• Journal of the Korean Institute of Gas
• /
• v.20 no.1
• /
• pp.23-28
• /
• 2016

"Eco-friendly" automobile has been a symbol of the Low Carbon, Green Growth strategy that Korea government decided to pursue. In line with the recent policy trend, a number of new LPG stations are being constructed. However, communities where mass storage are installed have been suffered from risk of serious accidents. In this work, economic analyses for different installation methods has been performed to prevent accidents in LPG filling station. The review shows that the underground storage is beneficial for the maintenance and the effective land use.

• Resources Recycling
• /
• v.14 no.3
• /
• pp.37-47
• /
• 2005

Global automobile manufacturers have made a lot of efforts to comply European Union (EU) end-of-life vehicles (ELVs) Directive. Hyundai and Kia have also made a lot of studies to eco-friendly treat our ELVs. Some results of studies have already reflected on our models to produce eco-friendly vehicles. This paper introduces our status of the recycle technology and our measures to respond to EU ELVs Directive.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.76-81
• /
• 2011

Fossil fuel, the energy source of internal combustion engine automobiles, is limited in resource and has caused environmental issues for decades. Accordingly, automobile manufacturers from many countries around the world are developing or producing eco-friendly vehicles that utilize alternative sources of energy. These vehicles are equipped with many electronic and electrical components which operate on high voltage and/or large current that were not used in conventional combustion engine automobiles. In this paper, in order to analyze the electro-magnetic interference noise, electric vehicles and fuel cell electric vehicles are tested under the guidelines of KMVSS (Korean Motor Vehicle Safety Standards) as well as under test modes that are not stipulated under the guidelines.

• International Journal of Aerospace System Engineering
• /
• v.3 no.1
• /
• pp.21-24
• /
• 2016

In this study, a optimal design on the hood automotive using eco-friendly natural fiber composites is performed. The hood of an automobile is determined by dividing the Inner panel shape through optimization phase to outer panel and inner panel. It was performed to optimize the size of the thickness of the inner panel and the outer panel by applying a flax/epoxy composite materials. The optimized shape was evaluated for weight-lightening, stability and the pedestrian collision safety. Through the resin flow analysis are confirmed to molding possibility judgment of product.

• Journal of the Korean Society of Safety
• /
• v.29 no.3
• /
• pp.14-19
• /
• 2014

The global demand for reduction in the weight of automobiles has led many countries to focus on the development of hybrid, eco-friendly, and electric cars. Reduction in the weight of materials can both increase fuel efficiency and maximize automobile performance. Therefore, the design of automobile should be inclined towards the safety aspects. but at the same time, it also consider reducing the structural weight of an automobile. In this study, CFRP side members with circular and double hat shaped section was manufactured. The impact collapse tests performed with change of the stacking condition, such as variation of interface number and outerlayer angle. The impact collapse load and absorbed energy were quantitatively analyzed according to the changes in section shapes and stacking condition. This analysis was performed to obtain design data that can be applied in the development of optimum lightweight members for automobiles.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.130-135
• /
• 2018

Currently the automobile market is developing eco-friendly vehicles in order to cope with fuel efficiency regulations. Many studies have been conducted to improve travel performance and fuel economy of the environment-friendly vehicles, and vehicle manufacturers study how to manufacture light-weight vehicles for improving fuel economy for both existing vehicles and environment-friendly vehicles. Exemplary light-weight vehicle technologies include optimal design of vehicle body structure which is a light-weight vehicle method by changing component shapes or layout to optimize the vehicle body structure and the new process technology for using new light-weight and very strong materials Various studies.

• Journal of ILASS-Korea
• /
• v.27 no.4
• /
• pp.195-202
• /
• 2022

Recently, the global automobile market is rapidly changing from internal combustion engine vehicles to eco-friendly vehicles including electric vehicles. Among eco-friendly vehicles, LPG vehicles are low in fine dust and are suggested as a realistic way to replace diesel vehicles. In addition, it is more economical than gasoline in its class, showing a cost-saving effect. In Korea, the business of converting gasoline into LPG is active. Research is being conducted to apply this to hybrid vehicles. In this study, the difference in energy consumption efficiency was analyzed when LPG fuel was applied by selecting a 2-liter GDI hybrid electric vehicle. The operation of the hybrid system according to various driving characteristics was confirmed by selecting the WLTC mode. As a result, it was confirmed that the BSFC was about 5% lower than that of gasoline fuel when using LPG fuel. This is due to the active operation of the motor while driving. Optimization is required as battery consumption increases from an energy perspective.

• Elastomers and Composites
• /
• v.47 no.1
• /
• pp.65-74
• /
• 2012

Recently, the need of developing eco-friendly materials has been required with restriction strengthening on environment and energy saving by the resource depletion worldwide. These trends are not an exception in transport industry including automobile. In addition, these materials have to fulfill not only the high quality and cheap price but also the high-performance which meet the needs of costumer and society. Among the various materials, carbon fiber-reinforced composite which is actively studying for lightweight of the automobile is one of the most suitable candidates. Indeed, the carbon fiber-reinforced composites are used as the essential materials to substitute body and other parts in automobile and the demand is increasing largely. Carbon fiber-applied automobile has improved brake, steering, durability and high fuel efficiency, leading to the energy conservation and minimizing carbon dioxide emissions. This paper focuses on the necessity of carbon fiber-reinforced composites for lightweight of automobile and its technical trends.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.181-186
• /
• 2022

The world's electric automobile sector has shifted beyond technological environmental changes to a stage that has an impact on the market environment. And automakers are shifting from the existing strategy of "technological advantage → brand enhancement → sales expansion of existing internal combustion engine vehicles" to the expansion of the electric automobile market itself, which is to enhance market competitiveness. In addition, competition in the electric automotive parts market is expected to intensify due to the expansion of the business areas of existing parts makers and the entry of new companies, and development cooperation is expected to actively proceed to improve the efficiency of major eco-friendly parts. Along with this prospect, electric vehicles are expected to change the overall structure of the automobile industry, the overall growth of the electric vehicle value chain such as batteries, power trains (motors, power management and control systems), electric vehicle production, and charging infrastructure Is expected. Therefore, in this thesis, in order to cultivate a variety of high-quality human resources that companies want to keep pace with the changing automobile industry, we study a professional manpower training program that leads the growth engine of the electric automobile industry.

• Clean Technology
• /
• v.20 no.3
• /
• pp.232-240
• /
• 2014

The significance of thermoplastic polyolefin polypropylene (PP) lies in its potential to replace polyvinyl chloride (PVC), the most widely used material for automobile interiors (door trim, dash board), which discharges harmful compounds in certain conditions. Another benefit of PP (0.855 amorphous - 0.946 crystalline $g/cm^3$) is its low density compared to that of PVC ($1.1-1.45g/cm^3$), which reduces vehicle weight. Market demand for eco-friendly water-based adhesive/coating material is rising significantly as a substitute for solvent-based adhesive/coating material which emits VOC and causes harmful working conditions. Under such context, in this study, a series of eco-friendly waterborne polyurethane-urea primer (a paint product that allows finishing paint to adhere much better than if it were used alone) for hydrophobic PP were prepared from different mix of DMPA content, NCO/OH molar ratio, various wt% of silicone diol and various soft segment content, among which DMPA of 21 mole %, NCO/OH molar ratio of 1.2, modified silicone diol of 5 wt% and soft segment content of 73 wt% led to good adhesion strength. Additionally, the incorporation of optimum content of additives (0.5 wt% dispersing agent, 0.5 wt% levelling agent, 1.5 wt% antifoaming agent, 3.0 wt% matting agent) into the optimum waterborne polyurethane-urea also enabled good stability, levelling, antifoaming and non-glossy.