam flaked corn on ruminal fermentation characteristics. The in situ dry matter degradability after 48 h incubation was the highest (P<0.05) at micronized corn (2.5 mm thickness) compared with steam flaked corn treatments. The steam flacked corn (3.3 mm thickness) was degraded lower (P<0.05) than the 2.9 and 3.1 mm thickness of steam flacked corn. Effective dry matter degradability and the rate of constant were the highest (P<0.05) at micronized corn (2.5 mm thickness) compared with steam flaked corns as well. The in vitro dry matter degradability after 48 h incubation was tended to higher (P=0.088) at micronized corn (2.5 mm thickness) than steam flaked corns, whereas there is no significantly difference between steam flaked corn treatments. Total volatile fatty acid concentration was higher at steam flaked corn (2.9 mm thickness) than micronized corn (2.5 mm thickness) and steam flaked corn (3.1 and 3.3 mm thickness). The acetate : propionate ratio was the highest (P=0.008) at steam flaked corn (2.9 mm thickness) and the lowest (P=0.008) at micronized corn (2.5 mm thickness). Total gas and methane production after 48h ruminal incubation was the highest (P=0.001) at micronized corn (2.5 mm thickness) compared with steam flaked corns. According to these results, the thickness of steam flaked corn as resulted corn processing is believed to do not affect methane production. However, further study is needed to better understand the present results to verify the correlation between corn processing method and their thickness on methane production using the same thickness corns by difference processing methods.

• Korean Journal of Food Science and Technology
• /
• v.15 no.3
• /
• pp.307-313
• /
• 1983

Soybeans ans black-eyed peas, chosen as test samples of dry beans, were subjected to soaking and cooking treatments to develop quick cookig methods and study their effects on quality of cooked products. The results of the study are summarized as follow: 1. Of the soaking methods tested, soaking soybeans in 3% sodium bicarbonate (SBC) solution and black-eyed peas in 0.5-1% SBC solution followed by cooking them in water at $95-100^{\circ}C$ required 40 minutes and 10 minutes of cooking time, respectively. When compared to 180 minutes of cooking time for soybeans and 40 minutes of that for black-eyed peas by conventional cooking method (Control), soaking dry beans in optimum SBC solutions reduced cooking time by over 80%. 2. Among cooking methods tested, steam cooking at $121^{\circ}C$ was the most effective one in reducing cooking time of soybeans (15 min.). Black-eyed peas sacked in water required 6 minutes of cooking time in 1% SBC solution at $95-100^{\circ}C$, and 5 minutes of that in steam at $121^{\circ}C$. 3. Quality of cooked beans with optimum texture was evaluated by sensory panel and Gardner Color Difference Meter. Beans cooked in steam at $121^{\circ}C$ had better overall quality than those cooked by other methods. Beans soaked in optimum SBC solution had quality as good as control, whereas beans cooked in SBC solution had worse quality than control. 4. These results indicated that cooking time of soybeans could be drastically reduced by either steam cooking at $121^{\circ}C$ or soaking in 3% SBC solution followed by cooking in water at $95-100^{\circ}C$. Cooking time of black-eyed peas could be significantly shortened by either steam cooking at $121^{\circ}C$ or soaking in 0.5-1% SBC solution followed by cooking in water at $95-100^{\circ}C$.

• Transactions of the Korean hydrogen and new energy society
• /
• v.15 no.4
• /
• pp.301-308
• /
• 2004

The methane reforming with $CO_2$ and steam for manufacture of synthesis gas over $Ni/ZrO_2$ catalyst was investigated. Mixed reforming carried out $CO_2$ dry reforming with $O_2$ and steam for development of DME process in pilot plant. To improve a catalyst deactivation by coke formation, the mixed reforming added carbon dioxide and steam as a oxidizer of the methane reforming was suggested. The result of experiments over commercial catalyst in $CO_2$ dry reforming has shown that the catalyst activity decrease rapidly after 20 hours. In case of $NiO-MgO/Al_2O_3$ catalyst, the deactivation of 20 percent after 30 hours was occurred. The activity of Ni/C catalyst still was not decreased dramatically after 100 hours. The effect of $H_2$ reforming with steam over $Ni/CO_2$ catalyst obtained the optimal conversion of methane and carbon dioxide, and could be produced synthesis gas at ratio of $H_2/CO$ under 1.5.