• 정보처리학회논문지B
• /
• 제16B권2호
• /
• pp.173-180
• /
• 2009

영어 작문 자동 채점 시스템은 수험자가 작성한 영작문을 사람의 개입 없이 시스템이 처리하여 점수나 피드백을 줄 수 있는 시스템이다. 본 논문에서 개발한 영작문 자동 채점 시스템은 단어 단계, 구문 단계, 의미 단계의 세 단계 처리 과정을 통해서 오류를 탐지하고 탐지된 오류 개수를 기반으로 채점 점수를 결정한다. 이와 같이 독립적인 세 단계의 처리 과정에서 오류를 탐지하므로 동일한 오류 현상에 대해 서로 다른 단계에서 서로 다른 이름으로 오류를 탐지하는 경우가 발생할 수 있다. 이는 결과적으로 전체 시스템의 채점 점수의 정확도를 저하시키는 원인이 된다. 본 논문에서는 동일한 오류 현상에 대해 서로 다른 단계에서 탐지된 오류 쌍을 '중복 보고 오류'라고 정의한다. 본 논문에서는 중복 보고 오류를 찾는 방법을 제안하고 중복 보고 오류 제거를 통해 영작문 자동 채점 시스템의 채점 점수를 향상시킬 수 있음을 보인다.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.167-184
• /
• 1999

The purpose of this study was to evaluate and compare the at of denture bases processed by injection pressing technic using laser scanner of reverse engineering technic. The auther duplicated 20 maxillary edentulous models and 20 mandibular edentulous models, which were scanned on HYSCAN 45C 3D BCANNER(Hymarc Co., Canada). The scanned data were stored in the personal computer using SURFACER (Imageware Co. U.S.A.) software program. After 40 dentures were cured by PERform Inkovac system, SR-Ivocap system, Palajet system, and Sulfon system, they were stored in water at room temperature fir 24 hours. The dentures were scanned on HYSCAN 45C 3D SCANNER(Hymarc Co., Canada). The scanned data were stored in the personal computer using SURFACER (Imageware Co., U.S.A.) software program. By overlapping two images using the same program, the fit between two surfaces was scaled by positive and negative errors. The obtained results were as follows 1. In the upper denture, most of the positive errors occurred on the lingual side of anterior alveolar ridge and the negative errors were on the flange of denture bases. 2. In the lower denture, most of the positive errors occurred on the inner side of lingual flange and the negative errors were on the border of anterior labial flange areas, 3. There were no statistical differences among the positive errors of the four types of injection denture curing methods and also no statistical differences between negative errors except only in negative maximum errors. 4. In PERform system and SR-Ivocap system, they have the tendency of inaccurate at of lower denture bases comparing to that of upper denture bases. 5. The negative error scales were greater than the positive error scales in all types of injection denture curing methods.

• 품질경영학회지
• /
• 제33권4호
• /
• pp.88-95
• /
• 2005

Multistage screening is a common practice when a component has a critical effect on the function of the assembly. A defect in a component might incur malfunction of an electronic device, resulting in a great amount of loss. Multistage screening, including duplicated screening inspections, may provide a good solution for this problem when inspection errors are present. In the company studied here, the manufacturing process of the multiple layer chip capacitor includes two-stage screening. In the first stage, screening inspection is performed repeatedly until no defects are found in the lot. In the second stage, sampling inspection is performed by a group of experts prior to shipment. In this article, we review the procedure used in the field and suggest a revised model of the multiple screening procedure and solution method for this situation. The usefulness of the proposed model is discussed through a practical example.

• 한국정보통신학회논문지
• /
• 제18권1호
• /
• pp.63-71
• /
• 2014

본 논문에서는 Active-Active 방식의 웹서버 이중화 방법에 관해 연구하였다. Rsync과 crontab을 이용하여 웹서버간에 주기적인 복사가 이루어지도록 하여 동일한 상태를 유지시켰다. 로드밸런싱서버가 웹서버를 교대로 실행하여 부하를 분산하고, 빠른 서비스가 제공되도록 하였다. 또한 임의의 웹서버에 장애가 발생하더라도 또 다른 웹서버에 의해 서비스가 계속 유지되도록 하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.940-952
• /
• 2007

It is found that there are many serious errors in deriving the existing governing equations of motion for a wheel-axle set negotiating an arbitrarily changing radius curve by Vijay K. Garg and Rao V. Dukkipati. Among other things, despite the hypothesis on arbitrarily changing radius of curve, there had been no taking a time derivative of the radius R in the first half of the derivation. Even if the D'lambert force arising from the centrifugal acceleration of vehicle body or bogie was appropriately taken into account while calculating cant deficiency, it is unnecessarily duplicated in the force vectors of governing equations. The graphical model given in Fig. 5.15 is not enough to follow those developed expressions from both physical and structural points of view. Besides, there are some blunders in assigning plus or minus sign not to be regarded as simple typographic ones and similar mistakes are committed in deriving creep force expressions as in the case of a wheel-axle set on a tangent track.

• 대한치과의사협회지
• /
• 제21권10호통권173호
• /
• pp.793-797
• /
• 1983

The aim of this article is to review the literature concerning the general aspects of a fully adjustable articulator. A computer can play back when the informations are put into the computer and programmed. A fully adjustable articulator is a computer like device. Even though the fully adjustable articulator is designed precisely, it can not work without inputing the informations and programming into the articulator. That is the reason why various factors controlling the mandibular movements should be recorded and duplicated on articulator avoiding the possible errors.

• 한국정보통신학회논문지
• /
• 제17권1호
• /
• pp.90-100
• /
• 2013

본 논문에서는 기존의 Active-Standby 방식의 이중화가 아닌 Active-Active 방식의 DNS (Domain Name System) 이중화에 관해 연구하였다. Active-Active 방식의 DNS 이중화를 위해 1, 2차 DNS 서버 간에는 rsync와 crontab을 이용하여 주기적으로 복사하여 동일한 상태를 유지하고, 1차 혹은 2차 DNS 서버가 장애로 인해 정지되더라도 살아 있는 DNS 서버가 계속해서 서비스를 지속하도록 하였다.

• 대한치과교정학회지
• /
• 제44권2호
• /
• pp.69-76
• /
• 2014

Objective: This study aimed to evaluate the accuracy and precision of polyurethane (PUT) dental arch models fabricated using a three-dimensional (3D) subtractive rapid prototyping (RP) method with an intraoral scanning technique by comparing linear measurements obtained from PUT models and conventional plaster models. Methods: Ten plaster models were duplicated using a selected standard master model and conventional impression, and 10 PUT models were duplicated using the 3D subtractive RP technique with an oral scanner. Six linear measurements were evaluated in terms of x, y, and z-axes using a non-contact white light scanner. Accuracy was assessed using mean differences between two measurements, and precision was examined using four quantitative methods and the Bland-Altman graphical method. Repeatability was evaluated in terms of intra-examiner variability, and reproducibility was assessed in terms of interexaminer and inter-method variability. Results: The mean difference between plaster models and PUT models ranged from 0.07 mm to 0.33 mm. Relative measurement errors ranged from 2.2% to 7.6% and intraclass correlation coefficients ranged from 0.93 to 0.96, when comparing plaster models and PUT models. The Bland-Altman plot showed good agreement. Conclusions: The accuracy and precision of PUT dental models for evaluating the performance of oral scanner and subtractive RP technology was acceptable. Because of the recent improvements in block material and computerized numeric control milling machines, the subtractive RP method may be a good choice for dental arch models.

• 한국정보전자통신기술학회논문지
• /
• 제11권4호
• /
• pp.430-435
• /
• 2018

본 논문에서는 부호 길이가 작은 LCPC 부호에 대한 개선된 복호 방식을 제안하였다. LCPC 부호는 터보 부호나 LDPC 부호에 비해 복잡도가 낮고 요구되는 메모리도 적어 IoT 단말 간 통신에 적합하다. IoT 단말은 에너지가 제한되어 있어서 복잡도가 낮아야 하며 종단 간 지연 시간이 짧아야 하는 경우가 많다. 또한, 전송되는 패킷 길이가 작고 IoT 단말의 신호 처리 능력이 작기 때문에 LCPC 부호 시스템이 가능한 한 간단해야 한다. LCPC 부호는 단일 오류는 모두 정정할 수 있고 2개의 오류 중 일부를 정정할 수 있다. 본 논문에서는 변조기 출력단의 소프트 값을 이용하여 2개의 오류를 모두 정정함으로서 복잡도를 증가시키지 않고서도 비트 오율 성능을 개선하였다. 본 논문에서 제안한 복호 방식을 이용하여 시뮬레이션을 한 결과 기존의 복호 방식에 비해 $10^{-4}$의 비트 오율에서 약 1.1[dB]의 부호 이득을 얻을 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제37권3호
• /
• pp.136-141
• /
• 2012

Objectives: The maintenance of the healthy periodontal ligament cells of the root surface of donor tooth and intimate surface contact between the donor tooth and the recipient bone are the key factors for successful tooth transplantation. In order to achieve these purposes, a duplicated donor tooth model can be utilized to reduce the extra-oral time using the computer-aided rapid prototyping (CARP) technique. Materials and Methods: Briefly, a three-dimensional digital imaging and communication in medicine (DICOM) image with the real dimensions of the donor tooth was obtained from a computed tomography (CT), and a life-sized resin tooth model was fabricated. Dimensional errors between real tooth, 3D CT image model and CARP model were calculated. And extra-oral time was recorded during the autotransplantation of the teeth. Results: The average extra-oral time was 7 min 25 sec with the range of immediate to 25 min in cases which extra-oral root canal treatments were not performed while it was 9 min 15 sec when extra-oral root canal treatments were performed. The average radiographic distance between the root surface and the alveolar bone was 1.17 mm and 1.35 mm at mesial cervix and apex; they were 0.98 mm and 1.26 mm at the distal cervix and apex. When the dimensional errors between real tooth, 3D CT image model and CARP model were measured in cadavers, the average of absolute error was 0.291 mm between real teeth and CARP model. Conclusions: These data indicate that CARP may be of value in minimizing the extra-oral time and the gap between the donor tooth and the recipient alveolar bone in tooth transplantation.