• 한국문헌정보학회지
• /
• 제39권3호
• /
• pp.263-284
• /
• 2005

본 연구에서는 국내 전자형태 학위논문의 메타데이터 표준요소를 제안하였다. 제안의 근거는 국내 주요 대학의 메타데이터 표준요소와 NDLTD, 학위논문 원문 공동이용협의회에서 채택하고 있는 표준기술요소를 비교한 데이터를 활용하였다. 이와 같은 표준은 이용자에게 이종간 전자도서관에 수록된 학위논문 자료에 대한 통합정보검색 편의성을 제공할 것이다. 제안한 요소는 더블린 코어의 9개 요소와 학위논문이 갖는 특정요소를 고려한 4개 요소 등 14개 메타요소를 선정하였다. 특히 새로이 확장한 메타 요소는 'thesis.degree.name'을 비롯하여 'thesis.degree.level', 'thesis.degree.discipline', 'thesis.degree.grantor' 등이다.

• 한국산업정보학회논문지
• /
• 제5권3호
• /
• pp.77-86
• /
• 2000

The main objectives of this dissertation is to propose a forth generation index C for the case where the target value T is not equal to the midpoint of the specification limits (i.e. asymmetric tolerances), and show that this index is more sensitive compared to the standard PCI's in detacting small shifts of the process mean from the target value. In conclusion, in this dissertation , a new methods for estimating a measure of process capability for non-normally distributed variable data is proposed using the percentage nonconforming.

• 한국항해항만학회지
• /
• 제38권3호
• /
• pp.193-202
• /
• 2014

The comprehensive review of the STCW 1978, as amended in 1995 and associated Code was carried out from 2006 to 2010. These amendments will have a certain degree of impact on Maritime Education and Training(MET) institutes in terms of education and training of seafarer worldwide. Particularly, the Far East region countries are effected more than other regions since they covered about 30% of officers and 37% ratings in the world. In view of these facts this dissertation conceived to analyze the problems in the Far East main seafarer supply countries faced the implementation of "STCW Manila Amendments" To analyze these problems, this dissertation carried out questionnaire research to 7 targeted main MET of major Far East seafarer supply countries. After research this dissertation suggests the possible solutions such as, Joint On-Board Training Center; Joint Asia Maritime E-learning Systems; methods to reducing work-load, ship inspection burden and determine mandatory minimum safety manning standards in a safe way; technical cooperation fund to installation of training equipment; and clarify vague terminology of STCW Manila Amendments, to solve problems identified through the questionnaires.

• 천문학회보
• /
• 제43권2호
• /
• pp.40.3-40.3
• /
• 2018

This dissertation presents the results on two-dimensional Redshift space distortion (hereafter RSD) analyses of the large-scale structure of the universe using spectroscopic data and on improvement of modeling of the RSD effect. RSD is an effect caused by galaxies' peculiar velocity on their clustering feature in observation along the line of sight and is thus intimately connected to the growth rate of the structure in the universe, from which we can test the origin of cosmic acceleration and Einstein's theory of gravity at cosmic scales in the end. However, there are several challenges in modeling precise and accurate RSD effect, such as non-linearities and the existence of an exotic component, e.g. massive neutrino. As part of endeavors for modeling more precise and accurate galaxy clustering in redshift space, this dissertation includes a series of works for this issue. (More detailed descriptions were omitted.)

• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.193-198
• /
• 2004

This is the dissertation of the study of design characteristics about the practical flexible manufacturing system (PFMS). The basic ideas to analyze the manufacturing system which is the automatically operated is dependant on the various manufacturing procedures in factory. PFMS is the very useful equipment for students and trainee of production lines. This system is composed of hardware and software sub systems i.e. control and test unit and personal computer with software. The PFMS can be developed with design concepts and approved the capability of first article with functional tests. The PFMS module will be very useful for the manufacturing drill system in universities and practical fields. The flexible manufacturing systems have various subsystems appropriated for the final manufacturing products. Therefore the systems have the various kinds of hard wares as well as softwares. We study the software for the practical flexible manufacturing system designed in the Halla University and specially the design concept and using specification of the SCARA (Selective Compliance Assembly Robot Arm) robot which is used for the movement of the product is analyzed and introduced in this dissertation.

• 산경연구논집
• /
• 제8권1호
• /
• pp.15-22
• /
• 2017

Purpose - Retail companies are turning from one type of retailer to multiple business categories through various reasons, such as taking advantage of existed types of retailers' channel distribution, information and know-how, and entering into new types of retailers. However, there is few research conducted about multiple type of retailers. Research design, data, and methodology - In this research, the references, data and new stores on E-mart will be collected. The dissertation, annual report, statistical data, land-book of E-mart will be also collected to confirm whether E-mart has made any acquisition towards another company. Results - There is a tendency to new stores expansion, store enlargement and prolonging the opening preparation of new stores, based on the core of new stores expansion of E-mart as a general supermarket type of retailers. Based on general supermarket type of retailers, E-mart begins to diversify its retail company's type of retailers. Conclusions - As a general supermarket which is the most important type of retailers, E-mart is expanding into SSM type of retailers to seek new power of growth while slowdown growth is shown in general supermarket type of retailers. The expansion into SSM type of retailers would be a wise option as a retail company, E-mart is able to keep growing in the future.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권10호
• /
• pp.6185-6187
• /
• 2013

Cervical cancer has emerged as a major public health problem in Lucknow and New York in the $21^{st}$ century. Cancer genetic studies are essential to identify/stratify disease-susceptible individuals in a population-based cohort. Sample size homogeneity and North Indian caste in female urology genetic-studies are significant issues in meaningful interpretation of data. A review of scientific literature using Pubmed database was conducted, including an assessment of cervical cancer genetic studies conducted as part of the author's doctoral dissertation at a premier Lucknow-based medical research Institute. Sample size numbers and caste criteria in the North Indian cohort ($N{\leq}400$ subjects) were evaluated with homogeneity in the sample cohort data set(s). Subgroup caste-stratification of North Indian cohort is equally essential, for instance, Brahmin (e.g. Pandey), Vaishya (e.g. Mittal), Rajput (e.g. Singh) and Kshudra (e.g. Yadav) during the conception and design of genetics-based studies. Sample size homogeneity in histopathologically confirmed case and control numbers and caste-based stratification in a North Indian cohort is essential in single nucleotide polymorphism (SNP) studies in cervical cancer susceptible populations to draw more definitive conclusions.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.594-609
• /
• 1998

In this dissertation, a new process capability index $C_{psk}$ is introduced for non-normal process. The Pearson curve and the Johnson curve are selected for capability index calculation and data modeling the normal-based index $C_{psk}$ is used as the model for non-normal process. A significant result of this research find that the ranking of the seven indices, $C_p,\;C_{pk},\;C_{pm},\;C^{\ast}_{pm},\;C_{pmk},\;C_s,\;C_{psk}$ in terms of sensitivity to departure of the process median from the target value T=M from the most sensitive one up to the least sensitive are $C_{psk},\;C_{s},\;C_{pmk},\;C^{\ast}_{pm},\;C_{pm},\;C_{pk},\;C_p$. i.e, By the criteria adopted for evaluation of PCI's $C_{psk}$ is the most sensitive to the departure of the process median from target and $C_p$ is least

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.769-772
• /
• 1995

Most turbo machines, which operate at high speeds, such as gas turbines, jet engines, pumps, and compressors are prone to perrturbing vibrations. The best vibration control method for rotors is to eliminate destabilizing factors. Careful balancing application of "more stable" oil-lubricated bearing, such as tilting pad bearings or use of anti-swirl devices in seals, are examplse of passive vibration control methods. the use of magnetic bearing is an active control method. An obvious advantage of active control is that it provides damping (or modifies system stiffness or other parameters) only when there is a need for that, i.e., in emergency states, while not affecting the rotor normal operational conditions. Moreover, active control methods provide exact position control through on-line control. In this study, a magnetic actuator, digital contrliier using DSP, and bipolar operational power supply/amplifiers were developed to show the effectiveness of reducing robot vibration. Also the curve fitting procedure to obtain the transfer function of frequency dependent component was developed. Results presented in this dissertation will provide a well-defined technical parameters in designing magnetic damper system.er system.

• 한국과학교육학회지
• /
• 제10권1호
• /
• pp.119-125
• /
• 1990

The results of the analyses of 431 doctoral disserations of science education (Dissertation Abstracts International. 1980-1984) are as follows : 1. It was recognized that many countries as well as USA(e.g. Canada, Nigeria, Saudi Arabia, South Africa, Taiwan, Thailand, The Netherlands etc.) have deep interest in science education. 2. About 60% of dissertations had been focused on middle school (junior and senior)and college students as the subject of investigation. 3. Disciplines of science concerning the subject showed general science (35.6%), biology (18.3%), physics (11.4%), chemistry (11.4%), earth science (4.6%), and others (18.7%). 4. The number of dissertations belonging to experimental research was over 60 more than that of dissertations belonging to theoretical research. 5. In methodology of research, examination, test, questionaire were general method, and the field of research was focused mainly on the academic achievement.