• Title/Summary/Keyword: Dynamic balance

Search Result 1,023, Processing Time 0.03 seconds

Field study of 5kW class PEMFC system (5kW급 고분자전해질 연료전지 시스템 실증연구)

  • Lee, SooJae;Choi, Dae Hyun;Jun, HeeKwon
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2011.05a
    • /
    • pp.87.1-87.1
    • /
    • 2011
  • The residential Fuel Cell system has high efficiency of 85% with transferring natural gas to electrical power and heat, directly and it is a friendly environmental new technology in that $CO_2$ emission can reduce 40% compared with conventional power generator and boiler. The residential fuel cell system consists of two main parts which have electrical and hot storage units. The electrical unit contains a fuel processor, a stack, an inverter, a control unit and balance of plant(BOP), and the cogeneration unit has heat exchanger, hot water tank, and auxiliaries. 5kW class fuel process was developed and tested from 2009, it was evaluated for long-term durability and reliability test including with improvement in optimal operation logic. Stack development was crried out through improvement of design and evaluation protocol. Development of system controller was successfully accomplished through strenuous efforts and original control logic was optimized in 5kW class PEMFC system. In addition, we have been focused on development of system process and assembly technology, which bring about excellent improvement of reliability of system. The 5kW class PEMFC system was operated under dynamic conditions for 1,000 hours and it showed a good performance of total efficiency and durability.

  • PDF

A Simulation Study on the Clamshell-type Missile Airframe Separation (크램쉘형 유도탄 기체분리 시뮬레이션 연구)

  • Kim, Goo;Hur, Ki-Hoon
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.36 no.4
    • /
    • pp.375-383
    • /
    • 2008
  • Design of a weapon-carrier type of missile requires to provide a highly reliable mechanism of airframe separation and air stabilizer deployment which enables the safe release of payload at high-speed flight conditions. This mechanism is characterized by a relative dynamic motion of multiple separated bodies, proceeding as swiftly as hundreds of milli-seconds, so that the use of modeling & simulation(M&S)techniques could play a crucial role in the design. This paper presents an M&S technique which has been developed for a design of anti-submarine missile employing a clamshell type of airframe separation, and shows some major results of simulation compared to available flight test results. Emphasis of the current study was laid on a proper balance between the quick calculation, which is essential for practical design application, and the credibility of the results.

Tail Rotor Design and Thrust Test for a Roll-balanced Agricultural Unmanned Helicopter (농용 무인헬리콥터의 가로균평을 위한 테일부 설계 및 추력 시험)

  • Koo, Young-Mo;Bae, Yeong-Hwan;Seok, Tae-Su;Shin, Shi-Kyoon;Park, Hee-Jin
    • Journal of Biosystems Engineering
    • /
    • v.35 no.5
    • /
    • pp.302-309
    • /
    • 2010
  • Aerial application using an unmanned agricultural helicopter would allow precise and timely spraying. The attitude of a helicopter depends on a number of dynamic variables for roll-balanced flight. Laterally tilting behavior of a helicopter is a physically intrinsic phenomenon while hovering and forwarding. In order to balance the fuselage, the rotor should be counter-tilted, resulting in the biased down-wash. The biased spraying toward right side causes uneven spray pattern. In this study, a raised tail rotor system for the roll-balanced helicopter was studied. Thrust of the tail rotor system was measured and theoretically estimated for the fundamental database of the roll-balanced helicopter design. The estimated tail thrust and roll-moment would be used to design the raising height of tail rotor and roll balancing dynamics. The unmanned agricultural helicopter required the tail rotor thrust of about 39.2 N (4.0 kgf) during hovering with a payload of 235.4 N (24 kgf). A raised tail rotor system would compensate for the physical tilt phenomena. A further attitude control system of helicopter would assist roll-balanced aerial spray application.

A study on the ecosystem-based management system for fisheries resources in Korea (생태계 차원에서의 수산자원관리 방안 연구)

  • Zhang, Chang-Ik
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.42 no.4
    • /
    • pp.240-258
    • /
    • 2006
  • The potential of ecosystem-based fisheries management is recently recognized to be very important to improve the sustainability of fisheries resources. Under the depressed condition of many fisheries resources, this recognition has been expanded and more effort has been taken to improve this approach. Taking ecosystem concept includes the use of other tools of management in addition to fisheries regulation, such as stock and productivity enhancement, provision of physical structure, or marine protected areas. In the ecosystem-based fisheries management approach, it would require to holistically consider ecological interactions of target species with predators, competitors, and prey species, the effects of climate on fisheries ecology, the complex interactions between fishes and their habitat, and the effects of fishing on fish stocks and their ecosystem. Fisheries management based upon the understanding of these factors can prevent significant and potentially irreversible changes in marine ecosystems caused by fishing. A useful approach for analyzing tropho-dynamic interactions and mass-balance in marine ecosystems is introduced to demonstrate the complexity and usefulness of the ecosystem approach, which was applied to a small ecosystem in Korea. Korea should seriously consider to take the ecosystem-based approach to fisheries management, since most major fish stocks are currently depleted due to many reasons such as overfishing, land reclamation and coastal pollution.

Deadline Constrained Adaptive Multilevel Scheduling System in Cloud Environment

  • Komarasamy, Dinesh;Muthuswamy, Vijayalakshmi
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.9 no.4
    • /
    • pp.1302-1320
    • /
    • 2015
  • In cloud, everything can be provided as a service wherein a large number of users submit their jobs and wait for their services. hus, scheduling plays major role for providing the resources efficiently to the submitted jobs. The brainwave of the proposed ork is to improve user satisfaction, to balance the load efficiently and to bolster the resource utilization. Hence, this paper roposes an Adaptive Multilevel Scheduling System (AMSS) which will process the jobs in a multileveled fashion. The first level ontains Preprocessing Jobs with Multi-Criteria (PJMC) which will preprocess the jobs to elevate the user satisfaction and to itigate the jobs violation. In the second level, a Deadline Based Dynamic Priority Scheduler (DBDPS) is proposed which will ynamically prioritize the jobs for evading starvation. At the third level, Contest Mapping Jobs with Virtual Machine (CMJVM) is roposed that will map the job to suitable Virtual Machine (VM). In the last level, VM Scheduler is introduced in the two-tier VM rchitecture that will efficiently schedule the jobs and increase the resource utilization. These contributions will mitigate job iolations, avoid starvation, increase throughput and maximize resource utilization. Experimental results show that the performance f AMSS is better than other algorithms.

Evaluation of seismic assessment procedures for determining deformation demands in RC wall buildings

  • Fox, Matthew J.;Sullivan, Timothy J.;Beyer, Katrin
    • Earthquakes and Structures
    • /
    • v.9 no.4
    • /
    • pp.911-936
    • /
    • 2015
  • This work evaluates the performance of a number of seismic assessment procedures when applied to a case study reinforced concrete (RC) wall building. The performance of each procedure is evaluated through its ability to accurately predict deformation demands, specifically, roof displacement, inter-storey drift ratio and wall curvatures are considered as the key engineering demand parameters. The different procedures include Direct Displacement-Based Assessment, nonlinear static analysis and nonlinear dynamic analysis. For the latter two approaches both lumped and distributed plasticity modelling are examined. To thoroughly test the different approaches the case study building is considered in different configurations to include the effects of unequal length walls and plan asymmetry. Recommendations are made as to which methods are suited to different scenarios, in particular focusing on the balance that needs to be made between accurate prediction of engineering demand parameters and the time and expertise required to undertake the different procedures. All methods are shown to have certain merits, but at the same time a number of the procedures are shown to have areas requiring further development. This work also highlights a number of key aspects related to the seismic response of RC wall buildings that may significantly impact the results of an assessment. These include the influence of higher-mode effects and variations in spectral shape with ductility demands.

Energy-based damage-control design of steel frames with steel slit walls

  • Ke, Ke;Chen, Yiyi
    • Structural Engineering and Mechanics
    • /
    • v.52 no.6
    • /
    • pp.1157-1176
    • /
    • 2014
  • The objective of this research is to develop a practical design and assessment approach of steel frames with steel slit walls (SSWs) that focuses on the damage-control behavior to enhance the structural resilience. The yielding sequence of SSWs and frame components is found to be a critical issue for the damage-control behavior and the design of systems. The design concept is validated by the full-scale experiments presented in this paper. Based on a modified energy-balance model, a procedure for designing and assessing the system motivated by the framework regarding the equilibrium of the energy demand and the energy capacity is proposed. The damage-control spectra constructed by strength reduction factors calculated from single-degree-of-freedom systems considering the post stiffness are addressed. A quantitative damage-control index to evaluate the system is also derived. The applicability of the proposed approach is validated by the evaluation of example structures with nonlinear dynamic analyses. The observations regarding the structural response and the prediction during selected ground motions demonstrate that the proposed approach can be applied to damage-control design and assessment of systems with satisfactory accuracy.

Design of Samduck Underground Parking Lot and Park in Anyang (안양 삼덕 지하주차공원 설계)

  • Choi Shin-Hyun
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.33 no.5 s.112
    • /
    • pp.114-122
    • /
    • 2005
  • Anyang city performed a design competition for the existing paper mill site and this design is the work that was submitted to that competition. The design instructions for the competition were about an organic site which had harmony of aboveground park and underground parking lot, establishment of park planning which is fit for the features of nearby areas, and security of proper parking space. This design criteria set the design concept to a new wave of Anyang by reflecting the design instructions of prize contest and features of the site and developed it as three waves. First, the eco wave, one of three waves, means that it compose the ecological healthy park and urban environment together with restoration and preservation of Suamcheon (stream), and futhermore the waves that the natural resource are maintained in a delicate ecological balance as the water resource of Anyang city are connected to the axis of mountain resource. Secondly, the emotion wave indicates that the wave toward culture and art emotional park that stimulates and fills up the emotion to makes impoverishing modems minds fertile. Thirdly, the health wave means the waves toward a park to keep the sound of minds and bodies of Anyang citizens, and healthy and sound life as well as the waves toward a park to contribute the healthy leap and development of Anyang. These three waves will enrich the park keeping the dynamic relationship mutually and will be a new culture and art code of Anyang city.

PHYSICOCHEMICAL CHARACTERIZATION OF UASB GRANULAR SLUDGE WITH DIFFERENT SIZE DISTRIBUTIONS

  • 안영희;송영진;이유진;박성훈
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2001.04a
    • /
    • pp.172-181
    • /
    • 2001
  • Upflow anaerobic sludge blanket (UASB) system employs granular sludge to treat various wastewaters including landfill leachate. CH$_4$ production of the granules determines overall performance of a UASB reactor. Sludge granules are developed by self-granulation of microorganisms and dynamic balance between granule growth and decay results in coexistence of granules with different sizes in the reactor. In this study, granules taken from a laboratory-scale UASB reactor were classified into 4 groups based on their diameters and their Physicochemical characteristics we were investigated. Each group was analyzed for settling ability, specific methanogenic activity (SMA), and elemental content. Settling ability was proportional to granule diameter. suggesting effective detainment of larger granules in the reactor. When acetate or glucose was used as a substrate, all groups showed relatively slight difference in SMA. However SMA with a volatile fatty acid mixture showed significant increase with granule diameter, suggesting better establishment of syntrophic relationship in larger granules. Larger granules showed higher value of SMA upon environmental changes (i.e., PH, temperature, or toxicant concentration). Comparative analysis of elemental contents showed that content (dry weight %) of most tested elements (iron, calcium, phosphorus, zinc, nickel. and manganese) deceased with granule diameter, suggesting importance of these elements for initial granulation. Taken together, this study verified experimentally that Physicochemical Properties of granules are related to granule size distributions. Overall results of physicochemical characterization supports that larger.

  • PDF

The Development & Effect of an Tailored Falls Prevention Exercise for Older Adults (노인 낙상예방 맞춤운동의 개발 및 효과)

  • Gu, Mee-Ock;Jeon, Mi-Yang;Eun, Young
    • Journal of Korean Academy of Nursing
    • /
    • v.36 no.2
    • /
    • pp.341-352
    • /
    • 2006
  • Purpose: This study was conducted to develop & to determine the effect of an tailored falls prevention exercise for older adults. Method: Subjects consisted of 59 older adults (experimental group : 29, control group : 30) living at nursing homes. Experimental group participated in tailored falls prevention exercise for 16 weeks(3 times a week, 50 min every session). Data were collected before the exercise, 16 weeks & 24 weeks after the beginning of exercise. Results: 1) the experimental group significantly improved the muscle strength of hip extensor & flexor, knee extensor & flexor, ankle dorsiflexor, & plantar flexor compared to the control group. 2) the experimental group significantly decreased the mean time for 10 times chair stand. 3) the experimental group significantly increased the standing time on one leg and the number of heel raise for 30 seconds compared to the control group. In addition more older adults in the experimental group completed the tandem stance & semi-tandem stance for 10 seconds than the control group. 4) The experimental group significantly decreased the mean time of 6m walk and the fall frequency compared to the control group. Conclusions: This results suggest that tailored falls prevention exercise for older adults can improve muscle strength, static & dynamic balance and decrease the fall frequency of older adults.